Engel victory 750/220 spex (2017) μόνο 6000 ώρες λειτουργίας

Engel victory 750/220 spex

ENGEL Victory 750/220 SPEX – Technical Specifications

Machine Designation: VICTORY 750/220 SPEX

Plasticizing Unit 1:

1. Screw diameter (standard): 45 mm
2. Available screw diameters: 40 / 45 / 50 / 55 mm
3. Screw stroke: 200 mm
4. Max. injection volume: 318 cm³
5. Screw rotation speed: 230 min⁻¹
6. Plasticizing rate (3-zone screw): 24.2 g/s
7. Plasticizing rate (barrier screw): 30.1 g/s

Injection Unit 1:

1. Injection rate: 229.0 cm³/s
2. Injection pressure (regenerative): 1,760 bar
3. Injection pressure (max): 2,360 bar

Nozzle 1:

1. Nozzle stroke: 350 mm
2. Nozzle contact force: 67.2 kN

Plasticizing Unit 1:

1. L/D ratio: 20.0
2. Heating zones incl. nozzle: 5
3. Heating power: 13.4 kWel

Clamping Unit:

1. Clamping force: 2,200 kN
2. Opening stroke + cylinder tolerance: 759 mm
3. Minimum mold height: 300 mm
4. Maximum platen distance: 1,050 mm
5. Platen dimensions horizontal × vertical: 880 × 830 mm
6. Discharge chute width: 650 mm
7. Max. mold weight, moving platen: 1,500 kg
8. Max. mold weight, fixed platen: 1,500 kg
9. Max. total mold weight: 3,000 kg
10. Dry cycle stroke: 250 mm
11. Dry cycle time: 2.00 s

Ejector:

1. Ejector stroke: 180 mm
2. Ejector force: 80.0 kN

Drive Unit:

1. Oil reservoir capacity – injection unit: 330 l
2. Oil tank capacity – clamping unit: 210 l

Oil Filter / Oil Cooler:

1. Standard cooling capacity (25 °C water inlet): 12.0 kW
2. Water consumption oil cooler 25 °C: 1.00 m³/h
3. Water consumption oil cooler 32 °C: 2.10 m³/h
Gedex Ely Topfx Acxjip

Basic Machine Data:

1. Overall weight (without oil): 12.2 t
2. Total connected load: 72.0 kW

1. Hydraulic drive type HV1 (standard)
2. CC300 microcomputer
3. 6-way flow regulator, 0–10 l/min

Η αγγελία μεταφράστηκε αυτόματα. Ενδέχεται να υπάρχουν σφάλματα μετάφρασης.