Γραμμή παραγωγής προφίλ PVC (500x100 mm)Weber & Blake
DS-85 & 203-3-4,0 & 303-1600-270
Γραμμή παραγωγής προφίλ PVC (500x100 mm)
Weber & Blake
DS-85 & 203-3-4,0 & 303-1600-270
Έτος κατασκευής
1997
Κατάσταση
Μεταχειρισμένο
Τοποθεσία
Rhede 

Προβολή φωτογραφιών
Εμφάνιση χάρτη
Στοιχεία για το μηχάνημα
- Περιγραφή μηχανήματος:
- Γραμμή παραγωγής προφίλ PVC (500x100 mm)
- Κατασκευαστής:
- Weber & Blake
- Μοντέλο:
- DS-85 & 203-3-4,0 & 303-1600-270
- Έτος κατασκευής:
- 1997
- Κατάσταση:
- εργοστασιακά ανακατασκευασμένο (μεταχειρισμένο)
- Λειτουργικότητα:
- πλήρως λειτουργικό
- Ώρες λειτουργίας:
- 216 h
Τιμή & Τοποθεσία
- Τοποθεσία:
- 46414 Rhede, Deutschland

Κλήση
Τεχνικές λεπτομέρειες
- Εξοπλισμός:
- τεκμηρίωση / εγχειρίδιο
Λεπτομέρειες προσφοράς
- ID Καταχώρησης:
- A21170432
- Αριθμός Αναφοράς:
- Profilanlage Weber DS-85
- Τελευταία ενημέρωση:
- στις 05.02.2026
Περιγραφή
A refurbished and fully functional profile extrusion line for rigid PVC profiles (500 x 100 mm), consisting of:
Twin-Screw Extruder, parallel design
Manufacturer: Hans Weber Maschinenfabrik
Type: DS 85
Year of manufacture: 1979/2022
Machine no.: 85-399
Screw geometry: for rigid PVC powder
Screw diameter: 2 x 85 mm
Bjdpsyhckajfx Adaswh
Screw length: 17 x D
Screw speed: max. approx. 30 rpm
Screw torque: 10,000 Nm
Motor power: 3.8 - 23.0 kW
Drive motor: Commutator Motor Elektra Faurndau
Barrel heating/cooling zones: 4/2 (air cooling with fan)
Tool heating zones: 8
Temperature controllers: 12 x digital controllers PMA, type KS40
Connected load: approx. 60 kW (without tooling)
Extrusion height: 1100 mm
Output rate: approx. 150 - 180 kg/h for rigid PVC profiles
Special accessories: melt pressure sensor and melt temperature sensor
Accessories: material hopper and connecting flange
Accessories: vacuum pump (1.1 kW) with material separator
Dimensions: 4500 x 1200 x 2100 mm (LxWxH), including material hopper
Weight: approx. 4000 kg
Note: The electrical control cabinet was newly installed in 2022. Since then, the extruder has only run 216 hours.
Condition: refurbished and function-tested
Vacuum Calibration Unit
Manufacturer: Blake Kunststoffproduktionsanlagen
Type: 203-3-4.0
Year of manufacture: 1997
Total length: 5600 mm
Profile width: max. approx. 500 mm
Vacuum pumps: 3 units (each 5.5 kW)
Longitudinal adjustment: electric motor drive
Height/cross adjustment: front and rear via threaded spindle and handwheel
Stainless steel tank: Inside width: 450 mm, Outside width: 700 mm
Length: 4500 mm
Total connected load: approx. 20 kW
Dimensions: 5600 x 1200 x 2300 mm (LxWxH)
Weight: approx. 3000 kg
Condition: refurbished and function-tested
Caterpillar Haul-off
Manufacturer: Blake Kunststoffproduktionsanlagen
Type: 303-1600-270
Year of manufacture: 1997
Pad width: 300 mm
Passage width: max. 500 mm
Passage height: 100 mm
Effective contact length: 2400 mm
Haul-off speed: max. 8.0 m/min
Pulling force: approx. 40,000 N
Drive motor: DS motor, 7.5 kW
Motor control: frequency inverter
Caterpillar clamping: pneumatic, front and rear
Extrusion height: 1000 – 1200 mm
Dimensions: 4000 x 1200 x 2300 mm (LxWxH)
Weight: approx. 3000 kg
Condition: refurbished and function-tested
Note:
We also offer the vacuum calibration unit including the caterpillar haul-off separately for sale.
Η διαφήμιση μεταφράστηκε αυτόματα και ενδέχεται να περιέχει ορισμένα σφάλματα μετάφρασης.
Twin-Screw Extruder, parallel design
Manufacturer: Hans Weber Maschinenfabrik
Type: DS 85
Year of manufacture: 1979/2022
Machine no.: 85-399
Screw geometry: for rigid PVC powder
Screw diameter: 2 x 85 mm
Bjdpsyhckajfx Adaswh
Screw length: 17 x D
Screw speed: max. approx. 30 rpm
Screw torque: 10,000 Nm
Motor power: 3.8 - 23.0 kW
Drive motor: Commutator Motor Elektra Faurndau
Barrel heating/cooling zones: 4/2 (air cooling with fan)
Tool heating zones: 8
Temperature controllers: 12 x digital controllers PMA, type KS40
Connected load: approx. 60 kW (without tooling)
Extrusion height: 1100 mm
Output rate: approx. 150 - 180 kg/h for rigid PVC profiles
Special accessories: melt pressure sensor and melt temperature sensor
Accessories: material hopper and connecting flange
Accessories: vacuum pump (1.1 kW) with material separator
Dimensions: 4500 x 1200 x 2100 mm (LxWxH), including material hopper
Weight: approx. 4000 kg
Note: The electrical control cabinet was newly installed in 2022. Since then, the extruder has only run 216 hours.
Condition: refurbished and function-tested
Vacuum Calibration Unit
Manufacturer: Blake Kunststoffproduktionsanlagen
Type: 203-3-4.0
Year of manufacture: 1997
Total length: 5600 mm
Profile width: max. approx. 500 mm
Vacuum pumps: 3 units (each 5.5 kW)
Longitudinal adjustment: electric motor drive
Height/cross adjustment: front and rear via threaded spindle and handwheel
Stainless steel tank: Inside width: 450 mm, Outside width: 700 mm
Length: 4500 mm
Total connected load: approx. 20 kW
Dimensions: 5600 x 1200 x 2300 mm (LxWxH)
Weight: approx. 3000 kg
Condition: refurbished and function-tested
Caterpillar Haul-off
Manufacturer: Blake Kunststoffproduktionsanlagen
Type: 303-1600-270
Year of manufacture: 1997
Pad width: 300 mm
Passage width: max. 500 mm
Passage height: 100 mm
Effective contact length: 2400 mm
Haul-off speed: max. 8.0 m/min
Pulling force: approx. 40,000 N
Drive motor: DS motor, 7.5 kW
Motor control: frequency inverter
Caterpillar clamping: pneumatic, front and rear
Extrusion height: 1000 – 1200 mm
Dimensions: 4000 x 1200 x 2300 mm (LxWxH)
Weight: approx. 3000 kg
Condition: refurbished and function-tested
Note:
We also offer the vacuum calibration unit including the caterpillar haul-off separately for sale.
Η διαφήμιση μεταφράστηκε αυτόματα και ενδέχεται να περιέχει ορισμένα σφάλματα μετάφρασης.
Προμηθευτής
Σημείωση: Εγγραφείτε δωρεάν ή συνδεθείτε, για να αποκτήσετε πρόσβαση σε όλες τις πληροφορίες.
Υποβολή αιτήματος
Τηλέφωνο & Φαξ
+49 2871 ... αγγελίες
Η αγγελία σας διαγράφηκε με επιτυχία
Παρουσιάστηκε σφάλμα








































