Φορτηγό βαρέως τύπου

MAN MAN 8x4 Hydro mit F1150 inkl Jib und Winde Korb

MAN 8x4 Hydrodrive with F1150 Fassi Loader Crane

Vehicle description for: TGS 35.520 8x2H-6 BL CH

Removable flatbed, Jost fifth wheel coupling, fully clad in V2A stainless steel

Trade tonnage: 35 t
Main wheelbase: 2,980 mm
Wheelbase between front axles: 1,795 mm
Wheelbase between rear axle and tag axle: 1,350 mm
Exhaust silencer, side-mounted, right
Exhaust outlet to ground
2 batteries, 12V, 210 Ah, Super Longlife (AGM), maintenance-free, for increased electrical requirements
Fuel tank capacity: 390 l, left side
AdBlue tank capacity: 35 l, right side
Air compressor, 1-cylinder, 360 cc, with economy system
Air processing unit, pneumatically controlled
Air reservoir, steel
Electronic Braking System (EBS)
Anti-lock Braking System (ABS)
Emergency brake assist
Disc brakes on front axle
Disc brakes on second front axle
Disc brakes on rear axle
Disc brakes on tag axle
Emergency brake signal, hazard warning activation
Side marker lights, LED
MAN diesel engine D2676 LFAX, 382 kW (520 hp), 2,650 Nm torque, Euro 6e
Fuel filter, heated, for fuels up to cleanliness class 25
Pre-fuel filter with oil/water separator, water sensor, heated (mixing valve)


F1150RA.2.28 L616 Winch + 2-person basket (optional at extra charge)

Endless slewing range
All hydraulic cylinders double-acting
Piston rods hard-chromed
Double linkage system with PROLINK (overextending jib up to 12°)
Electronic overload cut-off with FX900
FASSI stability control FSC incl. LMB II
Emergency stop and visual alarm (at 90% and 100%)
Pressure relief and load-holding valves
XF System (Extra Fast) + XP System (Extra Power) + FL System (Full Lift)
RCH or RCS FASSI radio remote control with proportional levers, pressure display (bar and %), and 90%/100% warning on display
Danfoss D900 control block with 4 control valves mounted on the crane column
Emergency operation for crane control
High-pressure filter supplied plumbed
Separate hydraulic tank (260 l) with filter and oil cooler mounted at the crane base
Hydraulic outriggers, hydraulically extendable on both sides, outrigger width 8.84 m
Outriggers operable via radio with proportional control block
IMC System (Integral Machine Control) and ADC (Automatic Dynamic Control)—load-dependent speed control
Standard colour RAL 3020 (traffic red)—all cylinders painted black
Load hooks and attachment brackets (short / 500 mm)
Transport position: folded transverse to direction of travel
Note: Observe vehicle electrical system voltage - 12V or 24V, standard 24V

FASSI stability control FSC-S/II 1
IE742 terminal box
Low-profile base
180° hydraulically tiltable outriggers, both sides
Control unit for auxiliary function: winch / xhe-dynamic
Control system for 2 auxiliary functions with 2 hose guides / xhe-dynamic

Prepared for operation with variable displacement pump (LS)
Work lights controllable via display (black and white function)
1 LED work light mounted on articulated jib
LEDs for 2 outriggers, not mounted (crane)
LEDs for 2 outriggers, not mounted (auxiliary stabilizer)
GR.15 electrical rotary distributor with 15 slip rings
FUNK-V7-RCS
V7 RCS radio remote control
Fassi radio remote control V7S:
Available with 6 or 8 functions with proportional levers or joysticks.
V7S with 4.3" colour display / 24 bit - 480 x 272 px, with 8 push-buttons
Engine start/stop, rpm +/-, 6x ON/OFF functions, 10 m cable and various working speed controls, incl. spare battery, charger, neck and waist strap
Iiodpfxowmh Hrj Aaaoh

Η διαφήμιση μεταφράστηκε αυτόματα και ενδέχεται να περιέχει ορισμένα σφάλματα μετάφρασης.