Τριπλής κατεύθυνσης ανατρεπόμενο ρυμουλκούμενοMÜLLER-MITTELTAL
Tandem-3-Seiten-Kipper KA-TA-R 11,9
Τριπλής κατεύθυνσης ανατρεπόμενο ρυμουλκούμενο
MÜLLER-MITTELTAL
Tandem-3-Seiten-Kipper KA-TA-R 11,9
σταθερή τιμή δεν συμπεριλαμβάνεται ΦΠΑ
26.900 €
Έτος κατασκευής
2023
Κατάσταση
Μεταχειρισμένο
Τοποθεσία
Wardenburg 

Προβολή φωτογραφιών
Εμφάνιση χάρτη
Στοιχεία για το μηχάνημα
- Περιγραφή μηχανήματος:
- Τριπλής κατεύθυνσης ανατρεπόμενο ρυμουλκούμενο
- Κατασκευαστής:
- MÜLLER-MITTELTAL
- Έτος κατασκευής:
- 2023
- Κατάσταση:
- μεταχειρισμένο
Τιμή & Τοποθεσία
σταθερή τιμή δεν συμπεριλαμβάνεται ΦΠΑ
26.900 €
- Τοποθεσία:
- Wardenburg, Germany
Κλήση
Τεχνικές λεπτομέρειες
- Συνολικό βάρος:
- 11.900 κιλ
- Μέγιστο βάρος φόρτωσης:
- 8.750 κιλ
- Διάταξη αξόνων:
- 2 άξονες
- Πρώτη ταξινόμηση:
- 06/2024
- Συνολικό πλάτος:
- 2.550 χιλ.
Λεπτομέρειες προσφοράς
- ID Καταχώρησης:
- A18512431
- Αριθμός Αναφοράς:
- MX06411
- Τελευταία ενημέρωση:
- στις 01.10.2025
Περιγραφή
Müller Mitteltal KA-TA-R 11.9 Tandem 3-way tipper with many extras. Gross vehicle weight: 11,900 kg Payload (approx.): 8,750 kg Internal dimensions: 5,000 x 2,420 x 500 mm Tyres: 385/55R19.5 Single-colour 4-coat paintwork Wheels: silver Chassis/side protection: hot-dip galvanized Flatbed with front wall: hot-dip galvanized Axles/springs/air reservoir etc.: black Side and rear walls: RAL 2011 deep orange Reinforced and certified body according to EN 12642 XL, including load securing certificate (only in combination with 500 mm high steel side walls). Rear posts bolted, hot-dip galvanized, without topcoat. Lashing points LC 5,000 daN recessed at front. Net hooks at the sides and rear integrated in the central locking mounts of the standard side wall and additionally 2 pieces on the front wall. BPW axles instead of GIANT. Tipping platform with fixed front wall in hot-dip galvanized design, bolted galvanized rear posts, without further coating (not with HARDOX floor). Due to the system, wave formation during hot-dip galvanization, especially on large surface floor plates, cannot be excluded and is not covered under warranty. Tyres 385/55R19.5 instead of 235/75R17.5 (floor and coupling height + approx. 110 mm, code 08.940 ramp length 3,570 mm required). 1 plastic toolbox, black, lockable, W=750 x H=350 x D=300 mm (45 kg load capacity with evenly distributed load), Fitted: on the right side of the chassis frame in the direction of travel. 1 pair of aluminium loading ramps without wheel track (8 t/pair), 3,570 x 400 x 105 mm, suitable for rubber-tyred and tracked vehicles, 55 kg each. Two-step access in front of the front wall, left-hand side in direction of travel (hot-dip galvanized). Connection cables extended for agricultural and forestry tractors.
Itsdevy Tvtepfx Aaaon
Further Information
New: No
Η διαφήμιση μεταφράστηκε αυτόματα και ενδέχεται να περιέχει ορισμένα σφάλματα μετάφρασης.
Itsdevy Tvtepfx Aaaon
Further Information
New: No
Η διαφήμιση μεταφράστηκε αυτόματα και ενδέχεται να περιέχει ορισμένα σφάλματα μετάφρασης.
Προμηθευτής
Σημείωση: Εγγραφείτε δωρεάν ή συνδεθείτε, για να αποκτήσετε πρόσβαση σε όλες τις πληροφορίες.
Εγγεγραμμένο μέλος από το: 2003
Υποβολή αιτήματος
Τηλέφωνο & Φαξ
+49 4407 ... αγγελίες
Η αγγελία σας διαγράφηκε με επιτυχία
Παρουσιάστηκε σφάλμα