Τύπος συναρμολόγησης

Durendus Richtpresse

Κατάσταση: καινούργιο, δύναμη συμπίεσης: 200 t, DURENDUS DPS-200 – Hydraulic Gantry Straightening Press – 200 t – 1,500 × 2,000 mm The machine shown here has already been built and delivered as a customer-specific order. We can manufacture a new machine of this type for you at very short notice. This is a hydraulic gantry straightening press from DURENDUS with a maximum press force of 200 t. The machine features a table size of 1,500 × 2,000 mm, a maximum installation height of 800 mm, and a stroke of 400 mm, making it ideally suited for straightening work, pressing processes, as well as applications in steel construction and toolmaking. Options (on request): The listed options are based on realized customer projects and allow targeted adaptation of the machine for the respective application. The basic machine serves as a functional standard version – in practice, it is most often upgraded with additional equipment and project-specific configurations. Examples include: * Siemens S7-1200 PLC + 7” display * Remote control operation * Safety bar at the bottom of the gantry columns (600 mm) * Table with T-slots * Motorized bridge travel * Extended travel range * Increased open height * Floor light curtain below the bridge * Laser distance measurement * Lifting cylinder in the table ##### Technical Data & Information: Hydraulic Gantry Straightening Press – 200 t – 1,500 × 2,000 mm ==== General Information Manufacturer: DURENDUS Model: DPS-200 Design: Gantry Press / H-Frame Press force: 200 t (adjustable) Total weight: approx. 8,500 kg Dimensions (W × D × H): approx. 2,450 × 2,200 × 2,750 mm Distance between columns: 1,580 mm Table height: 900 mm ==== Working Area Table size: 1,500 × 2,000 mm Djdpeyzfuiofx Aabocg Max. installation height: 800 mm Ram stroke: 400 mm Ram extension: 300 mm ==== Movement System Lateral cylinder adjustment: ±750 mm Bridge travel distance: 1,500 mm Operation: manual adjustment (cylinder and bridge) ==== Hydraulic Cylinder Max. operating pressure: 320 bar Working speed: 9 mm/s Return speed: 17 mm/s ==== Hydraulics & Drive Motor power: 15 kW Pump output: 32 l/min Tank volume: 140 l Hydraulic components: DUPLOMATIC Filter: FILTREC Cooling: Air cooler ==== Control System Operation: manual via hand lever valve Integrated safety PLC Components: SIEMENS Optional: PLC S7-1200 with 7" touch panel, recipe management, pressure and stroke control ==== Safety Hydraulic overload protection Electronic overload protection Upper/lower end position switches CE-compliant design ==== Electrical Connection Main power supply: 400 V AC Control voltage: 24 V DC Frequency: 50 Hz Total connected load: approx. 18 kW Control cabinet: IP54 ##### Fields of application: straightening, pressing, forming, tool adjustment, steel construction, metalworking, mold making, automotive Hydraulic press, gantry press, straightening press, H-frame press, 200 t press, tryout press, tool try-out press, adjustable press, heavy-duty press The images shown are for sample purposes and may differ from the actual machine.

Κατάσταση: καινούργιο, δύναμη συμπίεσης: 300 t, 300 t portal straightening press – portal press – 3,500 × 2,000 mm table, 1,000 mm open height The machine shown here has already been manufactured and delivered according to a customer order. We can manufacture this machine for you again at very short notice – including individual options upon request. This is a hydraulic portal press with 300 t pressing force for straightening, assembly, and machining processes of large-scale components. Base price: €142,000 net Options (on request): The listed options are based on realized customer projects and allow the machine to be precisely adapted to the specific application. The base machine is a functional standard version – in practice, it is regularly expanded with additional equipment and project-specific configurations. - Table plate with T-slots according to DIN 650 - 75 mm table plate thickness - Servo hydraulics (energy-efficient operation) - SIEMENS S7-1200 control system with 7" touch panel - Wireless remote control (with or without display) - Air/oil heat exchanger - Ejector system in the table (various designs available) ==== Technical Data + Information: ==== General Design: Portal press Pressing force: 300 t (adjustable) Total weight: approx. 10,500 kg Overall dimensions (W × D × H): 3,285 × 3,520 × 3,500 mm ==== Working area Table size: 3,500 × 2,000 mm Open height: 1,000 mm Frame clearance: 2,100 mm ==== Table & Ram Table height: 750 mm (without table plate) Ram stroke: 0–400 mm (adjustable) Extensions: 200 / 400 / 600 mm Cylinder diameter: Ø 310 mm Piston rod: Ø 220 mm Transverse cylinder travel: ±900 mm Portal longitudinal travel: 3,000 mm Dsdpfx Asyxnzyeabecg ==== Speeds Rapid traverse: 10 mm/s Return speed: 50 mm/s Portal traverse speed: max. 33 mm/s ==== Hydraulics & Drive Pump capacity: 70 l/min Main motor: 7.5 kW Hydraulic tank: 200 l Pressure accuracy: ±5 bar Hydraulic system: DUPLOMATIC ==== Controls & Operation Standard operation: lever control Optional: SIEMENS S7-1200 controller Power supply: 400 V / 50 Hz Total connected load: approx. 15 kW ==== Equipment - CE certification - Safety limit switches - Overload protection (electrical & hydraulic) - Drag chain system - Two-coat finish (RAL colors selectable) ===== Straightening of large steel components, vehicle construction, maintenance, assembly work, special fabrications Portal press, straightening press, hydraulic press, 300 ton press, large table press, metalworking Are you looking for a hydraulic press tailored to your specific application? Contact us for an individual quote. Our hydraulic presses are manufactured in accordance with German machinery directives as well as European Machinery Directive (2006/42/EC), EC standards, and EU safety regulations. In addition, our presses exceed Canadian and European safety requirements, as they fully comply with Brazilian national safety standard NR 12, which builds on these standards. Our core competency is special-purpose machine construction and press automation. We supply custom hydraulic presses at surprisingly competitive prices. For the hydraulics, we mainly use components from leading European manufacturers.

Κατάσταση: καινούργιο, δύναμη συμπίεσης: 300 t, 300 T Gantry Straightening Press – Gantry Press – 3,000 × 2,000 mm Table, 1,000 mm Open Height The machine shown here was custom-built and delivered for a client. We can manufacture this machine for you at short notice – tailored to your specific requirements if desired. This is a hydraulic gantry press with a pressing force of 300 t, designed for straightening, assembly, and processing of large-format components. Base price: €102,000 net Options (on request): The listed options are based on completed customer projects and allow precise adaptation of the machine to your application. The base version is a functional standard machine – in practice, it is usually upgraded with additional features and project-specific configurations. - Table plate with T-slots to DIN 650 - 75 mm table plate - Servo hydraulics (for energy-efficient operation) - SIEMENS S7-1200 controller with 7" touchscreen - Wireless remote control (with or without display) - Air/oil heat exchanger - Ejector system in the table (various versions) ==== Technical data + information: ==== General information - Design: Gantry press - Pressing force: 300 t (adjustable) - Total weight: approx. 8,500 kg - Overall dimensions (W × D × H): 3,285 × 3,020 × 3,500 mm ==== Working area - Table size: 3,000 × 2,000 mm - Open height: 1,000 mm - Distance between frames: 2,100 mm ==== Table & Ram - Table height: 750 mm (without table plate) - Ram stroke: 0–400 mm (adjustable) - Extensions: 200 / 400 / 600 mm - Cylinder diameter: Ø 310 mm - Piston rod: Ø 220 mm - Cross travel cylinder: ±900 mm - Longitudinal travel gantry: 2,500 mm ==== Speeds - No-load speed: 10 mm/s - Return speed: 50 mm/s - Gantry travel speed: max. 33 mm/s ==== Hydraulics & Drive - Pump capacity: 70 l/min - Main motor: 7.5 kW - Hydraulic tank: 200 l - Pressure accuracy: ±5 bar - Hydraulic system: DUPLOMATIC ==== Control & Operation - Standard operation: lever control - Optional: SIEMENS S7-1200 controller - Connection: 400 V / 50 Hz - Total connected load: approx. 15 kW ==== Equipment - CE certification - Safety limit switches - Overload protection (electrical & hydraulic) - Drag chain system - Two-coat paintwork (RAL colours selectable) Dodpfx Asyxnw Uoabscg ===== For straightening steel components, vehicle construction, maintenance, assembly work, special structures Gantry press, straightening press, hydraulic press, 300 ton press, industrial press, metalworking Looking for a hydraulic press tailored to your application? Contact us for a customised offer. Our hydraulic presses are manufactured in accordance with German and European machinery directives (Directive 2006/42/EC), EC standards, and EU safety requirements. Furthermore, our presses exceed Canadian and European safety standards as they comply with all aspects of the Brazilian national safety regulation NR 12, which builds on these standards. Our key strength is special-purpose machinery construction and press automation. We offer custom-made hydraulic presses at surprisingly competitive prices. For the hydraulics, we use components primarily from leading European manufacturers.