καθολική δοκιμαστική μηχανή / μηχανή εφελκυστικής δοκιμής

Hegewald & Peschke Inspekt Table Blur 5

Universal Testing Machine Inspekt Table Blue 5kN

Mechanical Construction:

- 2 backlash-free recirculating ball screws, driven by DC servo motor, Fmax = 10 kN, stiffness 10 kN/mm
- 1 test space up to nominal load:
- Test space width: 420 mm
- Max. test stroke without test tools, adapters, and load cells: 1025 mm

Travel Speeds:

- Testing speed: 0.0015 – 1000 mm/min at full load
- Return speed: 1000 mm/min

Force Measurement:

- Measurement range: 0.8 – 100% of nominal load, accuracy class 1 (optionally class 0.5)
(±1% of displayed value according to DIN EN ISO 7500-1)
- Force measurement resolution: ±180,000 digits at 20ms integration time

The machine is delivered with a factory test certificate. If factory or DKD calibration is requested on site, this will be charged separately.

Crosshead Travel Measurement:

- Incremental square-wave input with encoder monitoring, storage of crosshead position
- Crosshead travel resolution: 1 µm

Dimensions (WxDxH) / Weights:

- Load frame: 685 mm x 550 mm x 1420 mm / 100 kg – controller mounted on the load frame

Gusdpfx Adeyyu I Njgja
Standard Features:

- Force, displacement and strain control
- Overload protection, automatic force calibration
- Specimen break detector, return function
- Setup operation via control panel with display (force, displacement)

Data Processing:

- USB 2.0 interface or LAN
- Data transfer rate to PC: 50 Hz (standard), optionally higher data acquisition frequency via special software module
- Internal data processing rate: 2 ms
- Optional: max. 2 free slots for additional sensor expansion cards (1-channel analog or 2-channel digital cards)


115/230 VAC, 0.5 kVA, 50/60 Hz, 5–40°C, 20–80% relative humidity
Required options for operation: load cell, grips, PC (current standard, OS 8-10-11), test software


Load Cell 5000N
- Measurement range: 5–5000N tension and compression, nominal 2mV/V output signal, overload protection: ±100%, linearity: ±0.05%, hysteresis: ±0.03%, reproducibility: ±0.02%, incl. 1.5m connection cable and calibration certificate.
- Supplied with Extensometer MFX 200

The strain gauge MFX 200-B, due to its robust construction and high measurement accuracy, is suitable for almost all specimens with an initial gauge length from 10 mm. All strains can be measured from E-modulus up to specimen break. Its use is fully possible in both the lower and upper testing areas. In conjunction with the MFQ-A, r- and n-value determination on sheet metal is possible. Two different measuring systems are available, which differ in measuring signal and additional technical data (see technical documentation).

Η αγγελία μεταφράστηκε αυτόματα. Ενδέχεται να υπάρχουν σφάλματα μετάφρασης.