Πρέσα δεμάτων 100 τόνων με μεταφορική τεχνολογία VK 8818 R-FU

HSM GmbH + Co. KG, Deutschland VK 8818 R-FU

Technical Data Press:

Manufacturer: HSM GmbH + Co. KG, Germany
Model: VK 8818 R-FU
Year of manufacture: 2015
Operating hours: 19,750 hours (as of July 2025)
Number of bales pressed: 24,760 bales (as of July 2025)
Main press force: 1,000 kN
Specific press force: 120 N/cm²
Cutting-edge ejector press force: 121 kN
Feed chute dimensions: 970 x 1,800 mm
Theoretical cycle time (idle): 8.3 seconds
Theoretical throughput: 643 m³/hour
Bale dimensions: 1,100 x 750 mm (length adjustable from 600 to 2,000 mm)
Drive power: 2 x 45 kW, frequency controlled
Connected load: 110 kW
Total current consumption: 213 A
Circuit protection: 250 A (slow-blow)
Tying: 5-fold horizontal, fully automatic
Throughput at bulk density of:
- 20 kg/m³: 12.86 t/hour
- 50 kg/m³: 32.15 t/hour
Bale weight (at approx. 1.2 m length): 650 to 750 kg/bale, depending on material
Hydraulic oil tank capacity: 2,000 L HVI 46
PLC control: Siemens S7-300
Operator panel: Siemens TP 700
Press dimensions (installed): 12,130 x 4,800 x 3,270 mm (L x W x H)
Installation dimensions with conveying technology: 35,000 x 8,480 x 7,745 mm (L x W x H)
Press weight: approx. 33 t (main press approx. 12 t, press channel with bale clamp approx. 10 t)

Special machine equipment:
- Access interlock via key transfer system
- Electrohydraulic locking of the press carriage during tying, so the press ram maintains its position with highly expansive materials

Additional optional equipment ordered:
- Frequency-controlled main drive, 2 x 45 kW, up to 40% energy savings compared to standard 2 x 45 kW motors, with equivalent performance
- Manual activation/deactivation of strapping wires to save wire with non-expansive materials
- Cutting-edge ejector with 121 kN press force
- Wire break and end detection, with press shutoff
- Bale chute
- Visual warning signal, mounted on switch cabinet

Condition of the press:
The complete system (baler and conveying equipment) is in good, ready-to-use condition. The operator cleans, greases, and services it weekly according to the manufacturer's specifications.

Technical data for chain belt conveyor:

Djdpfexb Dvvox Acujwc
Manufacturer: Stadler Anlagenbau GmbH
Model: Chain belt conveyor KF 1800
Year of manufacture: 2015
Belt speed: 0.36 m/s
Feed belt length: 7,000 mm
Incline belt length: 14,500 mm
Gooseneck length: 1,550 mm
Incline: 30°
Nominal width: 1,800 mm
Useable width: 1,638 mm
Overall conveyor height: 7,745 mm
Pit dimensions for conveyor: 11,200 x 3,000 x 1,250 mm (L x W x H)

Scope of delivery:
Includes the infeed conveyor, cross distribution conveyor, and baler with bale chute—without wire take-up stations and without wire.

Remarks:
Documentation (operating manual, CE declaration, electrical/hydraulic schematics) is complete. Inspection by appointment. No liability for technical data or possible errors.

Η διαφήμιση μεταφράστηκε αυτόματα και ενδέχεται να περιέχει ορισμένα σφάλματα μετάφρασης.