καλούπι

Casadei MATRIX 4+1

4-sided Planer Moulder, 4 Tool Holders + Universal Spindle, 2.5m Table & Reinforced Motors
Brand: CASADEI Model: MATRIX 4+1
Serial No.: 02-84-022 Year: 2002

WORKING CAPACITIES (thickness x width): 6 to 155 x 25 to 230 mm
- 4-sided planer and moulder
- Working width: 25 to 230 mm
Hnedpsu Sr Ivefx Aiwsr
- Working height (wood thickness): 6 to 155 mm
- Maximum finished wood section: 155 x 230 mm
- Minimum working length: 480 mm
- Maximum adjustable cutting depth: 10 mm
- Spindle speed: 6000 rpm
COMPOSITION OF THE MOULDER:
- Heavy-duty, welded steel frame
- Soundproof panoramic cover with gas struts
- Raised operator control panel
- Steel infeed table: 2500 x 250 mm
Height from floor: 880 mm
Spring-loaded side pressure infeed device
Manual table lubrication unit positioned after surfacing
1) Bottom horizontal spindle 5.5 kW
TERSA tool holder Ø 125 x h.240 mm
1 retractable vertical roller pressure unit
2 & 3) Right and left vertical spindles, 1 x 7.5 kW
TERSA tool holders Ø 125 x h.165 mm
4) Top horizontal spindle 7.5 kW
TERSA tool holder Ø 125 x h.240 mm
- Adjustable output pressure shoe
5) Universal spindle 7.5 kW
Ø 40 x 255 mm
1 retractable horizontal roller pressure unit
FEED SYSTEM:
- Feed with variable speed drive: 5 to 25 m/min
Feed motor: 1.1 kW (1.5 hp)
- 8 independent feed rollers with pneumatic pressure:
2+2 fluted steel, then 2+2 rubber-coated
OTHER FEATURES:
- CE compliance
- Main power supply: 380 V, 3-phase, 50 Hz
- Lockable switch, automatic star-delta starting
Emergency stop at front/rear
- Installed power: 37 kW (50 hp) IN 62A
- Braked motors
- Spindle drive by cardan shafts
- Digital indicators (Siko type counters) for precise manual setting of each operation
- Electric rise and fall of beam for thickness adjustment,
Lifting motor: 0.37 kW
- Axial spindle adjustment:
Lower horizontal: 0 to 15 mm
Upper horizontal: 0 to 25 mm
Verticals: 0 to 25 mm
- Acceptable tool dimensions:
Lower horizontal spindle: Ø 120 to 140 mm
For profiling on vertical spindles: Ø 100 to 180 mm
For profiling on upper horizontal spindle: Ø 100 to 180 mm
End-milling cutter: Ø140x12x40 mm
- Recommended air supply: 7 bar
Working pressure: 6 bar
Average consumption: 0.85 Nl/cycle
Connection: 1/2" G
- Extraction, centralized upper port: Ø 250 mm
Required air speed: minimum 25 m/sec Airflow: 4500 m3/h
- Includes technical manual.
- Machine equipped with 4 TERSA spindles
Footprint: 4700 x 1700 x h.1800 mm
Weight: 2240 kg
Please contact us for supply of consumables, accessories and/or extraction systems.

Η αγγελία μεταφράστηκε αυτόματα. Ενδέχεται να υπάρχουν σφάλματα μετάφρασης.