H Τύπος 500/175 Τον υδραυλική βαθιάς έλξης

CRONOSSTECH CHSP 500/175

CRONOSSTECH CHSP 500/175

H-Type Hydraulic Deep Drawing (Forming) Press – 8 Guides

General Description

The CRONOSSTECH CHSP series H-type hydraulic deep drawing presses are engineered with a double-acting operating principle to ensure controlled material flow in sheet metal forming, deep drawing, and forming applications. Thanks to its 8-guide H-frame structure, the press provides maximum rigidity throughout the pressing process, maintaining parallelism and perpendicularity tolerances consistently over long strokes.

The CHSP 500/175 model, featuring a 500-ton main ram and a 175-ton blankholder (pot) capacity, is designed to deliver complete control over the die and part during high-tonnage deep drawing and forming operations. The frame construction is stress-relieved by vibration to ensure long service life and reliability.

⚙️ Standard Equipment

- Steel construction, H-frame with 8 guides
- Vibration stress-relieved main frame
- Bronze Zr14 slide bearings
- WPQR and WPS welding procedures approved by TÜRK-AK accreditation (EN ISO 15614-1:2017 / EN ISO 14731)
- Design and manufacturing to CE standards
- PLC-controlled hydraulic system
- Touch panel display (DELTA 7”)
- Adjustable ram and pot stroke control
- Adjustable ram and pot tonnage (pressure) control
- Automatic lubrication system
- Electronic filter contamination warning
- Oil temperature and system status monitoring via display
- Cooling system
- Off-line filtration
- Safety systems for operator protection
- SIEMENS – SCHNEIDER switchgear components

📐 Technical Specifications – CHSP 500/175

Type: Steel construction, H-frame with 8 guides
Main Frame Material: St52 – ERDEMİR
Guide Bearings: Bronze Zr14
Capacity (Ram): 500 Ton
Capacity (Blankholder/Pot): 175 Ton
Moving Table Size: 1200 × 1500 mm
Fixed Table Size: 1200 × 1500 mm
Parallelism Tolerance: 120 micron/m
Lodpfx Afex N Uhus Iorh
Perpendicularity Tolerance: 60 micron/m
Stroke (Ram): 1000 mm
Stroke (Pot): 350 mm
Min. Daylight: 100 mm
Max. Daylight: 1100 mm
Stress Relief: Vibration stress-relieved
Welding Applications: WPQR and WPS certified by TÜRK-AK accreditation
EN ISO 15614-1/2017
(Welding applications are supervised by “welding coordination engineers” certified to EN ISO 14731)

Max. Operating Pressure: 250 Bar
Total Motor Power: 45 kW – IE3
Main Pump: 70 cm³ – REXROTH or PARKER
Moving Table Rapid Down Speed: 150 mm/s
Moving Table Drawing Speed: 12 mm/s
Moving Table Return Speed: 170 mm/s
Blankholder Forward Speed: 30 mm/s
Main Cylinder Inner Diameter: Ø500 mm – Ck45
Blankholder Cylinder Inner Diameter: Ø300 mm – Ck45
Auxiliary Acceleration Cylinders: 2 units
Approx. Press Height: 5800 mm
Approx. Press Width: 3250 mm
Approx. Press Depth: 2200 mm
Lower Table Height from Floor: 1400 mm
Pre-fill Valve: NG 150
Hydraulic Unit: REXROTH or PARKER
Cooling System: EMMEGI – CIESSE – PARKER
Off-line Filtration: REXROTH or PARKER
Linear Displacement Measurement: NOVATECHNIK or TURCK
PLC System: DELTA
Touch Panel Display: DELTA 7”
Switchgear Components: SIEMENS – SCHNEIDER
Approximate Weight: 26 Ton

Production Note

This machine is manufactured by CRONOSSTECH in Turkey.

Η διαφήμιση μεταφράστηκε αυτόματα και ενδέχεται να περιέχει ορισμένα σφάλματα μετάφρασης.