τόρνος ακριβείας

Schaublin 180-CCN R-TM

TECHNICAL SPECIFICATIONS

Capacities:
Maximum turning diameter: 270 mm
Maximum diameter over cross slide: 160 mm
Height of center over cross slide: 83 mm
Maximum diameter over bed: 430 mm
Turning length (depending on equipment): 630 mm

Headstocks:
Standardized spindle nose, allowing use of different collets and chucks via adaptation accessories.
Collet accessories SCHAUBLIN: B45/F66
Maximum bar capacity diameter: 36 mm / 60 mm
Automatic chuck, standard diameter: 210 mm
Direct drive AC motor, power at 100% / 50% ED: 15 / 18.5 kW
Maximum torque at 100% / 50% ED: 135 / 165 Nm
Maximum spindle speed: 4,000 rpm
Spindle positioning, increment: 0.1°

C-Axis:
Programmable increment: 0.001°
Spindle locking torque: 80 Nm
Pneumatic clamping cylinder: 3,400 daN

Cross Slide:
Transverse travel, X axis: 230 mm
Resolution (radius): 0.0005 mm
AC motor drive, nominal torque: 3 Nm
Ball screw (diameter x pitch), X axis: 32 x 5 mm
Longitudinal travel, Z axis: 720 mm
Resolution: 0.001 mm
AC motor drive, nominal torque: 6 Nm
Ball screw (diameter x pitch), Z axis: 32 x 10 mm

Feeds:
Continuous feed rates, X/Z axes: 0–5,000 mm/min
Rapid traverse, X/Z axes: 8 / 10 m/min
Feed force, X/Z axes: 420 / 670 daN

Turret Tooling System:
Number of tool stations: 12
Number of live tool stations: 6
AC motor drive, intermittent power: 3.7 kW
Maximum intermittent torque: 36 Nm
Maximum drive speed: 5,000 rpm
Standardized tool holder mount: VDI 30
Dedpfxszb U Epo Adhjcn
Maximum tool shank size: 20 x 20 mm
Integrated coolant supply
Bi-directional indexing

Coolant System:
Tank capacity: 120 liters
Pump flow rate: 10 l/min
Pressure: 5 bar

Inventory 2230043 includes:

1 Fanuc 18i CNC
1 A2-6 spindle headstock
1 12-position VDI 30 turret for 6 live tools
1 pneumatically-controlled supporting tailstock 180-65.200
1 SCHUNK Rota-s 200-52 A2-6" 3-jaw chuck
1 CM5 rotating live center Brucker
1 ESX-25 radial drilling/milling head, max speed 5,000 rpm (no EX nut), ref 4100.00552
1 ESX-25 axial drilling/milling head, max speed 5,000 rpm (no EX nut), ref 4100.00550
1 KENNAMETAL ESX-25 (no EX nut)
1 EWS ESX-25 (no EX nut)
4 short left-handed radial toolholders, Form B2 ref 4100.0100
1 ESX-25 collet holder, Form E3 with EX25 nut and 5 mm collet
1 ditto, without EX25 nut
3 tapping collets Ø 4.5 / 6 / 8 mm
1 toolholder for indexable insert drills, Ø 40 mm bore, Form E1 ref 4100.00124
1 ditto Ø 32 mm bore, ref 4100.00107
1 ditto Ø 20 mm bore, ref 4100.00105
1 Ø 8 mm boring bar toolholder, Form E2 ref 4100.00108
1 ditto Ø 10, ref 4100.0109
1 ditto Ø 12, ref 4100.0110
2 ditto Ø 16, ref 4100.0111
1 ditto Ø 20, ref 4100.0112
1 ditto Ø 25, ref 4100.0113
1 ditto Ø 32, ref 4100.0115
1 Ø 32 GARANT long toolholder
5 steel protection caps, Form Z2 ref 4100.00130
1 left-hand axial toolholder, size C4 ref 4100.00103
1 pneumatically controlled supporting tailstock CM5 ref 180-65.200
1 stand only for microscope, ref 180-60.005
1 coolant system

OPTION

1 hinged steady rest with 3 jaws for Ø 30–120 mm ref 180-70.200 CHF 2,500.- + VAT

Except in case of error or omission, the technical information is provided without commitment

Η αγγελία μεταφράστηκε αυτόματα. Ενδέχεται να υπάρχουν σφάλματα μετάφρασης.