Μεταχειρισμένο Στυλ προς πώληση (1.430)

Κατάσταση: καινούργιο, Έτος κατασκευής: 2025, δύναμη συμπίεσης: 2.000 t, πλάτος τραπεζιού: 1.500 χιλ., μήκος τραπεζιού: 2.500 χιλ., δύναμη επαναφοράς: 600 t, διαδρομή: 1.000 χιλ., λειτουργική πίεση: 250 δοκός, Εξοπλισμός: τεκμηρίωση / εγχειρίδιο, φωτοηλεκτρικός φράκτης ασφαλείας, CRONOSSTECH CHSP 2000/600 H-Type Hydraulic Deep Drawing (Forming) Press – 8-Guided Slides General Description The CRONOSSTECH CHSP series H-type hydraulic forming presses have been developed for heavy deep drawing applications that require very high tonnage, large table dimensions, and controlled blank holder pressure. Thanks to the 8-guided slide H-frame body design, the press ensures high rigidity throughout the pressing operation; parallelism and perpendicularity tolerances are stably maintained during long-stroke movement. The CHSP 2000/600 model offers high control and repeatability in the processing of large-size dies and during deep drawing and forming operations, with a main ram capacity of 2000 tons and blank holder capacity of 600 tons. The steel welded frame is stress-relieved by vibration, designed for long life and reliable operation under heavy industrial conditions. ⚙️ Standard Equipment • Steel construction, H-frame body with 8-slides • Stress-relieved body structure via vibration • Bronze Zr14 slideway bearings • WPQR and WPS approved welds with TURK-AK accreditation (EN ISO 15614-1:2017 / EN ISO 14731) • PLC-controlled hydraulic system • Touchscreen panel (DELTA 7”) • Adjustable ram and blank holder stroke control • Adjustable ram and blank holder tonnage (pressure) control • Automatic lubrication system • Electronically monitored filter contamination warning • Hydraulic unit oil temperature and system status monitoring on the display • Off-line filtration and industrial cooling system • SIEMENS – SCHNEIDER switchgear components • Industrial safety systems for operator protection Gjdpfex N Ukvsx Aatett 📐 Technical Specifications – CHSP 2000/600 Type: Steel construction, H-frame body with 8-slides Frame Material: St52 – ERDEMİR Slideway Bearings: Bronze Zr14 Capacity (Ram / Blank Holder): 2000 / 600 Tons Moving / Fixed Table: 1500 × 2500 mm Parallelism / Perpendicularity: 120 / 60 micron/mtr. Stroke (Ram / Blank Holder): 1000 / 350 mm Daylight Opening (Min / Max): 200 / 1200 mm Max. Working Pressure: 250 Bar Total Motor Power: 180 kW – IE3 Main Pump: 140 cm³ – REXROTH or PARKER Main Cylinder: Ø720 mm – Ck45 (2 units) Blank Holder Cylinder: Ø390 mm – Ck45 (2 units) Pre-fill Valve: NG 200 PLC / Panel: DELTA / DELTA 7” Approximate Weight: 105 Tons Production Note This machine is manufactured by CRONOSSTECH in Turkey.

Κατάσταση: καινούργιο, Έτος κατασκευής: 2025, δύναμη συμπίεσης: 1.500 t, πλάτος τραπεζιού: 1.500 χιλ., μήκος τραπεζιού: 2.400 χιλ., δύναμη επαναφοράς: 500 t, διαδρομή: 1.000 χιλ., λειτουργική πίεση: 250 δοκός, Εξοπλισμός: τεκμηρίωση / εγχειρίδιο, φωτοηλεκτρικός φράκτης ασφαλείας, CRONOSSTECH CHSP 1500/500 H-Type Hydraulic Deep Drawing (Stamping) Press – 8-Guided Slides General Description The CRONOSSTECH CHSP series H-type hydraulic deep drawing presses are designed to provide maximum frame rigidity, precise parallelism, and long service life for deep drawing applications requiring very high tonnage and large table dimensions. Thanks to its 8-guided H-frame body structure, the press ram and table movements remain controlled and stable throughout the pressing process. The CHSP 1500/500 model, featuring a 1500-ton main ram and a 500-ton blank holder capacity, is specifically engineered for large-sized tooling, deep drawing, and precision-controlled forming operations. Its stress-relieved, welded-steel construction offers high strength and reliability under heavy industrial conditions. ⚙️ Standard Equipment • Welded steel, 8-slide H-frame body structure • Stress-relieved frame by vibration • Bronze Zr14 slide bushings • WPQR and WPS certified welding by TÜRK-AK accredited bodies (EN ISO 15614-1:2017 / EN ISO 14731) • PLC-controlled hydraulic system • 7” DELTA touch panel screen • Adjustable ram and blank holder stroke control • Adjustable ram and blank holder tonnage (pressure) control • Automatic lubrication system • Electronically monitored filter contamination alert Gtsdox N Ukijpfx Aatjt • On-screen monitoring of hydraulic unit oil temperature and system status • Off-line filtration and industrial cooling system • SIEMENS – SCHNEIDER electrical components • Industrial-grade safety systems for operator protection 📐 Technical Specifications – CHSP 1500/500 Type: Welded steel construction, 8-slide H-frame body Frame Material: St52 – ERDEMİR Guide Bushings: Bronze Zr14 Capacity (Ram / Blank Holder): 1500 / 500 Ton Moving / Fixed Table Size: 1500 × 2400 mm Parallelism / Perpendicularity Accuracy: 120 / 60 micron/m Stroke (Ram / Blank Holder): 1000 / 350 mm Daylight Opening (Min / Max): 200 / 1200 mm Max. Working Pressure: 250 Bar Total Motor Power: 90 kW – IE3 Main Pump: 101 cm³ – REXROTH or PARKER Main Cylinder: Ø620 mm – Ck45 (2 units) Blank Holder Cylinder: Ø360 mm – Ck45 (2 units) Pre-fill Valve: NG 200 PLC / Control Panel: DELTA / DELTA 7” Approximate Weight: 87 Tons Production Note This machine is manufactured by CRONOSSTECH in Turkey.

Κατάσταση: καινούργιο, Έτος κατασκευής: 2025, δύναμη συμπίεσης: 1.200 t, πλάτος τραπεζιού: 1.500 χιλ., μήκος τραπεζιού: 2.000 χιλ., δύναμη επαναφοράς: 400 t, διαδρομή: 1.000 χιλ., λειτουργική πίεση: 250 δοκός, Εξοπλισμός: τεκμηρίωση / εγχειρίδιο, φωτοηλεκτρικός φράκτης ασφαλείας, CRONOSSTECH CHSP 1200/400 H-Type Hydraulic Deep Drawing (Forming) Press – 8-Gibbed General Description The CRONOSSTECH CHSP series H-type hydraulic forming and deep drawing presses are designed to provide maximum rigidity, precision, and process control in sheet metal forming applications that require high tonnage. The 8-gibbed H-frame body structure ensures stable parallelism and perpendicularity tolerances even with large table dimensions. The CHSP 1200/400 model, featuring a 1200-ton main ram and a 400-ton blank holder capacity, is intended for heavy industrial applications requiring deep drawing, forming, and controlled material flow. Its vibration stress-relieved welded steel construction delivers long-lasting and reliable performance. ⚙️ Standard Equipment • Welded steel construction, 8-gibbed H-frame body • Vibration stress-relieved frame structure • Bronze Zr14 gib guiding • WPQR and WPS certified welding by TURKAK accredited institutions (EN ISO 15614-1:2017 / EN ISO 14731) • PLC controlled hydraulic system • 7" DELTA touchscreen control panel • Adjustable ram and blank holder stroke control • Adjustable ram and blank holder tonnage (pressure) control • Automatic lubrication system • Electronically monitored filter contamination warning • Monitoring of hydraulic oil temperature and system status on screen • Off-line filtration and industrial cooling system • SIEMENS – SCHNEIDER electrical components • Industrial safety equipment for operator protection 📐 Technical Specifications – CHSP 1200/400 Type: Welded steel construction, 8-gibbed H-frame body Gtsdjx N Uiropfx Aatot Frame Material: St52 – ERDEMIR Gib Guiding: Bronze Zr14 Capacity (Ram): 1200 Tons Capacity (Blank Holder): 400 Tons Moving / Fixed Table Size: 1500 × 2000 mm Parallelism / Perpendicularity: 120 / 60 microns/meter Stroke (Ram / Blank Holder): 1000 / 350 mm Daylight Opening (Min / Max): 100 / 1100 mm Max. Working Pressure: 250 Bar Total Motor Power: 75 kW – IE3 Main Pump: 70 cm³ – REXROTH or PARKER Main Cylinder: Ø560 mm – Ck45 (2 units) Blank Holder Cylinder: Ø450 mm – Ck45 Pre-fill Valve: NG 200 PLC / Panel: DELTA / DELTA 7” Approximate Weight: 75 Tons Production Note This machine is manufactured by CRONOSSTECH in Turkey.

Κατάσταση: καινούργιο, Έτος κατασκευής: 2025, δύναμη συμπίεσης: 1.000 t, πλάτος τραπεζιού: 1.500 χιλ., μήκος τραπεζιού: 2.000 χιλ., δύναμη επαναφοράς: 350 t, διαδρομή: 1.000 χιλ., λειτουργική πίεση: 250 δοκός, Εξοπλισμός: τεκμηρίωση / εγχειρίδιο, φωτοηλεκτρικός φράκτης ασφαλείας, CRONOSSTECH CHSP 1000/350 H-Type Hydraulic Deep Drawing (Spinning) Press – 8 Gib Guides General Description The CRONOSSTECH CHSP series H-type hydraulic deep drawing presses are engineered with a double-acting (ram + blank holder) system architecture for high-tonnage sheet metal forming, deep drawing, and spinning applications. The 8-gib H-frame structure provides high rigidity during pressing operations, ensuring stable parallelism and perpendicularity tolerances even with large bed dimensions. The CHSP 1000/350 model, with a main ram capacity of 1000 tons and blank holder capacity of 350 tons, is specifically designed for deep drawing processes in automotive, white goods, defense, and heavy industry applications requiring controlled material flow. The steel construction frame, stress-relieved by vibration, ensures long-lasting and reliable operation. ⚙️ Standard Equipment • Steel construction, 8-gib H-frame press body Gtedpsx N Uilefx Aatjt • Vibration-stress relieved frame structure • Bronze Zr14 gib slides • WPQR and WPS certified welding procedures with TÜRK-AK accreditation (EN ISO 15614-1:2017 / EN ISO 14731) • PLC-controlled hydraulic system • Touchscreen operator panel (DELTA 7”) • Adjustable ram and blank holder stroke control • Adjustable ram and blank holder tonnage (pressure) control • Automatic lubrication system • Electronic filter contamination warning • On-screen monitoring of hydraulic unit oil temperature and system status • Off-line filtration and cooling system • SIEMENS – SCHNEIDER switchgear components • Safety systems for operator protection 📐 Technical Specifications – CHSP 1000/350 Type: Steel construction, 8-gib H-frame press body Frame Material: St52 – ERDEMİR Gib Slides: Bronze Zr14 Capacity (Ram): 1000 Ton Capacity (Blank Holder): 350 Ton Moving / Fixed Table: 1500 × 2000 mm Parallelism / Perpendicularity: 120 / 60 micron/meter Stroke (Ram / Blank Holder): 1000 / 350 mm Daylight Opening (Min / Max): 100 / 1100 mm Max. Operating Pressure: 250 Bar Total Motor Power: 75 kW – IE3 Main Pump: 70 cm³ – REXROTH or PARKER Main Cylinder: Ø500 mm – Ck45 (2 units) Blank Holder Cylinder: Ø370 mm – Ck45 Pre-fill Valve: NG 200 PLC / Operator Panel: DELTA / DELTA 7” Approximate Weight: 65 Tons Production Note This machine is manufactured by CRONOSSTECH in Turkey.

Κατάσταση: καινούργιο, Έτος κατασκευής: 2025, δύναμη συμπίεσης: 800 t, πλάτος τραπεζιού: 1.500 χιλ., μήκος τραπεζιού: 2.000 χιλ., δύναμη επαναφοράς: 270 t, διαδρομή: 1.000 χιλ., λειτουργική πίεση: 250 δοκός, Εξοπλισμός: τεκμηρίωση / εγχειρίδιο, φωτοηλεκτρικός φράκτης ασφαλείας, CRONOSSTECH CHSP 800/270 H-Type Hydraulic Deep Drawing (Spinning) Press – 8 Gib Guided General Description The CRONOSSTECH CHSP series H-type hydraulic deep drawing presses are designed with a double-acting (ram + die cushion) working principle for high-tonnage sheet metal forming, deep drawing, and spinning applications. The 8-gib H-frame structure ensures high rigidity, stable parallelism, and long die life even for large table sizes during pressing. The CHSP 800/270 model, with its 800-ton main ram and 270-ton die cushion capacity, is specifically developed for processes demanding controlled material flow, particularly in automotive, white goods, defense, and heavy sheet metal forming industries. The steel construction frame, stress-relieved by vibration, provides long-lasting and reliable performance. ⚙️ Standard Equipment • Steel construction, 8-gib H-frame press body • Stress-relieved frame structure via vibration • Bronze Zr14 gib liners • Welding applications with WPQR and WPS approvals certified by TÜRK-AK (EN ISO 15614-1:2017 / EN ISO 14731) • PLC-controlled hydraulic system • Touch panel display (DELTA 7”) • Adjustable ram and die cushion stroke control • Adjustable ram and die cushion tonnage (pressure) control • Automatic lubrication system • Electronic filter contamination warning • On-screen monitoring of hydraulic oil temperature and system status • Off-line filtration and cooling unit • SIEMENS – SCHNEIDER electrical components • Safety systems for operator protection 📐 Technical Specifications – CHSP 800/270 Type: Steel construction, 8-gib H-frame press body Frame Material: St52 – ERDEMİR Gib Liners: Bronze Zr14 Capacity (Ram): 800 Ton Capacity (Die Cushion): 270 Ton Moving Table Size: 1500 × 2000 mm Fixed Table Size: 1500 × 2000 mm Parallelism Tolerance: 120 micron/m Perpendicularity Tolerance: 60 micron/m Stroke (Ram): 1000 mm Stroke (Die Cushion): 350 mm Min. / Max. Daylight: 100 / 1100 mm Max. Working Pressure: 250 Bar Total Motor Power: 75 kW – IE3 Main Pump: 70 cm³ – REXROTH or PARKER Gtjdex N Uh Uepfx Aatet Main Cylinder: Ø390 mm – Ck45 (2 units) Die Cushion Cylinder: Ø370 mm – Ck45 Pre-Fill Valve: NG 200 PLC: DELTA Touch Panel: DELTA 7” Approximate Weight: 54 Tons Production Note This machine is manufactured by CRONOSSTECH in Turkey.

Κατάσταση: καινούργιο, Έτος κατασκευής: 2025, δύναμη συμπίεσης: 600 t, πλάτος τραπεζιού: 1.200 χιλ., μήκος τραπεζιού: 1.500 χιλ., δύναμη επαναφοράς: 200 t, διαδρομή: 1.000 χιλ., λειτουργική πίεση: 250 δοκός, Εξοπλισμός: τεκμηρίωση / εγχειρίδιο, φωτοηλεκτρικός φράκτης ασφαλείας, CRONOSSTECH CHSP 600/200 H-Type Hydraulic Deep Drawing (Forming) Press – 8-Guideways Gtjdpfx Aaox N Uhzotst General Description The CRONOSSTECH CHSP series H-type hydraulic deep drawing presses are developed with a double-acting working principle to ensure controlled material flow in sheet metal forming, deep drawing, and forming applications. The 8-guideway H-frame structure provides maximum rigidity during pressing, maintaining stable parallelism and perpendicularity tolerances throughout the entire stroke length. The CHSP 600/200 model, featuring a 600-ton main ram and 200-ton bottom cushion (pot) capacity, is engineered to deliver precise control over the die and formed part during high-tonnage deep drawing and forming operations. The frame construction is stress-relieved by vibration to guarantee long-lasting and reliable operation. ⚙️ Standard Equipment - Steel construction, 8-guideway H-frame press body - Frame is stress-relieved by vibration - Bronze Zr14 guideway bushings - WPQR and WPS certified welding procedures accredited by TÜRK-AK (EN ISO 15614-1:2017 / EN ISO 14731) - Design and manufacturing in accordance with CE standards - PLC-controlled hydraulic system - 7” DELTA touchscreen panel - Adjustable ram and cushion (pot) stroke control - Adjustable ram and cushion (pot) tonnage (pressure) control - Automatic lubrication system - Electronic filter contamination warning - Hydraulic unit oil temperature and system status display on the screen - Cooling system - Off-line filtration - Safety systems for operator protection - SIEMENS – SCHNEIDER switchgear components 📐 Technical Specifications – CHSP 600/200 - Type: Steel construction, 8-guideway H-frame press body - Frame Material: St52 – ERDEMİR - Guideway Bushings: Bronze Zr14 - Capacity (Ram): 600 Ton - Capacity (Pot): 200 Ton - Moving Table Size: 1200 × 1500 mm - Fixed Table Size: 1200 × 1500 mm - Parallelism Tolerance: 120 micron/m - Perpendicularity Tolerance: 60 micron/m - Stroke (Ram): 1000 mm - Stroke (Pot): 350 mm - Min. Daylight: 100 mm - Max. Daylight: 1100 mm - Weld Stress Relief: By vibration - Welding Procedure: WPQR and WPS certified by TÜRK-AK EN ISO 15614-1/2017 (Welding procedures are supervised by “welding coordination engineers” certified to EN ISO 14731) - Max. Working Pressure: 250 Bar - Total Motor Power: 55 kW – IE3 - Main Pump: 70 cm³ – REXROTH or PARKER - Moving Table Fast Approach Speed: 150 mm/sec - Moving Table Drawing Speed: 12 mm/sec - Moving Table Return Speed: 170 mm/sec - Cushion Table Forward Speed: 30 mm/sec - Main Cylinder Inner Diameter: Ø550 mm – Ck45 - Cushion Cylinder Inner Diameter: Ø320 mm – Ck45 - Auxiliary Acceleration Cylinders: 2 units - Approx. Press Height: 5900 mm - Approx. Press Width: 3250 mm - Approx. Press Depth: 2300 mm - Bottom Table Height from Floor: 1400 mm - Pre-fill Valve: NG 150 - Hydraulic Unit: REXROTH or PARKER - Cooling System: EMMEGI – CIESSE – PARKER - Off-line Filtration: REXROTH or PARKER - Linear Position Transducer: NOVATECHNIK or TURCK - PLC System: DELTA - Touchscreen Panel: DELTA 7” - Switchgear Components: SIEMENS – SCHNEIDER - Approx. Weight: 35 Tons Production Note This machine is manufactured by CRONOSSTECH in Turkey.

Κατάσταση: καινούργιο, Έτος κατασκευής: 2025, δύναμη συμπίεσης: 500 t, πλάτος τραπεζιού: 1.200 χιλ., μήκος τραπεζιού: 1.500 χιλ., δύναμη επαναφοράς: 175 t, διαδρομή: 1.000 χιλ., λειτουργική πίεση: 250 δοκός, Εξοπλισμός: τεκμηρίωση / εγχειρίδιο, φωτοηλεκτρικός φράκτης ασφαλείας, CRONOSSTECH CHSP 500/175 H-Type Hydraulic Deep Drawing (Forming) Press – 8 Guides General Description The CRONOSSTECH CHSP series H-type hydraulic deep drawing presses are engineered with a double-acting operating principle to ensure controlled material flow in sheet metal forming, deep drawing, and forming applications. Thanks to its 8-guide H-frame structure, the press provides maximum rigidity throughout the pressing process, maintaining parallelism and perpendicularity tolerances consistently over long strokes. The CHSP 500/175 model, featuring a 500-ton main ram and a 175-ton blankholder (pot) capacity, is designed to deliver complete control over the die and part during high-tonnage deep drawing and forming operations. The frame construction is stress-relieved by vibration to ensure long service life and reliability. ⚙️ Standard Equipment - Steel construction, H-frame with 8 guides - Vibration stress-relieved main frame - Bronze Zr14 slide bearings - WPQR and WPS welding procedures approved by TÜRK-AK accreditation (EN ISO 15614-1:2017 / EN ISO 14731) - Design and manufacturing to CE standards - PLC-controlled hydraulic system - Touch panel display (DELTA 7”) - Adjustable ram and pot stroke control - Adjustable ram and pot tonnage (pressure) control - Automatic lubrication system - Electronic filter contamination warning - Oil temperature and system status monitoring via display - Cooling system - Off-line filtration - Safety systems for operator protection - SIEMENS – SCHNEIDER switchgear components 📐 Technical Specifications – CHSP 500/175 Type: Steel construction, H-frame with 8 guides Main Frame Material: St52 – ERDEMİR Guide Bearings: Bronze Zr14 Capacity (Ram): 500 Ton Capacity (Blankholder/Pot): 175 Ton Moving Table Size: 1200 × 1500 mm Fixed Table Size: 1200 × 1500 mm Parallelism Tolerance: 120 micron/m Perpendicularity Tolerance: 60 micron/m Stroke (Ram): 1000 mm Stroke (Pot): 350 mm Min. Daylight: 100 mm Max. Daylight: 1100 mm Stress Relief: Vibration stress-relieved Welding Applications: WPQR and WPS certified by TÜRK-AK accreditation EN ISO 15614-1/2017 (Welding applications are supervised by “welding coordination engineers” certified to EN ISO 14731) Max. Operating Pressure: 250 Bar Total Motor Power: 45 kW – IE3 Main Pump: 70 cm³ – REXROTH or PARKER Moving Table Rapid Down Speed: 150 mm/s Moving Table Drawing Speed: 12 mm/s Moving Table Return Speed: 170 mm/s Blankholder Forward Speed: 30 mm/s Main Cylinder Inner Diameter: Ø500 mm – Ck45 Blankholder Cylinder Inner Diameter: Ø300 mm – Ck45 Auxiliary Acceleration Cylinders: 2 units Approx. Press Height: 5800 mm Approx. Press Width: 3250 mm Approx. Press Depth: 2200 mm Lower Table Height from Floor: 1400 mm Pre-fill Valve: NG 150 Hydraulic Unit: REXROTH or PARKER Cooling System: EMMEGI – CIESSE – PARKER Off-line Filtration: REXROTH or PARKER Linear Displacement Measurement: NOVATECHNIK or TURCK Gtedpfsx N Uhusx Aatst PLC System: DELTA Touch Panel Display: DELTA 7” Switchgear Components: SIEMENS – SCHNEIDER Approximate Weight: 26 Ton Production Note This machine is manufactured by CRONOSSTECH in Turkey.

Κατάσταση: καινούργιο, Έτος κατασκευής: 2025, δύναμη συμπίεσης: 400 t, πλάτος τραπεζιού: 1.200 χιλ., μήκος τραπεζιού: 1.500 χιλ., δύναμη επαναφοράς: 150 t, διαδρομή: 1.000 χιλ., λειτουργική πίεση: 250 δοκός, Εξοπλισμός: τεκμηρίωση / εγχειρίδιο, φωτοηλεκτρικός φράκτης ασφαλείας, CRONOSSTECH CHSP 400/150 H-Type Hydraulic Deep Drawing (Spinning) Press – 8-Guided General Description The CRONOSSTECH CHSP series H-type hydraulic deep drawing presses are developed with a double-acting principle to ensure controlled material flow in sheet metal forming, deep drawing, and spinning applications. With its 8-guided H-frame structure, the machine provides maximum rigidity during pressing; parallelism and perpendicularity tolerances are stably maintained throughout the long stroke. The CHSP 400/150 model is designed for high-tonnage deep drawing and spinning operations, offering 400-ton main ram and 150-ton cushion capacities. The frame construction is stress-relieved by vibration to ensure long-term durability and reliable performance. ⚙️ Standard Equipment • Steel construction, 8-guided H-frame press body • Stress-relieved frame structure via vibration • Bronze Zr14 slide bearings • WPQR and WPS certified welding applications, accredited by TÜRK-AK (EN ISO 15614-1:2017 / EN ISO 14731) • Design and manufacturing to CE standards • PLC-controlled hydraulic system • Touchscreen panel (DELTA 7”) • Adjustable ram and cushion stroke control • Adjustable ram and cushion tonnage (pressure) control • Automatic lubrication system • Electronically monitored filter contamination warning • Real-time display of hydraulic unit oil temperature and system status • Cooling system • Off-line filtration • Safety systems for operator protection • SIEMENS – SCHNEIDER electrical components 📐 Technical Specifications – CHSP 400/150 Type: Steel construction, 8-guided H-frame press body Frame Material: St52 – ERDEMİR Slide Bearings: Bronze Zr14 Main Ram Capacity: 400 Tons Cushion Capacity: 150 Tons Movable Table Dimensions: 1200 × 1500 mm Fixed Table Dimensions: 1200 × 1500 mm Parallelism Tolerance: 120 micron/meter Perpendicularity Tolerance: 60 micron/meter Ram Stroke: 1000 mm Cushion Stroke: 350 mm Min. Daylight: 100 mm Max. Daylight: 1100 mm Stress Relief: By vibration Welding Application: WPQR and WPS certified by TÜRK-AK EN ISO 15614-1/2017 (Welding applications are supervised by "welding coordination engineers" certified according to EN ISO 14731) Max. Working Pressure: 250 Bar Total Motor Power: 37 kW – IE3 Main Pump: 45 cm³ – REXROTH or PARKER Movable Table Fast Descent Speed: 150 mm/sec Movable Table Drawing Speed: 12 mm/sec Movable Table Return Speed: 170 mm/sec Cushion Forward Speed: 30 mm/sec Main Cylinder Bore: Ø450 mm – Ck45 Cushion Cylinder Bore: Ø280 mm – Ck45 Auxiliary Acceleration Cylinders: 2 units Approx. Height of Press: 5600 mm Approx. Width of Press: 3250 mm Approx. Depth of Press: 2200 mm Lower Table Height from Floor: 1400 mm Pre-fill Valve: NG 150 Hydraulic Unit: REXROTH or PARKER Cooling System: EMMEGI – CIESSE – PARKER Off-line Filtration: REXROTH or PARKER Linear Position Transducer: NOVATECHNIK or TURCK PLC: DELTA Touchscreen Panel: DELTA 7” Electrical Components: SIEMENS – SCHNEIDER Approx. Weight: 24 Tons Gjdpfjx N Uhhox Aatjtt Production Note This machine is manufactured in Turkey by CRONOSSTECH.

Κατάσταση: καινούργιο, Έτος κατασκευής: 2025, δύναμη συμπίεσης: 300 t, πλάτος τραπεζιού: 1.200 χιλ., μήκος τραπεζιού: 1.500 χιλ., δύναμη επαναφοράς: 100 t, διαδρομή: 800 χιλ., λειτουργική πίεση: 250 δοκός, Εξοπλισμός: τεκμηρίωση / εγχειρίδιο, φωτοηλεκτρικός φράκτης ασφαλείας, RONOSSTECH CHSP 300/100 H-Type Hydraulic Deep Drawing (Spinning) Press – 8-Guided General Description The CRONOSSTECH CHSP series H-type hydraulic deep drawing presses are engineered with a double-acting working principle to ensure controlled material flow in sheet metal forming, deep drawing, and spinning applications. The H-frame construction with 8 guides provides maximum rigidity during pressing operations, maintaining stable parallelism and perpendicularity tolerances throughout the extended stroke. The CHSP 300/100 model features a 300-ton main ram and a 100-ton lower cushion (blank holder), specifically designed for high-tonnage deep drawing and spinning operations. The frame structure is stress-relieved by vibration for long-lasting and reliable performance. ⚙️ Standard Equipment - Steel construction, 8-guided H-frame press design - Stress-relieved body structure by vibration - Bronze Zr14 slide bearings - WPQR and WPS certified welding by TÜRK-AK accreditation (EN ISO 15614-1:2017 / EN ISO 14731) - Design and manufacturing compliant with CE standards - PLC controlled hydraulic system - Touch panel display (DELTA 7”) - Adjustable ram and cushion stroke control - Adjustable ram and cushion tonnage (pressure) control - Automatic lubrication system - Electronic filter contamination warning - Hydraulic unit oil temperature and system status monitored on screen - Cooling system - Off-line filtration - Safety systems for operator protection - SIEMENS – SCHNEIDER electrical components 📐 Technical Specifications – CHSP 300/100 Type: Steel construction, 8-guided H-frame press Frame Material: St52 – ERDEMİR Slide Bearings: Bronze Zr14 Capacity (Ram): 300 Tons Capacity (Cushion): 100 Tons Moving Table Size: 1200 × 1500 mm Fixed Table Size: 1200 × 1500 mm Parallelism Tolerance: 120 micron/mt. Perpendicularity Tolerance: 60 micron/mt. Stroke (Ram): 800 mm Stroke (Cushion): 300 mm Min. Daylight: 100 mm Max. Daylight: 900 mm Stress Relief: Vibration stress relief Welding Application: WPQR and WPS certified by TÜRK-AK (EN ISO 15614-1/2017). Welding supervised by certified welding coordination engineers as per EN ISO 14731. Max. Working Pressure: 250 Bar Total Motor Power: 37 kW – IE3 Main Pump: 45 cm³ – REXROTH or PARKER Fast Descent Speed (Moving Table): 150 mm/s Spinning Speed (Moving Table): 12 mm/s Return Speed (Moving Table): 170 mm/s Cushion Speed (Forward): 30 mm/s Main Cylinder Bore: Ø390 mm – Ck45 Cushion Cylinder Bore: Ø230 mm – Ck45 Godpfxjx N Uhbe Aatett Auxiliary Acceleration Cylinders: 2 pcs Approx. Height: 4400 mm Approx. Width: 3250 mm Approx. Depth: 2200 mm Lower Table Height from Floor: 1350 mm Pre-fill Valve: NG 150 Hydraulic Unit: REXROTH or PARKER Cooling System: EMMEGI – CIESSE – PARKER Off-line Filtration: REXROTH or PARKER Linear Position Sensor: NOVATECHNIK or TURCK PLC: DELTA Touch Screen Display: DELTA 7” Switchgear: SIEMENS – SCHNEIDER Approx. Weight: 21 Tons Production Note This machine is manufactured in Turkey by CRONOSSTECH.

Κατάσταση: καινούργιο, Έτος κατασκευής: 2025, δύναμη συμπίεσης: 250 t, πλάτος τραπεζιού: 1.200 χιλ., μήκος τραπεζιού: 1.500 χιλ., δύναμη επαναφοράς: 80 t, διαδρομή: 800 χιλ., λειτουργική πίεση: 250 δοκός, Εξοπλισμός: τεκμηρίωση / εγχειρίδιο, φωτοηλεκτρικός φράκτης ασφαλείας, CRONOSSTECH CHSP 250/80 H-Type Hydraulic Deep Drawing (Spinning) Press – 8-Gib Design General Description The CRONOSSTECH CHSP series H-type hydraulic deep drawing presses are engineered with a double-acting operation principle to provide precise material flow control during sheet metal forming, deep drawing, and spinning applications. The H-frame structure with 8 gibs ensures maximum rigidity throughout the pressing cycle, maintaining parallelism and perpendicularity tolerances consistently along the stroke. The CHSP 250/80 model is designed for medium to high tonnage deep drawing and spinning operations, featuring a 250-ton main ram and an 80-ton cushion (blankholder) capacity. The frame construction is stress-relieved by vibration, offering durability and reliable long-term performance. ⚙️ Standard Equipment - Steel construction, 8-gib H-frame press body - Stress-relieved structure via vibration technique - Bronze Zr14 gib bushings - WPQR and WPS approved welding applications by TÜRK-AK accredited authorities (EN ISO 15614-1:2017 / EN ISO 14731) - Design and manufacturing in compliance with CE standards - PLC-controlled hydraulic system - 7" DELTA touch panel interface Gtodpfx Ajx N Uaqeatst - Adjustable ram and cushion stroke control - Adjustable ram and cushion tonnage (pressure) control - Automatic lubrication system - Electronic filter contamination warning - Real-time monitoring of hydraulic unit oil temperature and system status on screen - Cooling system - Off-line filtration - Safety systems for operator protection - SIEMENS – SCHNEIDER electrical equipment 📐 Technical Specifications – CHSP 250/80 Type: Steel construction, 8-gib H-frame press body Frame Material: St52 – ERDEMIR Gib Bushing: Bronze Zr14 Capacity (Ram): 250 Ton Capacity (Cushion): 80 Ton Moving Table Size: 1200 × 1500 mm Fixed Table Size: 1200 × 1500 mm Parallelism Tolerance: 120 micron/m Perpendicularity Tolerance: 60 micron/m Stroke (Ram): 800 mm Stroke (Cushion): 300 mm Min. Daylight: 100 mm Max. Daylight: 900 mm Stress Relief: Vibration stress-relieving Welding Applications: WPQR and WPS approved by TÜRK-AK EN ISO 15614-1:2017 (All welding operations are supervised by certified welding coordination engineers as per EN ISO 14731) Max. Working Pressure: 250 Bar Total Motor Power: 37 kW – IE3 Main Pump: 45 cm³ – REXROTH or PARKER Moving Table Fast Down Speed: 150 mm/sec Moving Table Drawing Speed: 12 mm/sec Moving Table Return Speed: 170 mm/sec Cushion Table Forward Speed: 30 mm/sec Main Cylinder Bore: Ø360 mm – Ck45 Cushion Cylinder Bore: Ø200 mm – Ck45 Auxiliary Acceleration Cylinders: 2 units Approximate Press Height: 4200 mm Approximate Press Width: 3250 mm Approximate Press Depth: 2200 mm Bottom Table Height from Floor: 1350 mm Pre-fill Valve: NG 125 Hydraulic Unit: REXROTH or PARKER Cooling System: EMMEGI – CIESSE – PARKER Off-line Filtration: REXROTH or PARKER Linear Scale: NOVATECHNIK or TURCK PLC Unit: DELTA Touch Panel Display: DELTA 7" Electrical Components: SIEMENS – SCHNEIDER Approximate Weight: 18 Ton Production Note This machine is manufactured by CRONOSSTECH in Turkey.

Κατάσταση: καινούργιο, Έτος κατασκευής: 2025, δύναμη συμπίεσης: 200 t, πλάτος τραπεζιού: 1.000 χιλ., μήκος τραπεζιού: 1.200 χιλ., δύναμη επαναφοράς: 70 t, διαδρομή: 800 χιλ., λειτουργική πίεση: 250 δοκός, Εξοπλισμός: τεκμηρίωση / εγχειρίδιο, φωτοηλεκτρικός φράκτης ασφαλείας, CRONOSSTECH CHSP 200/70 H-Type Hydraulic Deep Drawing (Spinning) Press – 8-Guided Slides General Description The CRONOSSTECH CHSP series H-type hydraulic deep drawing presses are engineered with a double-acting operating principle to provide controlled material flow for sheet metal forming, deep drawing, and spinning applications. The H-frame structure with 8 guides ensures maximum rigidity during pressing; parallelism and perpendicularity tolerances are stably maintained throughout the stroke. The CHSP 200/70 model, with a 200-ton main ram and a 70-ton cushion (blankholder) capacity, is designed for medium to high tonnage deep drawing and spinning operations. The frame construction is stress-relieved by vibration to guarantee longevity and reliable performance. ⚙️ Standard Equipment - Steel construction, 8-guide H-frame press design - Vibration stress-relieved body structure - Bronze Zr14 guide bushings - Welding applications approved by WPQR and WPS, accredited by TÜRK-AK (EN ISO 15614-1:2017 / EN ISO 14731) - Designed and manufactured in compliance with CE standards - PLC-controlled hydraulic system - 7” touch-screen interface (DELTA) - Adjustable stroke control for ram and cushion - Adjustable pressure/tonnage control for ram and cushion - Automatic lubrication system - Electronic filter contamination warning - Monitoring of hydraulic unit oil temperature and system status from panel - Cooling system - Off-line filtration - Safety systems for operator protection - SIEMENS – SCHNEIDER switchgear components 📐 Technical Specifications – CHSP 200/70 Type: Steel construction, 8-guide H-frame press Frame Material: St52 – ERDEMİR Guide Bushings: Bronze Zr14 Capacity (Ram): 200 Tons Capacity (Cushion): 70 Tons Movable Table Dimensions: 1000 × 1200 mm Fixed Table Dimensions: 1000 × 1200 mm Parallelism Tolerance: 120 micron/m Perpendicularity Tolerance: 60 micron/m Ram Stroke: 800 mm Cushion Stroke: 300 mm Gtodpex N T U Tjfx Aatst Min. Daylight: 100 mm Max. Daylight: 900 mm Weld Stress Relief: Vibration stress relief Welding Process: WPQR and WPS certified by TÜRK-AK EN ISO 15614-1/2017 (Welding operations are supervised by 'welding coordination engineers' certified to EN ISO 14731) Max. Operating Pressure: 250 Bar Total Motor Power: 22 kW – IE3 Main Pump: 32 cm³ – REXROTH or PARKER Movable Table Fast Down Speed: 150 mm/sec Movable Table Drawing Speed: 12 mm/sec Movable Table Return Speed: 170 mm/sec Cushion Table Advance Speed: 30 mm/sec Main Cylinder Bore: Ø320 mm – Ck45 Cushion Cylinder Bore: Ø190 mm – Ck45 Auxiliary Acceleration Cylinders: 2 units Approx. Press Height: 3800 mm Approx. Press Width: 2950 mm Approx. Press Depth: 2200 mm Distance from Floor to Lower Table: 1350 mm Pre-Fill Valve: NG 125 Hydraulic Unit: REXROTH or PARKER Cooling System: EMMEGI – CIESSE – PARKER Off-line Filtration: REXROTH or PARKER Linear Position Sensor: NOVATECHNIK or TURCK PLC Controller: DELTA Touch Panel Screen: DELTA 7” Switchgear: SIEMENS – SCHNEIDER Approximate Weight: 13.5 Tons Production Note This machine is manufactured by CRONOSSTECH in Turkey.

Κατάσταση: καινούργιο, Έτος κατασκευής: 2025, δύναμη συμπίεσης: 150 t, πλάτος τραπεζιού: 1.000 χιλ., μήκος τραπεζιού: 1.200 χιλ., δύναμη επαναφοράς: 50 t, διαδρομή: 600 χιλ., λειτουργική πίεση: 250 δοκός, Εξοπλισμός: τεκμηρίωση / εγχειρίδιο, φωτοηλεκτρικός φράκτης ασφαλείας, CRONOSSTECH CHSP 150/50 H-Type Hydraulic Deep Drawing (Spinning) Press – 8-Guided General Description The CRONOSSTECH CHSP series H-type hydraulic deep drawing presses are engineered with a double-acting working principle to ensure controlled material flow during sheet metal forming, deep drawing, and spinning applications. The 8-guided H-frame structure provides maximum rigidity during the pressing process, maintaining stable parallelism and perpendicularity tolerances throughout the stroke. The CHSP 150/50 model is designed for precise and repeatable deep drawing operations with a 150-ton main ram and a 50-ton lower blank holder (pot) capacity. The frame construction is stress-relieved by vibration for long-lasting and reliable operation. ⚙️ Standard Equipment - Steel construction, 8-guide H-frame press body - Vibration stress-relieved frame structure - Bronze Zr14 slideway bearings - TÜRK-AK accredited WPQR and WPS certified welding applications Gedpfx Aaex N T U Hststt (EN ISO 15614-1:2017 / EN ISO 14731) - Design and manufacturing in compliance with CE standards - PLC-controlled hydraulic system - Touch panel display (DELTA 7”) - Adjustable ram and pot stroke control - Adjustable ram and pot tonnage (pressure) control - Automatic lubrication system - Electronic filter contamination warning - Display of hydraulic unit oil temperature and system status on the screen - Cooling system - Off-line filtration - Safety systems for operator protection - SIEMENS – SCHNEIDER switchgear components 📐 Technical Specifications – CHSP 150/50 Type: Steel construction, 8-guide H-frame press Frame Material: St52 – ERDEMİR Slideway Bearings: Bronze Zr14 Ram Capacity: 150 Ton Pot Capacity: 50 Ton Moving Table Dimensions: 1000 × 1200 mm Fixed Table Dimensions: 1000 × 1200 mm Parallelism Tolerance: 120 micron/m Perpendicularity Tolerance: 60 micron/m Ram Stroke: 600 mm Pot Stroke: 200 mm Min. Daylight: 100 mm Max. Daylight: 700 mm Stress Relieving: By vibration Welding: WPQR and WPS certified by TÜRK-AK EN ISO 15614-1/2017 (Welding applications are supervised by “welding coordination engineers” certified according to EN ISO 14731) Max. Working Pressure: 250 Bar Total Motor Power: 18.5 kW – IE3 Main Pump: 32 cm³ – REXROTH or PARKER Moving Table Fast Down Speed: 150 mm/s Moving Table Drawing Speed: 12 mm/s Moving Table Return Speed: 170 mm/s Pot Table Forward Speed: 30 mm/s Main Cylinder Bore: Ø280 mm – Ck45 Pot Cylinder Bore: Ø160 mm – Ck45 Auxiliary Acceleration Cylinders: 2 units Approx. Press Height: 3650 mm Approx. Press Width: 2950 mm Approx. Press Depth: 2000 mm Lower Table Height from Floor: 1250 mm Pre-Fill Valve: NG 100 Hydraulic Unit: REXROTH or PARKER Cooling System: EMMEGI – CIESSE – PARKER Off-line Filtration: REXROTH or PARKER Linear Position Sensor: NOVATECHNIK or TURCK PLC System: DELTA Touch Panel: DELTA 7” Switchgear: SIEMENS – SCHNEIDER Approximate Weight: 11 Tons Production Note This machine is manufactured by CRONOSSTECH in Turkey.

Κατάσταση: καινούργιο, Έτος κατασκευής: 2025, δύναμη συμπίεσης: 100 t, πλάτος τραπεζιού: 1.000 χιλ., μήκος τραπεζιού: 1.200 χιλ., δύναμη επαναφοράς: 40 t, διαδρομή: 600 χιλ., λειτουργική πίεση: 250 δοκός, Εξοπλισμός: τεκμηρίωση / εγχειρίδιο, φωτοηλεκτρικός φράκτης ασφαλείας, CRONOSSTECH CHSP 100/40 Gjdpfx Ajx N T Uyeatott H-Type Hydraulic Deep Drawing (Hydroforming) Press – 8 Guideways General Description The CRONOSSTECH CHSP series H-type hydraulic deep drawing presses are designed with a double-acting operation principle to provide controlled material flow for sheet metal forming, deep drawing, and hydroforming applications. The 8-guideway H-frame construction ensures maximum rigidity during pressing; parallelism and perpendicularity tolerances are stably maintained throughout the stroke. The CHSP 100/40 model features a 100-ton main ram and a 40-ton blank holder (cushion) capacity, specifically engineered for precise deep drawing and hydroforming operations. The frame is stress-relieved via vibration, ensuring a long service life and reliable operation. ⚙️ Standard Equipment - Steel construction, 8-guideway H-frame body - Stress-relieved frame structure via vibration - Bronze Zr14 guide bushings - WPQR and WPS approved welding by TÜRK-AK accredited applications (EN ISO 15614-1:2017 / EN ISO 14731) - Design and manufacturing compliant with CE standards - PLC-controlled hydraulic system - Touchscreen control panel (DELTA 7”) - Adjustable ram and cushion stroke control - Adjustable ram and cushion tonnage (pressure) control - Automatic lubrication system - Electronically monitored filter contamination warning - Hydraulic unit oil temperature and system status displayed on-screen - Cooling system - Off-line filtration - Safety systems for operator protection - SIEMENS – SCHNEIDER switchgear components 📐 Technical Specifications – CHSP 100/40 Type: Steel construction, 8-guideway H-frame body Frame Material: St52 – ERDEMİR Guide Bushings: Bronze Zr14 Capacity (Ram): 100 Ton Capacity (Cushion): 40 Ton Moving Table Size: 1000 × 1200 mm Fixed Table Size: 1000 × 1200 mm Parallelism Tolerance: 120 micron/m Perpendicularity Tolerance: 60 micron/m Stroke (Ram): 600 mm Stroke (Cushion): 200 mm Min. Daylight: 100 mm Max. Daylight: 700 mm Weld Stress Relief: Vibration stress relief Welding Applications: WPQR and WPS approval by TÜRK-AK accredited certifier EN ISO 15614-1/2017 (Supervised by certified welding coordination engineers per EN ISO 14731) Max. Working Pressure: 250 Bar Total Motor Power: 11 kW – IE3 Main Pump: 22 cm³ – REXROTH or PARKER Moving Table Fast Down Speed: 150 mm/sec Moving Table Hydroforming Speed: 12 mm/sec Moving Table Return Speed: 170 mm/sec Cushion Table Advancing Speed: 30 mm/sec Main Cylinder Bore: Ø230 mm – Ck45 Cushion Cylinder Bore: Ø140 mm – Ck45 Auxiliary Acceleration Cylinders: 2 units Approx. Press Height: 3400 mm Approx. Press Width: 2950 mm Approx. Press Depth: 2000 mm Lower Table Height from Floor: 1250 mm Pre-Fill Valve: NG 100 Hydraulic Power Unit: REXROTH or PARKER Cooling System: EMMEGI – CIESSE – PARKER Off-line Filtration: REXROTH or PARKER Linear Scale: NOVATECHNIK or TURCK PLC Application: DELTA Touchscreen Panel: DELTA 7” Switchgear: SIEMENS – SCHNEIDER Approximate Weight: 9 Tons Production Note This machine is manufactured by CRONOSSTECH in Turkey.

Κατάσταση: καινούργιο, Έτος κατασκευής: 2025, δύναμη συμπίεσης: 2.500 t, πλάτος τραπεζιού: 1.800 χιλ., μήκος τραπεζιού: 2.600 χιλ., διαδρομή: 1.000 χιλ., λειτουργική πίεση: 250 δοκός, Εξοπλισμός: τεκμηρίωση / εγχειρίδιο, φωτοηλεκτρικός φράκτης ασφαλείας, CRONOSSTECH CHP 2500 H-Type Hydraulic Press – 8 Sliding Guides General Description The CRONOSSTECH CHP series H-type hydraulic presses are engineered for heavy-duty forming, deep drawing, and embossing operations requiring very high tonnage. The 8-slide H-frame structure ensures maximum rigidity during the pressing process; parallelism and perpendicularity tolerances are reliably maintained throughout the long stroke. The CHP 2500 model, with its large bed dimensions, multi-cylinder main pressing system and high-capacity hydraulic unit, is designed for automotive, heavy industry, defense industry, and high-tonnage die applications. The frame is stress-relieved by vibration to ensure long service life and reliable operation. ⚙️ Standard Equipment - Steel construction, 8-slide H-frame press body - Stress-relieved frame structure by vibration - Bronze Zr14 slide bearings - Welding applications certified with TÜRK-AK accredited WPQR and WPS (EN ISO 15614-1:2017 / EN ISO 14731) - Design and manufacturing comply with CE standards - PLC-controlled hydraulic system - Touch panel display (DELTA 7”) - Adjustable ram stroke and tonnage control - Automatic lubrication system - Electronic filter contamination monitoring - On-screen monitoring of hydraulic oil temperature and system status - Cooling system - Off-line filtration - Safety systems for operator protection - SIEMENS – SCHNEIDER electrical components 📐 Technical Specifications – CHP 2500 Gedox N T S Eepfx Aatett Type: Steel construction, 8-slide H-frame press body Frame Material: St52 – ERDEMİR Slide Bearings: Bronze Zr14 Capacity (Ram): 2500 Tons Movable Table Size: 1800 × 2600 mm Fixed Table Size: 1800 × 2600 mm Parallelism Tolerance: 120 micron/m Perpendicularity Tolerance: 60 micron/m Stroke (Ram): 1000 mm Min. Daylight: 200 mm Max. Daylight: 1200 mm Stress Relief: Vibration stress relief Welding Application: TÜRK-AK accredited WPQR & WPS, EN ISO 15614-1/2017 Max. Operating Pressure: 250 Bar Total Motor Power: 180 kW – IE3 Main Pump: 140 cm³ – REXROTH or PARKER Movable Table Fast Down Speed: 150 mm/s Movable Table Forming Speed: 12 mm/s Movable Table Return Speed: 170 mm/s Main Cylinder Inner Diameter: Ø565 mm – Ck45 (4 units) Auxiliary Acceleration Cylinders: 2 units Approx. Height of Press: 6500 mm Approx. Width of Press: 3950 mm Approx. Depth of Press: 2600 mm Bottom Table Height from Floor: 1500 mm Pre-fill Valve: NG 200 Hydraulic Unit: REXROTH or PARKER Cooling System: EMMEGI – CIESSE – PARKER Off-line Filtration: REXROTH or PARKER Linear Scale: NOVATECHNIK or TURCK PLC Application: DELTA Touch Panel Display: DELTA 7” Switchgear Components: SIEMENS – SCHNEIDER Approximate Weight: 120 Tons Production Note This machine is manufactured by CRONOSSTECH in Turkey.

Κατάσταση: καινούργιο, Έτος κατασκευής: 2025, δύναμη συμπίεσης: 2.000 t, πλάτος τραπεζιού: 1.500 χιλ., μήκος τραπεζιού: 2.500 χιλ., διαδρομή: 1.000 χιλ., λειτουργική πίεση: 250 δοκός, Εξοπλισμός: τεκμηρίωση / εγχειρίδιο, φωτοηλεκτρικός φράκτης ασφαλείας, CRONOSSTECH CHP 2000 H-Type Hydraulic Press – 8 Guides General Description The CRONOSSTECH CHP series H-type hydraulic presses are designed for heavy forming, deep drawing, spinning, and die applications that require very high tonnage. The 8-guide H-frame construction ensures maximum rigidity during pressing and maintains parallelism and perpendicularity tolerances throughout the long stroke. The CHP 2000 model, with its large table dimensions, high-capacity hydraulic system, and powerful drive, is a reliable and durable solution for automotive, defense industry, heavy industry, and high-tonnage production lines. The frame structure is stress-relieved by vibration for stable operation. Gtodpfx Aox N T Sroatot ⚙️ Standard Equipment - Steel construction, H-frame with 8 guides - Stress-relieved frame by vibration - Bronze Zr14 guide bushings - TURK-AK accredited WPQR and WPS certified welding applications (EN ISO 15614-1:2017 / EN ISO 14731) - Design and manufacturing in compliance with CE standards - PLC-controlled hydraulic system - 7” DELTA touchscreen panel - Adjustable ram stroke and tonnage control - Automatic lubrication system - Electronically controlled filter contamination alert - Display of hydraulic unit oil temperature and system status on screen - Cooling system - Off-line filtration - Safety systems for operator protection - SIEMENS – SCHNEIDER switching components 📐 Technical Specifications – CHP 2000 Type: Steel construction, H-frame with 8 guides Frame Material: St52 – ERDEMİR Guide Bushings: Bronze Zr14 Capacity (Ram): 2000 Ton Moving Table Dimensions: 1500 × 2500 mm Fixed Table Dimensions: 1500 × 2500 mm Parallelism Tolerance: 120 micron/m Perpendicularity Tolerance: 60 micron/m Stroke (Ram): 1000 mm Min. Daylight: 200 mm Max. Daylight: 1200 mm Stress Relief: Vibratory stress relief Welding Application: WPQR and WPS certified by TURK-AK under EN ISO 15614-1/2017 welding application certificate Max. Working Pressure: 250 Bar Total Motor Power: 180 kW – IE3 Main Pump: 140 cm³ – REXROTH or PARKER Moving Table Fast Down Speed: 150 mm/s Moving Table Spinning Speed: 12 mm/s Moving Table Return Speed: 170 mm/s Main Cylinder Inner Diameter: Ø720 mm – Ck45 (2 pcs) Auxiliary Acceleration Cylinders: 2 pcs Approx. Press Height: 6300 mm Approx. Press Width: 3850 mm Approx. Press Depth: 2500 mm Lower Table Height from Floor: 1500 mm Pre-fill Valve: NG 200 Hydraulic Unit: REXROTH or PARKER Cooling System: EMMEGI – CIESSE – PARKER Off-line Filtration: REXROTH or PARKER Linear Encoder: NOVATECHNIK or TURCK PLC Application: DELTA Touchscreen Panel: DELTA 7” Switching Components: SIEMENS – SCHNEIDER Approximate Weight: 95 Ton Production Note This machine is manufactured by CRONOSSTECH in Turkey.

Κατάσταση: καινούργιο, Έτος κατασκευής: 2025, δύναμη συμπίεσης: 1.500 t, πλάτος τραπεζιού: 1.500 χιλ., μήκος τραπεζιού: 2.400 χιλ., διαδρομή: 1.000 χιλ., λειτουργική πίεση: 250 δοκός, Εξοπλισμός: τεκμηρίωση / εγχειρίδιο, φωτοηλεκτρικός φράκτης ασφαλείας, CRONOSSTECH CHP 1500 H-Type Hydraulic Deep Drawing Press – 8-Guided General Description The CRONOSSTECH CHP series H-type hydraulic deep drawing presses are designed for deep drawing, spinning, and heavy forming applications that require high tonnage. The 8-guided H-frame structure provides maximum rigidity and stability during pressing, ensuring the maintenance of parallelism and perpendicularity tolerances. The CHP 1500 model, with its large table dimensions, robust hydraulic system, and high stroke capacity, delivers a reliable solution for automotive, defense, heavy metal forming, and industrial production lines. The frame is stress-relieved through vibration to ensure long-term durability and stable operation. ⚙️ Standard Equipment - Steel construction, 8-guided H-frame press body - Stress-relieved frame (by vibration) - Bronze Zr14 slide bearings - WPQR and WPS certified welding applications accredited by TÜRK-AK (EN ISO 15614-1:2017 / EN ISO 14731) - Design and manufacturing in accordance with CE standards - PLC-controlled hydraulic system - 7” DELTA touch panel screen - Adjustable ram stroke and tonnage control - Automatic lubrication system - Electronically controlled filter contamination warning - Real-time monitoring of hydraulic unit oil temperature and system status on screen - Cooling system - Off-line filtration - Safety systems for operator protection - SIEMENS – SCHNEIDER switchgear components 📐 Technical Specifications – CHP 1500 Type: Steel construction, 8-guided H-frame press body Frame Material: St52 – ERDEMİR Slide Bearings: Bronze Zr14 Capacity (Ram): 1,500 Ton Moving Table Size: 1,500 × 2,400 mm Fixed Table Size: 1,500 × 2,400 mm Parallelism Tolerance: 120 microns/m Perpendicularity Tolerance: 60 microns/m Stroke (Ram): 1,000 mm Min. Daylight: 200 mm Max. Daylight: 1,200 mm Stress Relief: Vibratory stress relief Welding Application: WPQR and WPS certified by TÜRK-AK, EN ISO 15614-1:2017 Max. Working Pressure: 250 Bar Total Motor Power: 90 kW – IE3 Main Pump: 101 cm³ – REXROTH or PARKER Rapid Down Speed (Moving Table): 150 mm/s Deep Drawing Speed (Moving Table): 12 mm/s Return Speed (Moving Table): 170 mm/s Main Cylinder Inner Diameter: Ø620 mm – Ck45 (2 units) Auxiliary Acceleration Cylinders: 2 units Approximate Height of the Press: 6,250 mm Approximate Width of the Press: 3,750 mm Gtsdpfx Aex N T R Ujatet Approximate Depth of the Press: 2,500 mm Lower Table Height from Floor: 1,500 mm Pre-fill Valve: NG 200 Hydraulic Power Unit: REXROTH or PARKER Cooling System: EMMEGI – CIESSE – PARKER Off-line Filtration: REXROTH or PARKER Linear Scale: NOVATECHNIK or TURCK PLC Application: DELTA Touch Panel Screen: DELTA 7” Switchgear Components: SIEMENS – SCHNEIDER Approximate Weight: 70 Tons Production Note This machine is manufactured by CRONOSSTECH in Turkey.

Κατάσταση: καινούργιο, Έτος κατασκευής: 2025, δύναμη συμπίεσης: 1.200 t, πλάτος τραπεζιού: 1.500 χιλ., μήκος τραπεζιού: 2.000 χιλ., διαδρομή: 1.000 χιλ., λειτουργική πίεση: 250 δοκός, Εξοπλισμός: τεκμηρίωση / εγχειρίδιο, φωτοηλεκτρικός φράκτης ασφαλείας, CRONOSSTECH CHP 1200 H-Type Hydraulic Deep Drawing Press – 8-Guided Slides General Description The CRONOSSTECH CHP series H-type hydraulic deep drawing presses are specifically designed for deep drawing, forming, shaping, and heavy-duty pressing applications. Thanks to its 8-guided H-frame structure, it provides maximum rigidity, stability, and precision under high tonnage. The CHP 1200 model offers reliable and long-lasting performance for industrial production lines requiring high force. The frame structure is stress relieved using vibrational methods, ensuring that the loads generated during pressing are evenly distributed, maintaining parallelism and perpendicularity tolerances. ⚙️ Standard Equipment Gsdex N T Ruspfx Aatjtt - Steel construction, 8-guided H-frame press type - Stress-relieved frame structure via vibration - Zr14 bronze slide bearings - WPQR and WPS approved welding operations accredited by TÜRK-AK (EN ISO 15614-1:2017 / EN ISO 14731) - Design and manufacturing in compliance with CE standards - PLC-controlled hydraulic system - 7’’ DELTA touchscreen control panel - Adjustable ram stroke and tonnage control - Automatic lubrication system - Electronic filter contamination warning - Visualization of hydraulic oil temperature and system status on the screen - Cooling system - Off-line filtration - Safety systems for operator protection - SIEMENS – SCHNEIDER electrical components 📐 Technical Specifications – CHP 1200 - Type: Steel construction, 8-guided H-frame press type - Frame Material: St52 – ERDEMİR - Slide Bearings: Zr14 Bronze - Capacity (Ram): 1200 Ton - Moving Table Dimensions: 1500 × 2000 mm - Fixed Table Dimensions: 1500 × 2000 mm - Parallelism Tolerance: 120 micron/m - Perpendicularity Tolerance: 60 micron/m - Stroke (Ram): 1000 mm - Min. Daylight: 100 mm - Max. Daylight: 1100 mm - Stress Relieving: Through vibration - Welding Application: TÜRK-AK accredited, WPQR & WPS certified, EN ISO 15614-1/2017 - Max. Working Pressure: 250 Bar - Total Motor Power: 75 kW – IE3 - Main Pump: 70 cm³ – REXROTH or PARKER - Fast Down Speed (Moving Table): 150 mm/s - Drawing Speed (Moving Table): 12 mm/s - Return Speed (Moving Table): 170 mm/s - Main Cylinder Bore: Ø560 mm – Ck45 (2 units) - Auxiliary Acceleration Cylinders: 2 units - Approx. Press Height: 6100 mm - Approx. Press Width: 3550 mm - Approx. Press Depth: 2400 mm - Lower Table Height (from floor): 1450 mm - Pre-fill Valve: NG 200 - Hydraulic Unit: REXROTH or PARKER - Cooling System: EMMEGI – CIESSE – PARKER - Off-line Filtration: REXROTH or PARKER - Linear Measurement Scale: NOVATECHNIK or TURCK - PLC Application: DELTA - Touch Panel Display: DELTA 7” - Switchgear Components: SIEMENS – SCHNEIDER - Approximate Weight: 60 Ton Production Note This machine is manufactured by CRONOSSTECH in Turkey.

Κατάσταση: καινούργιο, Έτος κατασκευής: 2025, δύναμη συμπίεσης: 1.000 t, πλάτος τραπεζιού: 1.500 χιλ., μήκος τραπεζιού: 2.000 χιλ., διαδρομή: 1.000 χιλ., λειτουργική πίεση: 250 δοκός, Εξοπλισμός: τεκμηρίωση / εγχειρίδιο, φωτοηλεκτρικός φράκτης ασφαλείας, CRONOSSTECH CHP 1000 H-Type Single-Acting Hydraulic Press – 8 Guide Rails General Description The CRONOSSTECH CHP series H-type single-acting hydraulic presses are designed for sheet metal forming, deep drawing, straightening, and heavy-duty pressing applications that require high tonnage. The H-frame structure with 8 guide rails ensures even distribution of high forces generated during pressing operations, providing maximum rigidity, precision, and long service life. The CHP 1000 model is engineered to deliver reliable and stable performance for heavy industrial production lines. CHP Series – Structural Features CHP series presses are engineered with heavy industry requirements in mind. The frame and main load-bearing structures are stress-relieved using vibration techniques. Bronze Zr14 guide bushings ensure smooth load distribution and high precision throughout the ram movement. ⚙️ Standard Equipment - Steel construction, 8-guide-rail H-type press frame - Stress-relieved frame structure by vibration - Bronze Zr14 guide bushings - Turkiye Accreditation Agency (TÜRK-AK) accredited WPQR & WPS certified welding (EN ISO 15614-1:2017 / EN ISO 14731) - Design and manufacturing in accordance with CE standards - PLC-controlled hydraulic system - Touch panel display (DELTA 7”) - Adjustable ram stroke and tonnage control - Automatic lubrication system - Electronic filter contamination warning - Real-time monitoring of hydraulic oil temperature and system status - Cooling system - Off-line filtration - Dual-hand control system - Light barrier (standard for operator safety) - SIEMENS – SCHNEIDER switching components 📐 Technical Specifications – CHP 1000 Type: Steel construction, 8-guide-rail H-frame press Frame Material: St52 – ERDEMIR Guide Bushings: Bronze Zr14 Capacity (Ram): 1000 Ton Movable Table Dimensions: 1500 × 2000 mm Fixed Table Dimensions: 1500 × 2000 mm Parallelism Tolerance: 120 micron/m Perpendicularity Tolerance: 60 micron/m Stroke (Ram): 1000 mm Min. Daylight: 100 mm Max. Daylight: 1100 mm Stress Relief: Vibration stress relief Welding Certification: EN ISO 15614-1/2017, WPQR and WPS certified by TÜRK-AK Max. Operating Pressure: 250 Bar Total Motor Power: 75 kW – IE3 Main Pump: 70 cm³ – REXROTH or PARKER Movable Table Fast Descent Speed: 150 mm/s Movable Table Pressing Speed: 12 mm/s Movable Table Return Speed: 170 mm/s Main Cylinder Inner Diameter: Ø500 mm – Ck45 (2 pcs) Auxiliary Acceleration Cylinders: 2 pcs Approximate Height: 6000 mm Approximate Width: 3450 mm Approximate Depth: 2400 mm Lower Table Height from Ground: 1450 mm Main Pre-Fill Valve: NG 200 Hydraulic Unit: REXROTH or PARKER Cooling System: EMMEGI – CIESSE – PARKER Off-line Filtration: REXROTH or PARKER Linear Scale: NOVATECHNIK or TURCK Gtedpfxjx N T Rbj Aatst PLC Application: DELTA Touch Display: DELTA 7” Switching Components: SIEMENS – SCHNEIDER Approximate Weight: 55 Tons Production Note This machine is manufactured by CRONOSSTECH in Turkey.

Κατάσταση: καινούργιο, Έτος κατασκευής: 2025, δύναμη συμπίεσης: 800 t, πλάτος τραπεζιού: 1.500 χιλ., μήκος τραπεζιού: 2.000 χιλ., διαδρομή: 800 χιλ., λειτουργική πίεση: 250 δοκός, Εξοπλισμός: τεκμηρίωση / εγχειρίδιο, φωτοηλεκτρικός φράκτης ασφαλείας, CRONOSSTECH CHP 800 H-Type Single Acting Hydraulic Press – 8 Slide Guides General Description The CRONOSSTECH CHP series H-type single acting hydraulic presses are designed for heavy-duty sheet metal forming, straightening, assembly, and high-tonnage pressing applications. The 8-slide H-frame construction ensures balanced distribution of high forces generated during pressing, providing maximum rigidity and long operational life. The CHP 800 model is developed to deliver reliable and stable performance for high-capacity production lines. CHP Series – Structural Features The CHP series presses are engineered considering heavy industrial conditions. The body and main load-bearing components are stress-relieved by vibration. Bronze Zr14 slide bearings ensure smooth load distribution and precise operation along the ram stroke. ⚙️ Standard Equipment - Steel construction, 8-way slide-guided H-frame press body Gsdpfx Aaox N T Nketjtt - Vibration stress-relieved frame structure - Bronze Zr14 slide bearings - WPQR & WPS certified welding, inspected and accredited by TÜRK-AK (EN ISO 15614-1:2017 / EN ISO 14731) - Design and manufacturing in compliance with CE standards - PLC-controlled hydraulic system - Touch panel display (DELTA 7”) - Adjustable ram stroke and tonnage control - Automatic lubrication system - Electronic filter contamination warning system - On-screen monitoring of hydraulic unit oil temperature and system status - Cooling system - Off-line filtration - Two-hand control system - Light curtain (operator safety standard) - SIEMENS – SCHNEIDER switchgear components 📐 Technical Specifications – CHP 800 Type: Steel construction, 8-slide-guided H-frame press Frame Material: St52 – ERDEMİR Slide Bearing: Bronze Zr14 Capacity (Ram): 800 Tons Moving Table Size: 1500 × 2000 mm Fixed Table Size: 1500 × 2000 mm Parallelism Tolerance: 120 micron/m Perpendicularity Tolerance: 60 micron/m Stroke (Ram): 800 mm Min. Daylight Opening: 100 mm Max. Daylight Opening: 900 mm Weld Stress Relief: Vibration Weld Application: WPQR and WPS certified welding accredited by TÜRK-AK (EN ISO 15614-1:2017), inspected by certified welding coordination engineers under EN ISO 14731 Max. Working Pressure: 250 Bar Total Motor Power: 75 kW – IE3 Main Pump: 70 cm³ – REXROTH or PARKER Moving Table Fast Descent Speed: 150 mm/sec Moving Table Pressing Speed: 12 mm/sec Moving Table Return Speed: 170 mm/sec Main Cylinder Internal Diameter: Ø390 mm – Ck45 (2 pcs) Auxiliary Acceleration Cylinders: 2 pcs Approximate Press Height: 6000 mm Approximate Press Width: 3350 mm Approximate Press Depth: 2700 mm Lower Table Height from Floor: 1450 mm Pre-fill Valve: NG 200 Hydraulic Power Unit: REXROTH or PARKER Cooling System: EMMEGI – CIESSE – PARKER Off-line Filtration: REXROTH or PARKER Linear Position Ruler: NOVATECHNIK or TURCK PLC Application: DELTA Touch Panel Display: DELTA 7” Switchgear Components: SIEMENS – SCHNEIDER Approximate Weight: 45 Ton Production Note This machine is manufactured by CRONOSSTECH in Turkey.

Κατάσταση: καινούργιο, Έτος κατασκευής: 2025, δύναμη συμπίεσης: 600 t, πλάτος τραπεζιού: 1.200 χιλ., μήκος τραπεζιού: 1.500 χιλ., διαδρομή: 800 χιλ., λειτουργική πίεση: 250 δοκός, Εξοπλισμός: τεκμηρίωση / εγχειρίδιο, φωτοηλεκτρικός φράκτης ασφαλείας, CRONOSSTECH CHP 600 H-Type Single-Acting Hydraulic Press – 8-Guided Slides General Description The CRONOSSTECH CHP series H-type single-acting hydraulic presses are robust industrial machines engineered for sheet metal forming, straightening, assembly, and heavy-duty pressing applications. The 8-guide H-frame structure ensures balanced load distribution during pressing, resulting in long service life and stable operation. The CHP 600 model is designed to deliver reliable performance for production processes requiring high tonnage. CHP Series – Structural Features CHP series presses are designed for heavy-duty operations. The frame and carrier components are stress-relieved using vibration techniques. Bronze Zr14 slide bushings ensure uniform load distribution and high precision throughout the ram stroke. ⚙️ Standard Equipment • Welded steel construction, H-frame with 8 guide slides • Stress-relieved frame (vibration method) • Bronze Zr14 slide bushings • TURK-AK accredited WPQR & WPS certified welding (EN ISO 15614-1:2017 / EN ISO 14731) • Design and manufacturing conforming to CE standards • PLC-controlled hydraulic system • 7” DELTA touchscreen panel • Adjustable ram stroke and tonnage control • Automatic lubrication system • Electronic contamination indicator for hydraulic filters • On-screen monitoring of hydraulic oil temperature and system status • Cooling system • Off-line filtration • Dual-hand control system • Light barrier (standard for operator safety) • SIEMENS – SCHNEIDER switchgear components 📐 Technical Specifications – CHP 600 Type: Welded steel construction, H-frame with 8 guide slides Frame Material: St52 – ERDEMIR Gsdpfxsx N T Iao Aatstt Slide Bushings: Bronze Zr14 Capacity (Ram): 600 Tons Moving Table Dimensions: 1200 × 1500 mm Fixed Table Dimensions: 1200 × 1500 mm Parallelism Tolerance: 120 microns/meter Perpendicularity Tolerance: 60 microns/meter Ram Stroke: 800 mm Min. Daylight: 100 mm Max. Daylight: 900 mm Stress Relief: Vibration method Welding: TURK-AK accredited WPQR & WPS certified (EN ISO 15614-1/2017), inspected by certified welding coordinators (EN ISO 14731) Max. Working Pressure: 250 Bar Total Motor Power: 55 kW – IE3 Main Pump: 70 cm³ – REXROTH or PARKER Moving Table Fast Approach Speed: 150 mm/sec Moving Table Pressing Speed: 12 mm/sec Moving Table Return Speed: 170 mm/sec Main Cylinder Bore Diameter: Ø550 mm – Ck45 Pot Cylinder Bore Diameter: Ø320 mm – Ck45 Auxiliary Acceleration Cylinders: 2 units Approx. Press Height: 5,900 mm Approx. Press Width: 3,250 mm Approx. Press Depth: 2,300 mm Lower Table Height from Ground: 1,400 mm Pre-Fill Valve: NG 150 Hydraulic Unit: REXROTH or PARKER Cooling System: EMMEGI – CIESSE – PARKER Off-line Filtration: REXROTH or PARKER Linear Position Sensor: NOVATECHNIK or TURCK PLC Application: DELTA Touch Screen Panel: DELTA 7” Switchgear Components: SIEMENS – SCHNEIDER Approximate Weight: 28 Tons Production Note This machine is manufactured by CRONOSSTECH in Turkey.

Κατάσταση: καινούργιο, Έτος κατασκευής: 2025, δύναμη συμπίεσης: 500 t, πλάτος τραπεζιού: 1.200 χιλ., μήκος τραπεζιού: 1.500 χιλ., διαδρομή: 1.000 χιλ., λειτουργική πίεση: 250 δοκός, Εξοπλισμός: τεκμηρίωση / εγχειρίδιο, φωτοηλεκτρικός φράκτης ασφαλείας, CRONOSSTECH CHP 500 H-Type Single-Acting Hydraulic Press – 8 Guided Sliders General Description The CRONOSSTECH CHP series H-type single-acting hydraulic presses are robust industrial press solutions developed for sheet metal forming, straightening, assembly, and die pressing applications. The 8-slider H-frame structure ensures stable and repeatable operation by providing balanced distribution of high loads during pressing. The CHP 500 model is designed for heavy-duty production processes that demand high tonnage, targeting long-lasting and reliable performance. CHP Series – Structural Features CHP series presses are designed specifically for demanding, heavy-duty operation. The frame and load-bearing components are stress-relieved by vibratory methods. Bronze Zr14 slider bushings ensure even load distribution along the ram stroke, maintaining long-term precision. ⚙️ Standard Equipment - Steel construction, H-type frame with 8 guided sliders - Vibratory stress-relieved frame and load-bearing parts - Bronze Zr14 slider bushings - WPQR & WPS certified and TÜRK-AK accredited welding applications (EN ISO 15614-1:2017 / EN ISO 14731) - Machine structure designed and manufactured according to CE standards - PLC-controlled hydraulic system - DELTA 7” touch screen - Adjustable ram stroke and tonnage control - Automatic lubrication system - Electronic filter contamination alert - Monitoring of hydraulic unit oil temperature and system status via screen - Cooling system - Off-line filtration - Two-hand control system - Light barrier (standard for operator safety) - SIEMENS – SCHNEIDER control components Gtsdpfxex N T H As Aatot 📐 Technical Specifications – CHP 500 Type: Steel construction, H-type frame with 8 guided sliders Frame Material: St52 – ERDEMİR Slider Bushings: Bronze Zr14 Capacity (Ram): 500 Tons Moving Table Dimensions: 1200 × 1500 mm Fixed Table Dimensions: 1200 × 1500 mm Parallelism Tolerance: 120 micron/meter Perpendicularity Tolerance: 60 micron/meter Ram Stroke: 1000 mm Min. Daylight Opening: 100 mm Max. Daylight Opening: 1100 mm Stress Relief: Vibratory method ding Welding Application: WPQR & WPS certified by TÜRK-AK, holds EN ISO 15614-1/2017 welding certificate (inspected by certified welding coordination engineers according to EN ISO 14731) Max. Working Pressure: 250 Bar Total Motor Power: 45 kW – IE3 Main Pump: 70 cm³ – REXROTH or PARKER Rapid Descent Speed (Moving Table): 150 mm/sec Drawing Speed (Moving Table): 12 mm/sec Return Speed (Moving Table): 170 mm/sec Main Cylinder Inner Diameter: Ø500 mm – Ck45 Auxiliary Acceleration Cylinders: 2 units Approx. Press Height: 5800 mm Approx. Press Width: 3250 mm Approx. Press Depth: 2200 mm Bottom Table Height from Floor: 1400 mm Pre-fill Valve: NG 150 Hydraulic Power Unit: REXROTH or PARKER Cooling System: EMMEGI – CIESSE – PARKER Off-line Filtration: REXROTH or PARKER Linear Distance Scale: NOVATECHNIK or TURCK PLC: DELTA Touch Panel: DELTA 7” Control Components: SIEMENS – SCHNEIDER Approximate Weight: 23 Tons Production Note This machine is manufactured by CRONOSSTECH in Turkey.

Κατάσταση: καινούργιο, Έτος κατασκευής: 2025, δύναμη συμπίεσης: 400 t, πλάτος τραπεζιού: 1.200 χιλ., μήκος τραπεζιού: 1.500 χιλ., διαδρομή: 800 χιλ., λειτουργική πίεση: 250 δοκός, Εξοπλισμός: τεκμηρίωση / εγχειρίδιο, φωτοηλεκτρικός φράκτης ασφαλείας, CRONOSSTECH CHP 400 H-Type Single-Acting Hydraulic Press – 8-Guided Slides General Description The CRONOSSTECH CHP series H-type single-acting hydraulic presses are robust industrial press solutions developed for sheet metal forming, straightening, assembly, and die pressing applications. Thanks to its 8-guide H-frame structure, the high loads generated during pressing are evenly distributed, offering stable and repeatable operation. The CHP 400 model is engineered to deliver long-lasting, reliable performance for heavy-duty applications demanding high tonnage. CHP Series – Structural Features CHP series presses are designed with heavy-duty operation in mind. The frame and carrier components are stress-relieved using vibration methods. Bronze Zr14 slide bushings ensure even load distribution during ram movement, which contributes to long-term precision. ⚙️ Standard Equipment Steel construction, H-type press frame with 8 guides Stress-relieved frame and carrier components by vibration Bronze Zr14 slide bushings WPQR & WPS certified welding applications with TÜRK-AK accreditation (EN ISO 15614-1:2017 / EN ISO 14731) Machinery designed and manufactured in compliance with CE standards PLC-controlled hydraulic system Touch panel display (DELTA 7”) Adjustable ram stroke and tonnage control Automatic lubrication system Electronic filter contamination warning Monitoring of hydraulic unit oil temperature and system status via display Cooling system Off-line filtration Two-hand control system Light barrier (standard for operator safety) SIEMENS – SCHNEIDER switchgear components 📐 Technical Specifications – CHP 400 Type: Steel construction, 8-guided H-frame press type Frame Material: St52 – ERDEMİR Slide Bushings: Bronze Zr14 Capacity (Ram): 400 Ton Movable Table Dimensions: 1200 × 1500 mm Fixed Table Dimensions: 1200 × 1500 mm Parallelism Tolerance: 120 micron/meter Perpendicularity Tolerance: 60 micron/meter Stroke (Ram): 800 mm Min. Daylight: 100 mm Max. Daylight: 900 mm Weld Stress Relief: Stress relieved by vibration Welding Application: WPQR and WPS certified by TÜRK-AK according to EN ISO 15614-1/2017, audited by welding coordination engineers certified to EN ISO 14731 Max. Working Pressure: 250 Bar Total Motor Power: 37 kW – IE3 Main Pump: 45 cm³ – REXROTH or PARKER Movable Table Rapid Descent Speed: 150 mm/sec Movable Table Pressing Speed: 12 mm/sec Movable Table Return Speed: 170 mm/sec Main Cylinder Bore: Ø450 mm – Ck45 Auxiliary Acceleration Cylinders: 2 pcs. Approximate Machine Height: 5600 mm Approximate Machine Width: 3250 mm Approximate Machine Depth: 2200 mm Lower Table Height from Floor: 1400 mm Pre-fill Valve: NG 150 Hydraulic Unit: REXROTH or PARKER Cooling System: EMMEGI – CIESSE – PARKER Off-line Filtration: REXROTH or PARKER Linear Scale: NOVATECHNIK or TURCK PLC Application: DELTA Touch Panel Display: DELTA 7” Switchgear Components: SIEMENS – SCHNEIDER Approx. Weight: 19.5 Tons Gtodpfex N T Hpsx Aatjt Production Note This machine is manufactured by CRONOSSTECH in Turkey.

Κατάσταση: καινούργιο, Έτος κατασκευής: 2025, δύναμη συμπίεσης: 300 t, πλάτος τραπεζιού: 1.000 χιλ., μήκος τραπεζιού: 1.200 χιλ., διαδρομή: 600 χιλ., λειτουργική πίεση: 250 δοκός, Εξοπλισμός: τεκμηρίωση / εγχειρίδιο, φωτοηλεκτρικός φράκτης ασφαλείας, CRONOSSTECH CHP 300 H-Frame Single-Acting Hydraulic Press – 8-Guided Slides Gtsdpfsx N T E Ejx Aatst General Description The CRONOSSTECH CHP series H-frame single-acting hydraulic presses are high-rigidity industrial solutions developed for sheet metal forming, straightening, assembly, and die-pressing applications. Thanks to its 8-guide H-frame structure, the high loads generated during pressing are evenly distributed, enabling stable and repeatable operation. The CHP 300 model is designed to deliver long-lasting, reliable performance for medium to high tonnage production processes. CHP Series – Structural Features CHP series presses are engineered with heavy-duty operation in mind. The frame and supporting components are stress-relieved by vibration. The Bronze Zr14 slide bearing system ensures uniform load distribution during ram movement, maintaining precision over prolonged use. ⚙️ Standard Equipment - Steel construction, H-frame body with 8-guided slides - Vibratory stress-relieved frame and supporting parts - Bronze Zr14 slide bearings - WPQR & WPS welding procedures approved by TÜRK-AK accreditation (EN ISO 15614-1:2017 / EN ISO 14731) - Machine design and manufacturing in accordance with CE standards - PLC-controlled hydraulic system - 7” touch panel screen (DELTA) - Adjustable ram stroke and tonnage settings - Automatic lubrication system - Electronic filter contamination alert - Hydraulic oil temperature and system status monitoring on screen - Cooling system - Off-line filtration - Dual-hand control system - Light curtain (operator safety standard) - SIEMENS – SCHNEIDER electrical components 📐 Technical Specifications – CHP 300 - Type: Steel construction, H-frame with 8-guided slides - Frame Material: St52 – ERDEMİR - Slide Bearing: Bronze Zr14 - Capacity (Ram): 300 Ton - Movable Table Size: 1000 × 1200 mm - Fixed Table Size: 1000 × 1200 mm - Parallelism Tolerance: 120 microns/meter - Perpendicularity Tolerance: 60 microns/meter - Stroke (Ram): 600 mm - Min. Daylight: 100 mm - Max. Daylight: 700 mm - Stress Relief: Vibratory stress relief - Welding: WPQR and WPS certified welding, accredited by TÜRK-AK, certified according to EN ISO 15614-1:2017 (supervised by cert. welding coordinators as per EN ISO 14731) - Max. Working Pressure: 250 Bar - Total Motor Power: 37 kW – IE3 - Main Pump: 45 cm³ – REXROTH or PARKER - Movable Table Fast Down Speed: 150 mm/s - Movable Table Forming Speed: 12 mm/s - Movable Table Return Speed: 170 mm/s - Main Cylinder Bore: Ø390 mm – Ck45 - Auxiliary Acceleration Cylinders: 2 pcs - Approx. Height: 4400 mm - Approx. Width: 3250 mm - Approx. Depth: 2200 mm - Lower Table Height from Floor: 1350 mm - Pre-Fill Valve: NG 150 - Hydraulic Unit: REXROTH or PARKER - Cooling System: EMMEGI – CIESSE – PARKER - Off-line Filtration: REXROTH or PARKER - Linear Position Transducer: NOVATECHNIK or TURCK - PLC Application: DELTA - Touch Panel Screen: DELTA 7” - Switchgear: SIEMENS – SCHNEIDER - Approximate Weight: 10.5 Ton Production Note This machine is manufactured by CRONOSSTECH in Turkey.

Κατάσταση: καινούργιο, Έτος κατασκευής: 2025, δύναμη συμπίεσης: 250 t, πλάτος τραπεζιού: 1.000 χιλ., μήκος τραπεζιού: 1.200 χιλ., διαδρομή: 600 χιλ., λειτουργική πίεση: 250 δοκός, Εξοπλισμός: τεκμηρίωση / εγχειρίδιο, φωτοηλεκτρικός φράκτης ασφαλείας, CRONOSSTECH CHP 250 H-Type Single-Acting Hydraulic Press – 8 Rail-Guided General Description The CRONOSSTECH CHP series H-type single-acting hydraulic presses are heavy-duty industrial solutions, engineered for sheet metal forming, straightening, assembly, and die press applications. The 8-rail H-frame construction ensures force distribution is balanced during pressing, providing stable and repeatable operational characteristics. The CHP 250 model is designed for medium to high-tonnage manufacturing processes, delivering long-lasting and reliable performance. CHP Series – Structural Features CHP series presses are designed for heavy-duty industrial conditions. The frame and load-bearing components are stress-relieved by vibration. The Bronze Zr14 slide bearings ensure consistently precise ram guidance and maintain long-term accuracy by distributing the load evenly during ram movements. ⚙️ Standard Equipment - Steel construction, 8-rail H-type press frame - Stress-relieved frame and load-bearing parts via vibration - Bronze Zr14 slide bearings - WPQR & WPS certified welding, approved by TÜRK-AK (EN ISO 15614-1:2017 / EN ISO 14731) - Machine designed and manufactured in compliance with CE standards - PLC-controlled hydraulic system - 7” DELTA touch panel display - Adjustable ram stroke and tonnage control - Automatic lubrication system - Electronically monitored filter contamination warning - Hydraulic unit oil temperature and system status monitorable via display - Cooling system - Off-line filtration - Two-hand control system - Light curtain (standard operator safety) - SIEMENS – SCHNEIDER switchgear components 📐 Technical Specifications – CHP 250 Type: Steel construction, 8-rail H-frame press Main Frame Material: St52 – ERDEMİR Slide Bearing: Bronze Zr14 Capacity (Ram): 250 Ton Movable Table Size: 1000 × 1200 mm Fixed Table Size: 1000 × 1200 mm Parallelism Tolerance: 120 micron/m Gtodpfx Aex N T Eleatot Perpendicularity Tolerance: 60 micron/m Ram Stroke: 600 mm Min. Daylight: 100 mm Max. Daylight: 700 mm Weld Stress Relief: Vibratory method Weld Application: WPQR and WPS certified (TÜRK-AK accredited, EN ISO 15614-1:2017; supervised by certified welding coordinators under EN ISO 14731) Max. Working Pressure: 250 Bar Total Motor Power: 37 kW – IE3 Main Pump: 45 cm³ – REXROTH or PARKER Movable Table Fast Approach Speed: 150 mm/s Movable Table Pressing Speed: 12 mm/s Movable Table Return Speed: 170 mm/s Main Cylinder Bore: Ø360 mm – Ck45 Auxiliary Acceleration Cylinders: 2 units Approximate Height: 4200 mm Approximate Width: 3250 mm Approximate Depth: 2200 mm Table Height from Floor: 1350 mm Pre-fill Valve: NG 125 Hydraulic Unit: REXROTH or PARKER Cooling System: EMMEGI – CIESSE – PARKER Off-line Filtration: REXROTH or PARKER Linear Position Transducer: NOVATECHNIK or TURCK PLC Control: DELTA Touch Panel Display: DELTA 7” Switchgear Components: SIEMENS – SCHNEIDER Approximate Weight: 9.5 Tons Production Note This machine is manufactured by CRONOSSTECH in Turkey.

Κατάσταση: καινούργιο, Έτος κατασκευής: 2025, δύναμη συμπίεσης: 200 t, πλάτος τραπεζιού: 800 χιλ., μήκος τραπεζιού: 1.000 χιλ., διαδρομή: 600 χιλ., λειτουργική πίεση: 250 δοκός, Εξοπλισμός: τεκμηρίωση / εγχειρίδιο, φωτοηλεκτρικός φράκτης ασφαλείας, CRONOSSTECH CHP 200 H-Type Single-Acting Hydraulic Press – 8-Guided Slides General Description The CRONOSSTECH CHP series H-type single-acting hydraulic presses are industrial press solutions with high rigidity, designed for sheet metal forming, straightening, assembly, and die pressing applications. Thanks to their 8-slide H-frame structure, forces generated during pressing are distributed evenly, ensuring stable and repeatable operation. The CHP 200 model is designed for reliable performance and long service life in medium-to-high tonnage applications. CHP Series – Structural Features CHP series presses are engineered for heavy-duty operating conditions. The frame and supporting parts are stress-relieved by vibration methods. The bronze Zr14 slide bearing system ensures smooth ram movement and long-term precision. ⚙️ Standard Equipment - Steel construction, H-type press frame with 8 slides - Frame and supporting components stress-relieved by vibration - Bronze Zr14 slide bearings - WPQR & WPS certified welding by TÜRK-AK accreditation (EN ISO 15614-1:2017 / EN ISO 14731) - Machine structure designed and manufactured to CE standards - PLC-controlled hydraulic system - 7” DELTA touchscreen panel - Adjustable ram stroke and tonnage control - Automatic lubrication system - Electronically controlled filter contamination warning - Monitoring hydraulic unit oil temperature and system status on the display - Cooling system - Off-line filtration - Two-hand control system - Light curtain (standard for operator safety) - SIEMENS – SCHNEIDER switchgear 📐 Technical Specifications – CHP 200 Type: Steel construction, H-frame with 8 slides Frame Material: St52 – ERDEMİR Slide Bearings: Bronze Zr14 Capacity (Ram): 200 tons Movable Table Dimensions: 800 × 1000 mm Fixed Table Dimensions: 800 × 1000 mm Parallelism Tolerance: 120 micron/meter Perpendicularity Tolerance: 60 micron/meter Stroke (Ram): 600 mm Min. Daylight Opening: 100 mm Max. Daylight Opening: 700 mm Stress Relief: Vibratory stress relief Welding: WPQR & WPS certified by TÜRK-AK, in accordance with EN ISO 15614-1:2017, supervised by certified welding coordination engineers to EN ISO 14731 Max. Working Pressure: 250 Bar Total Motor Power: 22 kW – IE3 Main Pump: 32 cm³ – REXROTH or PARKER Movable Table Rapid Descent Speed: 150 mm/sec Movable Table Pressing Speed: 12 mm/sec Movable Table Return Speed: 170 mm/sec Main Cylinder Bore: Ø320 mm – Ck45 Auxiliary Acceleration Cylinders: 2 units Approx. Press Height: 3800 mm Approx. Press Width: 2950 mm Approx. Press Depth: 2200 mm Lower Table Height from Floor: 1350 mm Pre-fill Valve: NG 125 Hydraulic Unit: REXROTH or PARKER Cooling System: EMMEGI – CIESSE – PARKER Gtsdpfxex N T D Uj Aatot Off-line Filtration: REXROTH or PARKER Linear Distance Scale: NOVATECHNIK or TURCK PLC: DELTA Touchscreen Panel: DELTA 7” Switchgear: SIEMENS – SCHNEIDER Approximate Weight: 8 tons Production Note This machine is manufactured in Turkey by CRONOSSTECH.