καντιλιβερική ραφιέραFischer
καντιλιβερική ραφιέρα
Fischer
Έτος κατασκευής
2020
Κατάσταση
Μεταχειρισμένο
Τοποθεσία
Nattheim 

Στοιχεία για το μηχάνημα
- Ονομασία μηχανήματος:
- καντιλιβερική ραφιέρα
- Κατασκευαστής:
- Fischer
- Έτος κατασκευής:
- 2020
- Κατάσταση:
- μεταχειρισμένο
Τιμή & Τοποθεσία
- Τοποθεσία:
- Daimlerstr. 21, 89564 Nattheim, DE

Καλέστε
Λεπτομέρειες προσφοράς
- Αναγνωριστικό αγγελίας:
- A22022018
- Αριθμός αναφοράς:
- NL-K-26001
- Ενημέρωση:
- τελευταία στις 30.05.2026
Περιγραφή
FISCHER – Cantilever Rack for Installation in Indoor Areas
The rack must not be clad on site without prior consultation with FISCHER.
Technical specification according to the service description:
Rack No. 1 – single-sided (cantilever arms bolted)
Number of racks: The following data refers to one rack.
- 1 unit
- Number of uprights: 3 pcs
- Rack length (axle dimension): 2,500 mm
- Upright spacing: 2 x 1,250 mm
- Upright height (hole grid 100 mm): approx. 2,500 mm
- Top storage level: 2,200 mm
- Foot length first/second side: 2,000 / 0 mm
- Cantilever arm length (total incl. guard): 2,000 mm
- Cantilever arms first/second side: 4 / 0 pcs
- Required load capacity per cantilever arm: 500 kg
- Load capacity per upright side (excluding feet): 2,000 kg
- Max. floor load: 0.11 kN/cm²
- Shipping weight per rack: 607 kg
- Upright color: flame red, similar to RAL 3000
- Cantilever arm color: flame red, similar to RAL 3000
- 1 spray can
The profile thickness applies to 100% utilization of the rack load capacity.
Seismic zone could not be determined. Verifiable or certified structural analysis available at extra cost.
Note on structural calculation:
Important note regarding the structural calculation of the storage equipment: The structural calculations are based on Eurocode (DIN EN 1991-1-1, DIN EN 1991-3, and DIN EN 1991-1-4) and the respective national annexes (NA) applicable in the countries where installation occurs. Since storage equipment is usually installed in urban or industrial areas, the relevant requirements for these locations (e. g. site category III and IV for Germany) are included in the calculation.
Pjdpszab Rcefx Af Aspt
Important note on building permits, please note:
Storage equipment may be subject to approval according to the respective state building codes. In case of an order to Fischer, the customer is obliged to obtain all necessary public-law permits for the storage equipment. If a permit is not granted or is revoked, Fischer is not liable for this. If Fischer is to carry out assembly, it is always assumed that a valid building permit exists at the time of assembly. If a verifiable structural analysis is required for the building permit application, we can provide this at extra cost – please contact us.
Cantilever rack 1 pc: €1,500.00
Foot rounding as a safety element 3 pcs: €13.50 per foot and side
Storage location: Customer
Η αγγελία μεταφράστηκε αυτόματα. Ενδέχεται να υπάρχουν σφάλματα μετάφρασης.
The rack must not be clad on site without prior consultation with FISCHER.
Technical specification according to the service description:
Rack No. 1 – single-sided (cantilever arms bolted)
Number of racks: The following data refers to one rack.
- 1 unit
- Number of uprights: 3 pcs
- Rack length (axle dimension): 2,500 mm
- Upright spacing: 2 x 1,250 mm
- Upright height (hole grid 100 mm): approx. 2,500 mm
- Top storage level: 2,200 mm
- Foot length first/second side: 2,000 / 0 mm
- Cantilever arm length (total incl. guard): 2,000 mm
- Cantilever arms first/second side: 4 / 0 pcs
- Required load capacity per cantilever arm: 500 kg
- Load capacity per upright side (excluding feet): 2,000 kg
- Max. floor load: 0.11 kN/cm²
- Shipping weight per rack: 607 kg
- Upright color: flame red, similar to RAL 3000
- Cantilever arm color: flame red, similar to RAL 3000
- 1 spray can
The profile thickness applies to 100% utilization of the rack load capacity.
Seismic zone could not be determined. Verifiable or certified structural analysis available at extra cost.
Note on structural calculation:
Important note regarding the structural calculation of the storage equipment: The structural calculations are based on Eurocode (DIN EN 1991-1-1, DIN EN 1991-3, and DIN EN 1991-1-4) and the respective national annexes (NA) applicable in the countries where installation occurs. Since storage equipment is usually installed in urban or industrial areas, the relevant requirements for these locations (e. g. site category III and IV for Germany) are included in the calculation.
Pjdpszab Rcefx Af Aspt
Important note on building permits, please note:
Storage equipment may be subject to approval according to the respective state building codes. In case of an order to Fischer, the customer is obliged to obtain all necessary public-law permits for the storage equipment. If a permit is not granted or is revoked, Fischer is not liable for this. If Fischer is to carry out assembly, it is always assumed that a valid building permit exists at the time of assembly. If a verifiable structural analysis is required for the building permit application, we can provide this at extra cost – please contact us.
Cantilever rack 1 pc: €1,500.00
Foot rounding as a safety element 3 pcs: €13.50 per foot and side
Storage location: Customer
Η αγγελία μεταφράστηκε αυτόματα. Ενδέχεται να υπάρχουν σφάλματα μετάφρασης.
Αυτές οι αγγελίες μπορεί επίσης να σας ενδιαφέρουν.
Μικρή αγγελία
Borken
1.833 km
Συσκευή μέτρησης πάχους στρώματος με λογισμικό και υπολογιστή
Fischer FISCHERSCOPEX-RAY XDL 240 XRF
Fischer FISCHERSCOPEX-RAY XDL 240 XRF
Μικρή αγγελία
España
2.186 km
ευέλικτη εκτυπωτική μηχανή (φλεξογραφική πρέσα)
Fischer & KreckeFlexpress 16S/10
Fischer & KreckeFlexpress 16S/10
Μικρή αγγελία
Oelde
1.767 km
Εξοπλισμός μέτρησης
JOHANN FISCHERMesswinkel Measuring Angle
JOHANN FISCHERMesswinkel Measuring Angle
Μικρή αγγελία
Louny 1
1.402 km
Μηχανή φλεξογραφικής εκτύπωσης FISCHER & KRECKE
Fischer & Krecke31 DF
Fischer & Krecke31 DF
Μικρή αγγελία
Eislingen/Fils
1.443 km
Φρένο πίεσης - υδραυλικό
FISCHERHAKS 10/3200
FISCHERHAKS 10/3200
Μικρή αγγελία
Goldenstedt
1.839 km
Φρένο πίεσης - υδραυλικό
FISCHERDAP 5 /1500
FISCHERDAP 5 /1500
Μικρή αγγελία
Bruchsal
1.538 km
πλάκα μέτρησης / Johann Fischer
Johann Fischer AschaffenburgMessplatte / Messtisch
Johann Fischer AschaffenburgMessplatte / Messtisch
Μικρή αγγελία
Wymysłów
1.472 km
μετρητικό σύστημα
Fischer DUALSCOPE DMP40Fischer DUALSCOPE DMP40
Fischer DUALSCOPE DMP40Fischer DUALSCOPE DMP40
Μικρή αγγελία
Günzburg
1.394 km
Φρένο πίεσης - υδραυλικό
FISCHERDAP 20/4100 NG
FISCHERDAP 20/4100 NG
Μικρή αγγελία
Bruchsal
1.536 km
Πακέτο ραφιών με βραχίονες Fischer
FISCHER
FISCHER
Η αγγελία σας διαγράφηκε με επιτυχία
Παρουσιάστηκε σφάλμα




























































































