Μηχανή συσκευασίας για ηλεκτρονικό εμπόριο

BVM Brunner COMTEX 4G

Side-sealing machine
- Manufacturer: BVM Brunner GmbH & Co. KG
- Machine type: Comtex 4G
- Machine No.: 20170259471
- Year of manufacture: 2017
- BVM Order No.: 5947
- Voltage, frequency: 3N 400V, 50Hz
- Power rating: P=18KW, I=26A, F=32AT
- Condition: fully refurbished with warranty

Comtex 4G Shipping:
The BVM shipping system "Comtex 4G Shipping" is a complete system for bag shipping of various items directly to the end customer, including address labeling. Delivery note, invoice, and goods are packed in a tightly fitting PE film pouch, labeled with the address, and handed over directly to the respective logistics partner.

Technical data:
Dkodpfx Acjw Ryt Deusu
- Sealing width: 750 mm transverse, 800 mm longitudinal
- Product height: up to 250 mm
- Output: up to 25 cycles/min*

(Special) equipment:
- Special paintwork
- Signal control light, 3 colors to indicate error messages
- Pre-accumulation plate, pneumatically operated, and presence control for the film waste tray, allowing the film tray to be changed during automatic operation (machine does not need to be stopped). Note: In this position, the working height of the Comtex is limited to 850 +/- 10 mm.
- Electronically controlled sealing bar drive (servo operation: infinitely variable speed adjustment).
- Film end detection via ultrasonic sensor, including analog input card (1 per film carrier)
- Mechanical distribution device for film scrap strips in conjunction with a large film scrap storage
- Number labeling of individual wires in the control cabinet of the packaging machine for Comtex 3G and Comtex 4G
- Grooves in the aluminum profile covered with plastic profile
- Bypass conveyor as a folding belt in the Comtex after the side sealing station for transferring products out of the machine.
- Film folding device without separate control for converting flat film into centrally folded film
- Film sealing device for flat films
- PN / PN coupler (Profinet coupler) for establishing a Profinet connection
- Software development for the PN / PN coupling, consisting of release connection, interlock, and combined fault message
- Film end detection at the film supply and film level detection at the film winding, detection via photoelectric sensors, including 3-color signal lamp and acoustic signal
- Mounting preparation for label applicators, suitable models on request, mounted at infeed, including electrical and pneumatic connections
- Sealing bar for creating a wide seal seam with separate cold knife cut, suitable for Comtex 3G, 4G, and Compacta with EGS
- Manual labeling device with linear motion (Model: Caljan Type: FPS BVM L113 L)
- Resealable film bags using double-sided adhesive tape inside, including tear-perforation wheel
- Additional tear-perforation wheel, allowing complete removal of the bag’s edge areas
- Free-standing control cabinet for Comtex with 5-meter cable
- Two sequentially mounted indexing belts (600 x 900 mm / 600 x 14,000 mm) for Comtex 4G (total length 14,950 mm) with recess for installing a scanner or camera, incl. trigger light curtain for scanner
- Height adjustment of the cross-sealing unit for passage height 220-250 mm
- Cognex scanner system, consisting of:
-- Scanner at the lower infeed for delivery notes
-- 2 overhead scanners
-- 1 overhead scanner for inspection
+++Fully refurbished unit with 12 months warranty according to our attached warranty conditions+++

Η διαφήμιση μεταφράστηκε αυτόματα και ενδέχεται να περιέχει ορισμένα σφάλματα μετάφρασης.