MAIR / SIGNODE Αυτόματη συσκευαστική και μηχανή ταινιοδεσίας

MAIR / SIGNODE Automatic packing & strapping machine

MAIR Automatic Packaging Machine, MPS RH150/D/4/SL

& SIGNODE Automatic Strapping Unit M400

1. MAIR PACKAGING MACHINE, model MPS RH150/D/4/SL

The MPS RH150/D/4/SL Pat. model automatically packages round tubes into hexagonal bundles. The machine allows the strapping operation to be performed automatically at a fixed position, with the bundle moving laterally and stopping automatically at the programmed strapping positions.

It consists of:

- Four-tube chain conveyors with support teeth and intermittent drive for lifting one tube at a time from the threading machine to the alignment area.
- A drive roller for aligning the tube against an adjustable end stop prior to row formation.
- Two storage areas for tubular rows; necessary during the bundle evacuation cycle.
- A robust, welded structural steel bridge frame.
- A tube row handling system that picks one row at a time from the second row storage and places it onto the bundle-forming supports.
- Handling is performed by a series of electromagnets that rotate during the row transfer cycle.
- Four powered vertical bundle forming and holding supports. These are equipped with adjustable blades to suit the required bundle size and shape and are lowered to allow the bundle to be placed onto the evacuation carriage.
- Powered evacuation carriage, gliding on floor-mounted rails and equipped with powered lower rollers and pairs of free vertical retaining rollers.
- Motorized flat conveyor to transport the bundle after the strapping area.
- Powered storage chains suitable for advancing the bundles to the selected quantity.
- Drainage station for lifting the bundle, allowing the coolant to drain from the tubes; equipped with two hydraulic devices powered by a hydraulic power unit.
- Control cabinet.

2. SIGNODE AUTOMATIC STRAPPING STATION, model M400

The formed bundle is automatically transferred by the powered rollers of the evacuation carriage to the automatic system.

It will stop at the programmed strapping positions to allow automatic application of steel strapping.

It consists of:

- SIGNODE automatic strapping machine, model M400/PA/TSM, for vertical strapping
- Floating pneumatic strapping head for steel strap, 32 mm wide (1¼") and 0.9 mm wall thickness
- 450 kg strap dispenser with electric pay-off
- Control panel

3. WEIGHING STATION, model KG8/DY

The station weighs the tube bundles via load cells. The powered storage chains transfer the bundles to the weighing position. The weighing station is located below the pneumatic lifting devices that raise the bundle for the weighing operation.

It consists of:

- Lower frame for floor mounting, complete with four supports, hooks, and load cells
- Upper retaining frame, capable of receiving the bundle lifting devices
- Compact weight transmitter

4. SOFTWARE, model DATAPACK 3/T

The Datapack Management System software enables the operator to:

- Monitor and supervise tube production in real time.
Iedpfxeymahyj Ap Asih
- Set up a new bundle configuration c...

Η αγγελία μεταφράστηκε αυτόματα. Ενδέχεται να υπάρχουν σφάλματα μετάφρασης.