Μεταχειρισμένο Cembre B35-50D – Υδραυλικη Πρεσα Μπαταριας προς πώληση (19.220)

Κατάσταση: πολύ καλή (μεταχειρισμένο), Προσφέρω επαγγελματική υδραυλική πρέσα με μπαταρία CEMBRE B35-50D – εργαλείο υψηλής ποιότητας για βιομηχανικές εφαρμογές. Η συσκευή βρίσκεται σε πολύ καλή τεχνική κατάσταση, λειτουργεί άψογα και είναι έτοιμη για χρήση. ⚙️ Τεχνικά χαρακτηριστικά: Μοντέλο: CEMBRE B35-50D Δύναμη πίεσης: 35 kN (4 τόνοι) Μέγιστη διατομή καλωδίου: έως 150 mm² (χαλκός) Τροφοδοσία: Μπαταρία 9.6V Ni-MH Περιστρεφόμενη κεφαλή: 180° Τύπος: Υδραυλική, επαναφορτιζόμενη Χειρισμός: με το ένα χέρι ✅ Εφαρμογές: τερματικά καλωδίων (πατούρες) συνδέσεις καλωδίων Ηλεκτρικές εγκαταστάσεις χαμηλής τάσης / βιομηχανικές σέρβις και συντήρηση εγκαταστάσεων 📦 Περιλαμβάνονται: πρέσα CEMBRE B35-50D 2x μπαταρίες φορτιστής βαλίτσα μεταφοράς τεκμηρίωση / οδηγίες χρήσης ιμάντας ⭐ Πλεονεκτήματα: Πολύ στιβαρή βιομηχανική κατασκευή Αθόρυβη λειτουργία και ελάχιστοι κραδασμοί Αυτόματη επαναφορά μετά την πρέσα Υψηλή ακρίβεια και επαναληψιμότητα Άνετη λειτουργία με το ένα χέρι Bdodpfoy H Ri Asx Aatec 📌 Κατάσταση: Μεταχειρισμένο – δείχνει κανονικές ενδείξεις χρήσης, πλήρως λειτουργικό τεχνικά.

Κατάσταση: πολύ καλή (μεταχειρισμένο), Υψηλής ποιότητας υδραυλικό εργαλείο από τον καταξιωμένο κατασκευαστή CEMBRE. Η συσκευή προσφέρει μεγάλη δύναμη σύσφιξης και άνετη εργασία χάρη στην τροφοδοσία με μπαταρία. Στιβαρή κατασκευή και αξιοπιστία – εξοπλισμός που χρησιμοποιείται σε επαγγελματικές εφαρμογές. 📊 Τεχνικά δεδομένα: Κατασκευαστής: CEMBRE Μοντέλο: B35-50D Δύναμη πίεσης: 35 kN (περίπου 4 τόνοι) Μέγιστη διατομή: έως 150 mm² (Cu) Bdjdpfsy H Rdgjx Aatoc Τροφοδοσία: μπαταρίας Έτος κατασκευής: 2010 📦 Περιλαμβάνονται: πιεστήρας CEMBRE μπαταρία φορτιστής βαλίτσα μεταφοράς τεκμηρίωση πρόσθετα εξαρτήματα όπως φαίνονται στις φωτογραφίες 📦 Κατάσταση: Πολύ καλή τεχνική κατάσταση Πλήρως λειτουργικό Κανονικά ίχνη χρήσης Έτοιμο για χρήση

Κατάσταση: πολύ καλή (μεταχειρισμένο), Πωλούνται επαγγελματικές υδραυλικές πρεσαρίστρες μπαταρίας της μάρκας Cembre, μοντέλο B15D. Οι συσκευές είναι πλήρως λειτουργικές και έτοιμες για εργασία. Η τιμή αφορά ένα τεμάχιο. Η οπτική κατάσταση φαίνεται στις φωτογραφίες – φυσιολογικά ίχνη χρήσης από την εκμετάλλευση. Τεχνικά χαρακτηριστικά: Κατασκευαστής: Cembre Μοντέλο: B15D Δύναμη πρεσαρίσματος: 15 kN Τροφοδοσία: 9,6V / 2,0Ah Ni-MH Επαγγελματική συσκευή για πρεσαρίσματα ακροδεκτών και συνδέσμων Συμπαγής και ανθεκτική κατασκευή Επιπλέον πληροφορίες: Οι μπαταρίες έχουν ανακατασκευαστεί – 05.2026 Δεν περιλαμβάνεται φορτιστής Οι πρεσαρίστρες είναι 100% λειτουργικές Πωλούνται μεμονωμένα Το σετ περιλαμβάνει: Bdedpfxsy Uzcvo Aatsc Πρεσαρίστρα Cembre B15D Μπαταρία

Κατάσταση: πολύ καλή (μεταχειρισμένο), Πωλείται επαγγελματική υδραυλική πρέσα μπαταρίας της μάρκας Cembre, μοντέλο B15MD. Η συσκευή είναι πλήρως λειτουργική, έτοιμη για χρήση. Πώληση χωρίς μπαταρία και φορτιστή. Η οπτική κατάσταση είναι πολύ καλή, κανονικά ίχνη χρήσης φαίνονται στις φωτογραφίες. Στο σετ περιλαμβάνεται η αυθεντική θήκη μεταφοράς Cembre και τα εξαρτήματα που φαίνονται στις φωτογραφίες. Τεχνικά χαρακτηριστικά: Κατασκευαστής: Cembre Μοντέλο: B15MD Δύναμη σύσφιξης: 15 kN Τροφοδοσία: μπαταρία 18V Προέλευση: Κατασκευή στην Ιταλία Συμπαγής και ελαφριά κατασκευή Επαγγελματική συσκευή για πρεσάρισμα ακροδεκτών και συνδέσμων Το σετ περιλαμβάνει: Bdedjy Uy Nhjpfx Aatec Πρέσα Cembre B15MD Αυθεντική θήκη μεταφοράς Αξεσουάρ όπως φαίνονται στις φωτογραφίες ΠΡΟΣΟΧΗ: Πώληση χωρίς μπαταρία και φορτιστή. Η συσκευή έχει ελεγχθεί – λειτουργεί 100%.

Κατάσταση: έτοιμο προς χρήση (μεταχειρισμένο), Έτος κατασκευής: 1983, ώρες λειτουργίας: 50.000 h, Λειτουργικότητα: πλήρως λειτουργικό, λειτουργική πίεση: 200 δοκός, συνολικό βάρος: 33.000 κιλ, δύναμη συμπίεσης: 1.000 t, διαδρομή: 650 χιλ., μέγ. ταχύτητα κίνησης: 3.600 mm/min, ΤΕΧΝΙΚΕΣ ΛΕΠΤΟΜΕΡΕΙΕΣ Δύναμη Πίεσης: 1.000 t Δύναμη Πίεσης Πυρήνων Πλακών: 30 t Ταχύτητα Διαδρομής: περ. 60 mm/s Λειτουργική Πίεση: 200 bar Διαδρομή Κινούμενης Πλάκας: 650 mm Διαδρομή Πλάκας Στήριξης Καλουπιού προς τον χειριστή: 980 mm Πλάκες Θέρμανσης και Σύστημα Θέρμανσης Διαστάσεις Πλάκας Θέρμανσης: 1.000 mm x 1.000 mm Αριθμός Πλακών Θέρμανσης: 7 Αριθμός Ανοιγμάτων: 6 Διαστάσεις ανά Άνοιγμα: περ. 108 mm Ειδική Πίεση στις Πλάκες: 100 kg/cm² Υδραυλικό Σύστημα και Μονάδες Ισχύς Υδραυλικής Αντλίας: 9 kW Ισχύς Αντλίας Δυναμικής Λαδιού: 11 kW Εγκατεστημένη Ηλεκτρική Ισχύς: 21,5 kW Ποσότητα Υδραυλικού Λαδιού: περ. 160 l Bdjdpfey Hhqdox Aatec Εργαζόμενα Υγρά Ποσότητα Υδραυλικού Ρευστού (γαλακτωματοποιημένο με νερό και 5% λάδι CIL-SOLIOIL-BK): περ. 1.300 l Φιάλες Αζώτου 60 l στα 200 atm για προφόρτιση συσσωρευτή: περ. 10 ΛΕΠΤΟΜΕΡΕΙΕΣ ΜΗΧΑΝΗΜΑΤΟΣ Βάρη Βάρος Πρέσας: 33 t Βάρος Μονάδας Λαδιού: 0,4 t Βάρος Αντλίας και Συσσωρευτή: 1,9 t Βάρος Μονάδας Ηλεκτρολογικού: 0,2 t Συνολικό Βάρος Παράδοσης: 35,5 t ΕΞΟΠΛΙΣΜΟΣ Σύστημα Θέρμανσης με Κορεσμένο Ατμό Ηλεκτροϋδραυλική διάταξη ρύθμισης ισχύος Ηλεκτροβαλβίδα εξαέρωσης

Κατάσταση: καινούργιο, Έτος κατασκευής: 2025, ισχύς: 22 kW (29,91 ίππους), διαδρομή: 310 χιλ., ταχύτητα λειτουργίας: 10 mm/s, ταχύτητα όπισθεν: 110 mm/s, ύψος τραπεζιού: 955 χιλ., βάθος λαιμού: 410 χιλ., πλάτος εργασίας: 3.100 χιλ., μέγ. δύναμη κάμψης: 320 t, απόσταση μεταξύ των στηριγμάτων: 2.600 χιλ., τύπος ελέγχου: CNC έλεγχος, ρύθμιση πίσω στοπ: ελεγχόμενο με CNC, αριθμός αξόνων: 4, τύπος στεφάνωσης: κινητήριος, τύπος ενεργοποίησης: υδραυλικός, Τυπικά χαρακτηριστικά • 4 άξονες CNC Y1, Y2, X, R (X+R Servo) • Διαδρομή 410 mm, βάθος λαιμού 510 mm • CNC μονάδα ελέγχου ESA S650 • Πίσω stop με σερβοκινητήρες, ακρίβεια ±0,03 mm, X=750 mm, R=250 mm • Ευρωπαϊκού τύπου ταχείας αλλαγής καλουπιού Promekam • Σύστημα μπροστινής στήριξης με ολίσθηση • Χειροκίνητο σύστημα αντιστρέβλωσης (πρωτότυπο WILA με καμάρα) • Στενό κάτω τραπέζι (ευρωπαϊκού τύπου) • Γραμμικά καντράν GIVI • Τυπική άνω μήτρα (Ύψος: 67, 850 R:08) • Τυπική κάτω μήτρα (60x60 mm, 4 κανάλια V=16-22-35-50 mm, 850 Ύψος:60) • Φωτισμός LED Προαιρετικός εξοπλισμός • Πίσω stop από X+R με επιλογές 4-6-8 αξόνων • ROLLERI Roll200 υδραυλικό σύστημα δεσίματος καλουπιού • Υδραυλικό σύστημα άνω και κάτω καλουπιού WILA • Φαρδύ κάτω τραπέζι για πολυκάναλο καλούπι • Απόσταση X πίσω stop 1000 mm • Μπροστινό σύστημα ασφαλείας με δέσμη λέιζερ AKAS ή DSP • Πρόσθετα δάχτυλα πίσω stop • Πρόσθετες γλώσσες πίσω stop ΤΕΧΝΙΚΑ ΧΑΡΑΚΤΗΡΙΣΤΙΚΑ ΤΙΜΗ Δύναμη κάμψης (Ton) 320 Μήκος κάμψης (mm) 3100 Απόσταση μεταξύ των πλαϊνών τοιχωμάτων (mm) 2600 Διαδρομή (mm) 310 Άνοιγμα άνω-κάτω σιαγόνας (mm) 535 Βάθος λαιμού (mm) 410 Ύψος τραπεζιού (mm) 955 Ταχύτητα καθόδου (mm/sec) 150 Ταχύτητα επιστροφής (mm/sec) 110 Ταχύτητα πίεσης (mm/sec) 10 Bdjdpfx Aex Nn Eaoatoc Δεξαμενή λαδιού (Lt) 290 Βάρος μηχανήματος (kg) 14.700 Κύριος κινητήρας (kW) 22 CNC control unit ESA S640 Αριθμός αξόνων CNC Y1-Y2-X-R (4 άξονες) Πίσω stop X (mm) 750 Πίσω stop R (mm) 250 Αντιστρέβλωση Χειροκίνητη (με καμάρα WILA) Σύστημα ασφάλειας Μπροστινό σύστημα ασφαλείας με λέιζερ Προέλευση Τουρκία

Κατάσταση: καινούργιο, Έτος κατασκευής: 2025, δύναμη συμπίεσης: 500 t, διαδρομή: 1.000 χιλ., πλάτος τραπεζιού: 1.200 χιλ., μήκος τραπεζιού: 1.500 χιλ., λειτουργική πίεση: 250 δοκός, Εξοπλισμός: τεκμηρίωση / εγχειρίδιο, φωτοηλεκτρικός φράκτης ασφαλείας, CRONOSSTECH CHP 500 H-Type Single-Acting Hydraulic Press – 8 Guided Sliders General Description The CRONOSSTECH CHP series H-type single-acting hydraulic presses are robust industrial press solutions developed for sheet metal forming, straightening, assembly, and die pressing applications. The 8-slider H-frame structure ensures stable and repeatable operation by providing balanced distribution of high loads during pressing. The CHP 500 model is designed for heavy-duty production processes that demand high tonnage, targeting long-lasting and reliable performance. CHP Series – Structural Features CHP series presses are designed specifically for demanding, heavy-duty operation. The frame and load-bearing components are stress-relieved by vibratory methods. Bronze Zr14 slider bushings ensure even load distribution along the ram stroke, maintaining long-term precision. ⚙️ Standard Equipment - Steel construction, H-type frame with 8 guided sliders - Vibratory stress-relieved frame and load-bearing parts - Bronze Zr14 slider bushings - WPQR & WPS certified and TÜRK-AK accredited welding applications (EN ISO 15614-1:2017 / EN ISO 14731) - Machine structure designed and manufactured according to CE standards - PLC-controlled hydraulic system - DELTA 7” touch screen - Adjustable ram stroke and tonnage control - Automatic lubrication system - Electronic filter contamination alert - Monitoring of hydraulic unit oil temperature and system status via screen - Cooling system - Off-line filtration - Two-hand control system - Light barrier (standard for operator safety) - SIEMENS – SCHNEIDER control components 📐 Technical Specifications – CHP 500 Type: Steel construction, H-type frame with 8 guided sliders Frame Material: St52 – ERDEMİR Slider Bushings: Bronze Zr14 Capacity (Ram): 500 Tons Moving Table Dimensions: 1200 × 1500 mm Fixed Table Dimensions: 1200 × 1500 mm Parallelism Tolerance: 120 micron/meter Perpendicularity Tolerance: 60 micron/meter Ram Stroke: 1000 mm Min. Daylight Opening: 100 mm Max. Daylight Opening: 1100 mm Stress Relief: Vibratory method ding Welding Application: WPQR & WPS certified by TÜRK-AK, holds EN ISO 15614-1/2017 welding certificate (inspected by certified welding coordination engineers according to EN ISO 14731) Max. Working Pressure: 250 Bar Total Motor Power: 45 kW – IE3 Main Pump: 70 cm³ – REXROTH or PARKER Rapid Descent Speed (Moving Table): 150 mm/sec Drawing Speed (Moving Table): 12 mm/sec Return Speed (Moving Table): 170 mm/sec Main Cylinder Inner Diameter: Ø500 mm – Ck45 Auxiliary Acceleration Cylinders: 2 units Approx. Press Height: 5800 mm Approx. Press Width: 3250 mm Approx. Press Depth: 2200 mm Bottom Table Height from Floor: 1400 mm Pre-fill Valve: NG 150 Hydraulic Power Unit: REXROTH or PARKER Bdodpfxex N T H Ae Aatec Cooling System: EMMEGI – CIESSE – PARKER Off-line Filtration: REXROTH or PARKER Linear Distance Scale: NOVATECHNIK or TURCK PLC: DELTA Touch Panel: DELTA 7” Control Components: SIEMENS – SCHNEIDER Approximate Weight: 23 Tons Production Note This machine is manufactured by CRONOSSTECH in Turkey.

Κατάσταση: καινούργιο, Έτος κατασκευής: 2025, δύναμη συμπίεσης: 1.000 t, διαδρομή: 1.000 χιλ., πλάτος τραπεζιού: 1.500 χιλ., μήκος τραπεζιού: 2.000 χιλ., λειτουργική πίεση: 250 δοκός, Εξοπλισμός: τεκμηρίωση / εγχειρίδιο, φωτοηλεκτρικός φράκτης ασφαλείας, CRONOSSTECH CHP 1000 H-Type Single-Acting Hydraulic Press – 8 Guide Rails General Description The CRONOSSTECH CHP series H-type single-acting hydraulic presses are designed for sheet metal forming, deep drawing, straightening, and heavy-duty pressing applications that require high tonnage. The H-frame structure with 8 guide rails ensures even distribution of high forces generated during pressing operations, providing maximum rigidity, precision, and long service life. The CHP 1000 model is engineered to deliver reliable and stable performance for heavy industrial production lines. CHP Series – Structural Features CHP series presses are engineered with heavy industry requirements in mind. The frame and main load-bearing structures are stress-relieved using vibration techniques. Bronze Zr14 guide bushings ensure smooth load distribution and high precision throughout the ram movement. ⚙️ Standard Equipment - Steel construction, 8-guide-rail H-type press frame - Stress-relieved frame structure by vibration - Bronze Zr14 guide bushings - Turkiye Accreditation Agency (TÜRK-AK) accredited WPQR & WPS certified welding (EN ISO 15614-1:2017 / EN ISO 14731) - Design and manufacturing in accordance with CE standards - PLC-controlled hydraulic system - Touch panel display (DELTA 7”) - Adjustable ram stroke and tonnage control - Automatic lubrication system - Electronic filter contamination warning - Real-time monitoring of hydraulic oil temperature and system status - Cooling system - Off-line filtration Bdodsx N T Rbjpfx Aatoc - Dual-hand control system - Light barrier (standard for operator safety) - SIEMENS – SCHNEIDER switching components 📐 Technical Specifications – CHP 1000 Type: Steel construction, 8-guide-rail H-frame press Frame Material: St52 – ERDEMIR Guide Bushings: Bronze Zr14 Capacity (Ram): 1000 Ton Movable Table Dimensions: 1500 × 2000 mm Fixed Table Dimensions: 1500 × 2000 mm Parallelism Tolerance: 120 micron/m Perpendicularity Tolerance: 60 micron/m Stroke (Ram): 1000 mm Min. Daylight: 100 mm Max. Daylight: 1100 mm Stress Relief: Vibration stress relief Welding Certification: EN ISO 15614-1/2017, WPQR and WPS certified by TÜRK-AK Max. Operating Pressure: 250 Bar Total Motor Power: 75 kW – IE3 Main Pump: 70 cm³ – REXROTH or PARKER Movable Table Fast Descent Speed: 150 mm/s Movable Table Pressing Speed: 12 mm/s Movable Table Return Speed: 170 mm/s Main Cylinder Inner Diameter: Ø500 mm – Ck45 (2 pcs) Auxiliary Acceleration Cylinders: 2 pcs Approximate Height: 6000 mm Approximate Width: 3450 mm Approximate Depth: 2400 mm Lower Table Height from Ground: 1450 mm Main Pre-Fill Valve: NG 200 Hydraulic Unit: REXROTH or PARKER Cooling System: EMMEGI – CIESSE – PARKER Off-line Filtration: REXROTH or PARKER Linear Scale: NOVATECHNIK or TURCK PLC Application: DELTA Touch Display: DELTA 7” Switching Components: SIEMENS – SCHNEIDER Approximate Weight: 55 Tons Production Note This machine is manufactured by CRONOSSTECH in Turkey.

Κατάσταση: καινούργιο, Έτος κατασκευής: 2025, δύναμη συμπίεσης: 1.200 t, διαδρομή: 1.000 χιλ., πλάτος τραπεζιού: 1.500 χιλ., μήκος τραπεζιού: 2.000 χιλ., λειτουργική πίεση: 250 δοκός, Εξοπλισμός: τεκμηρίωση / εγχειρίδιο, φωτοηλεκτρικός φράκτης ασφαλείας, CRONOSSTECH CHP 1200 H-Type Hydraulic Deep Drawing Press – 8-Guided Slides General Description The CRONOSSTECH CHP series H-type hydraulic deep drawing presses are specifically designed for deep drawing, forming, shaping, and heavy-duty pressing applications. Thanks to its 8-guided H-frame structure, it provides maximum rigidity, stability, and precision under high tonnage. The CHP 1200 model offers reliable and long-lasting performance for industrial production lines requiring high force. The frame structure is stress relieved using vibrational methods, ensuring that the loads generated during pressing are evenly distributed, maintaining parallelism and perpendicularity tolerances. ⚙️ Standard Equipment - Steel construction, 8-guided H-frame press type Bodpfx Aaex N T Rustjdc - Stress-relieved frame structure via vibration - Zr14 bronze slide bearings - WPQR and WPS approved welding operations accredited by TÜRK-AK (EN ISO 15614-1:2017 / EN ISO 14731) - Design and manufacturing in compliance with CE standards - PLC-controlled hydraulic system - 7’’ DELTA touchscreen control panel - Adjustable ram stroke and tonnage control - Automatic lubrication system - Electronic filter contamination warning - Visualization of hydraulic oil temperature and system status on the screen - Cooling system - Off-line filtration - Safety systems for operator protection - SIEMENS – SCHNEIDER electrical components 📐 Technical Specifications – CHP 1200 - Type: Steel construction, 8-guided H-frame press type - Frame Material: St52 – ERDEMİR - Slide Bearings: Zr14 Bronze - Capacity (Ram): 1200 Ton - Moving Table Dimensions: 1500 × 2000 mm - Fixed Table Dimensions: 1500 × 2000 mm - Parallelism Tolerance: 120 micron/m - Perpendicularity Tolerance: 60 micron/m - Stroke (Ram): 1000 mm - Min. Daylight: 100 mm - Max. Daylight: 1100 mm - Stress Relieving: Through vibration - Welding Application: TÜRK-AK accredited, WPQR & WPS certified, EN ISO 15614-1/2017 - Max. Working Pressure: 250 Bar - Total Motor Power: 75 kW – IE3 - Main Pump: 70 cm³ – REXROTH or PARKER - Fast Down Speed (Moving Table): 150 mm/s - Drawing Speed (Moving Table): 12 mm/s - Return Speed (Moving Table): 170 mm/s - Main Cylinder Bore: Ø560 mm – Ck45 (2 units) - Auxiliary Acceleration Cylinders: 2 units - Approx. Press Height: 6100 mm - Approx. Press Width: 3550 mm - Approx. Press Depth: 2400 mm - Lower Table Height (from floor): 1450 mm - Pre-fill Valve: NG 200 - Hydraulic Unit: REXROTH or PARKER - Cooling System: EMMEGI – CIESSE – PARKER - Off-line Filtration: REXROTH or PARKER - Linear Measurement Scale: NOVATECHNIK or TURCK - PLC Application: DELTA - Touch Panel Display: DELTA 7” - Switchgear Components: SIEMENS – SCHNEIDER - Approximate Weight: 60 Ton Production Note This machine is manufactured by CRONOSSTECH in Turkey.

Κατάσταση: καινούργιο, Έτος κατασκευής: 2025, δύναμη συμπίεσης: 2.500 t, διαδρομή: 1.000 χιλ., πλάτος τραπεζιού: 1.800 χιλ., μήκος τραπεζιού: 2.600 χιλ., λειτουργική πίεση: 250 δοκός, Εξοπλισμός: τεκμηρίωση / εγχειρίδιο, φωτοηλεκτρικός φράκτης ασφαλείας, CRONOSSTECH CHP 2500 H-Type Hydraulic Press – 8 Sliding Guides General Description The CRONOSSTECH CHP series H-type hydraulic presses are engineered for heavy-duty forming, deep drawing, and embossing operations requiring very high tonnage. The 8-slide H-frame structure ensures maximum rigidity during the pressing process; parallelism and perpendicularity tolerances are reliably maintained throughout the long stroke. The CHP 2500 model, with its large bed dimensions, multi-cylinder main pressing system and high-capacity hydraulic unit, is designed for automotive, heavy industry, defense industry, and high-tonnage die applications. The frame is stress-relieved by vibration to ensure long service life and reliable operation. ⚙️ Standard Equipment - Steel construction, 8-slide H-frame press body - Stress-relieved frame structure by vibration - Bronze Zr14 slide bearings - Welding applications certified with TÜRK-AK accredited WPQR and WPS (EN ISO 15614-1:2017 / EN ISO 14731) - Design and manufacturing comply with CE standards - PLC-controlled hydraulic system - Touch panel display (DELTA 7”) - Adjustable ram stroke and tonnage control - Automatic lubrication system - Electronic filter contamination monitoring - On-screen monitoring of hydraulic oil temperature and system status - Cooling system - Off-line filtration - Safety systems for operator protection - SIEMENS – SCHNEIDER electrical components 📐 Technical Specifications – CHP 2500 Type: Steel construction, 8-slide H-frame press body Frame Material: St52 – ERDEMİR Slide Bearings: Bronze Zr14 Capacity (Ram): 2500 Tons Movable Table Size: 1800 × 2600 mm Fixed Table Size: 1800 × 2600 mm Parallelism Tolerance: 120 micron/m Perpendicularity Tolerance: 60 micron/m Stroke (Ram): 1000 mm Min. Daylight: 200 mm Max. Daylight: 1200 mm Stress Relief: Vibration stress relief Bdedpfx Aaox N T S Eetoc Welding Application: TÜRK-AK accredited WPQR & WPS, EN ISO 15614-1/2017 Max. Operating Pressure: 250 Bar Total Motor Power: 180 kW – IE3 Main Pump: 140 cm³ – REXROTH or PARKER Movable Table Fast Down Speed: 150 mm/s Movable Table Forming Speed: 12 mm/s Movable Table Return Speed: 170 mm/s Main Cylinder Inner Diameter: Ø565 mm – Ck45 (4 units) Auxiliary Acceleration Cylinders: 2 units Approx. Height of Press: 6500 mm Approx. Width of Press: 3950 mm Approx. Depth of Press: 2600 mm Bottom Table Height from Floor: 1500 mm Pre-fill Valve: NG 200 Hydraulic Unit: REXROTH or PARKER Cooling System: EMMEGI – CIESSE – PARKER Off-line Filtration: REXROTH or PARKER Linear Scale: NOVATECHNIK or TURCK PLC Application: DELTA Touch Panel Display: DELTA 7” Switchgear Components: SIEMENS – SCHNEIDER Approximate Weight: 120 Tons Production Note This machine is manufactured by CRONOSSTECH in Turkey.

Κατάσταση: καινούργιο, Έτος κατασκευής: 2025, δύναμη συμπίεσης: 100 t, διαδρομή: 600 χιλ., πλάτος τραπεζιού: 1.000 χιλ., μήκος τραπεζιού: 1.200 χιλ., δύναμη επαναφοράς: 40 t, λειτουργική πίεση: 250 δοκός, Εξοπλισμός: τεκμηρίωση / εγχειρίδιο, φωτοηλεκτρικός φράκτης ασφαλείας, CRONOSSTECH CHSP 100/40 H-Type Hydraulic Deep Drawing (Hydroforming) Press – 8 Guideways General Description The CRONOSSTECH CHSP series H-type hydraulic deep drawing presses are designed with a double-acting operation principle to provide controlled material flow for sheet metal forming, deep drawing, and hydroforming applications. The 8-guideway H-frame construction ensures maximum rigidity during pressing; parallelism and perpendicularity tolerances are stably maintained throughout the stroke. The CHSP 100/40 model features a 100-ton main ram and a 40-ton blank holder (cushion) capacity, specifically engineered for precise deep drawing and hydroforming operations. The frame is stress-relieved via vibration, ensuring a long service life and reliable operation. ⚙️ Standard Equipment - Steel construction, 8-guideway H-frame body - Stress-relieved frame structure via vibration - Bronze Zr14 guide bushings - WPQR and WPS approved welding by TÜRK-AK accredited applications (EN ISO 15614-1:2017 / EN ISO 14731) - Design and manufacturing compliant with CE standards - PLC-controlled hydraulic system - Touchscreen control panel (DELTA 7”) - Adjustable ram and cushion stroke control - Adjustable ram and cushion tonnage (pressure) control - Automatic lubrication system - Electronically monitored filter contamination warning - Hydraulic unit oil temperature and system status displayed on-screen - Cooling system - Off-line filtration - Safety systems for operator protection - SIEMENS – SCHNEIDER switchgear components 📐 Technical Specifications – CHSP 100/40 Type: Steel construction, 8-guideway H-frame body Frame Material: St52 – ERDEMİR Guide Bushings: Bronze Zr14 Capacity (Ram): 100 Ton Capacity (Cushion): 40 Ton Moving Table Size: 1000 × 1200 mm Fixed Table Size: 1000 × 1200 mm Parallelism Tolerance: 120 micron/m Perpendicularity Tolerance: 60 micron/m Stroke (Ram): 600 mm Stroke (Cushion): 200 mm Min. Daylight: 100 mm Max. Daylight: 700 mm Weld Stress Relief: Vibration stress relief Welding Applications: WPQR and WPS approval by TÜRK-AK accredited certifier EN ISO 15614-1/2017 (Supervised by certified welding coordination engineers per EN ISO 14731) Max. Working Pressure: 250 Bar Total Motor Power: 11 kW – IE3 Main Pump: 22 cm³ – REXROTH or PARKER Moving Table Fast Down Speed: 150 mm/sec Moving Table Hydroforming Speed: 12 mm/sec Moving Table Return Speed: 170 mm/sec Cushion Table Advancing Speed: 30 mm/sec Main Cylinder Bore: Ø230 mm – Ck45 Cushion Cylinder Bore: Ø140 mm – Ck45 Auxiliary Acceleration Cylinders: 2 units Bsdex N T Uyjpfx Aatodc Approx. Press Height: 3400 mm Approx. Press Width: 2950 mm Approx. Press Depth: 2000 mm Lower Table Height from Floor: 1250 mm Pre-Fill Valve: NG 100 Hydraulic Power Unit: REXROTH or PARKER Cooling System: EMMEGI – CIESSE – PARKER Off-line Filtration: REXROTH or PARKER Linear Scale: NOVATECHNIK or TURCK PLC Application: DELTA Touchscreen Panel: DELTA 7” Switchgear: SIEMENS – SCHNEIDER Approximate Weight: 9 Tons Production Note This machine is manufactured by CRONOSSTECH in Turkey.

Κατάσταση: καινούργιο, Έτος κατασκευής: 2025, δύναμη συμπίεσης: 1.500 t, διαδρομή: 1.000 χιλ., πλάτος τραπεζιού: 1.500 χιλ., μήκος τραπεζιού: 2.400 χιλ., δύναμη επαναφοράς: 500 t, λειτουργική πίεση: 250 δοκός, Εξοπλισμός: τεκμηρίωση / εγχειρίδιο, φωτοηλεκτρικός φράκτης ασφαλείας, CRONOSSTECH CHSP 1500/500 H-Type Hydraulic Deep Drawing (Stamping) Press – 8-Guided Slides Bjdpfx Aaox N Ukijtodc General Description The CRONOSSTECH CHSP series H-type hydraulic deep drawing presses are designed to provide maximum frame rigidity, precise parallelism, and long service life for deep drawing applications requiring very high tonnage and large table dimensions. Thanks to its 8-guided H-frame body structure, the press ram and table movements remain controlled and stable throughout the pressing process. The CHSP 1500/500 model, featuring a 1500-ton main ram and a 500-ton blank holder capacity, is specifically engineered for large-sized tooling, deep drawing, and precision-controlled forming operations. Its stress-relieved, welded-steel construction offers high strength and reliability under heavy industrial conditions. ⚙️ Standard Equipment • Welded steel, 8-slide H-frame body structure • Stress-relieved frame by vibration • Bronze Zr14 slide bushings • WPQR and WPS certified welding by TÜRK-AK accredited bodies (EN ISO 15614-1:2017 / EN ISO 14731) • PLC-controlled hydraulic system • 7” DELTA touch panel screen • Adjustable ram and blank holder stroke control • Adjustable ram and blank holder tonnage (pressure) control • Automatic lubrication system • Electronically monitored filter contamination alert • On-screen monitoring of hydraulic unit oil temperature and system status • Off-line filtration and industrial cooling system • SIEMENS – SCHNEIDER electrical components • Industrial-grade safety systems for operator protection 📐 Technical Specifications – CHSP 1500/500 Type: Welded steel construction, 8-slide H-frame body Frame Material: St52 – ERDEMİR Guide Bushings: Bronze Zr14 Capacity (Ram / Blank Holder): 1500 / 500 Ton Moving / Fixed Table Size: 1500 × 2400 mm Parallelism / Perpendicularity Accuracy: 120 / 60 micron/m Stroke (Ram / Blank Holder): 1000 / 350 mm Daylight Opening (Min / Max): 200 / 1200 mm Max. Working Pressure: 250 Bar Total Motor Power: 90 kW – IE3 Main Pump: 101 cm³ – REXROTH or PARKER Main Cylinder: Ø620 mm – Ck45 (2 units) Blank Holder Cylinder: Ø360 mm – Ck45 (2 units) Pre-fill Valve: NG 200 PLC / Control Panel: DELTA / DELTA 7” Approximate Weight: 87 Tons Production Note This machine is manufactured by CRONOSSTECH in Turkey.

Κατάσταση: καινούργιο, Έτος κατασκευής: 2025, ισχύς: 18,5 kW (25,15 ίππους), διαδρομή: 310 χιλ., ταχύτητα λειτουργίας: 10 mm/s, ταχύτητα όπισθεν: 140 mm/s, βάθος λαιμού: 410 χιλ., πλάτος εργασίας: 3.100 χιλ., μέγ. δύναμη κάμψης: 220 t, απόσταση μεταξύ των στηριγμάτων: 2.600 χιλ., τύπος ελέγχου: CNC έλεγχος, ρύθμιση πίσω στοπ: ελεγχόμενο με CNC, αριθμός αξόνων: 4, τύπος στεφάνωσης: κινητήριος, τύπος ενεργοποίησης: υδραυλικός, Standard Features • Y1, Y2, X, R 4-Axis CNC (X+R Servo) • 410 mm Stroke, 510 mm Throat Depth • ESA S650 CNC Control Unit • Servo motorized back gauge with ±0.03 mm accuracy, X=750 mm, R=250 mm • European type Promekam quick die clamping system • Sliding front support system • Manual crowning system (Original WILA wedges) • Narrow lower table (European type) • GIVI brand linear scales • Standard upper tool (H: 67, 850 R:08) • Standard lower tool (60x60 mm, 4-channel V=16-22-35-50 mm, 850 H:60) • LED lighting Optional Features • 4-6-8 axis back gauge options starting from X+R • ROLLERI Roll200 hydraulic die clamping • WILA hydraulic upper and lower die clamping • Wide lower table for multi-channel die • Rear gauge X travel 1000 mm • AKAS or DSP laser beam front safety system • Additional back gauge fingers • Additional back gauge tong TECHNICAL SPECIFICATIONS VALUE Bending Force (Ton) 220 Bending Length (mm) 3100 Bdodpfxsx Nnzbj Aatjc Distance Between Side Frames (mm) 2600 Stroke (mm) 310 Open Height (mm) 515 Throat Depth (mm) 410 Table Height (mm) 940 Approach Speed (mm/sec) 180 Return Speed (mm/sec) 140 Pressing Speed (mm/sec) 10 Oil Tank (Lt) 290 Machine Weight (kg) 11300 Main Motor (kW) 18.5 CNC Control Unit ESA S640 Number of CNC Axes Y1-Y2-X-R (4 Axes) Back Gauge X (mm) 750 Back Gauge R (mm) 250 Crowning Manual (WILA wedges) Safety System Laser front safety Origin Turkey

Κατάσταση: καινούργιο, Έτος κατασκευής: 2025, ισχύς: 15 kW (20,39 ίππους), διαδρομή: 310 χιλ., ταχύτητα λειτουργίας: 10 mm/s, ταχύτητα όπισθεν: 130 mm/s, ύψος τραπεζιού: 935 χιλ., βάθος λαιμού: 410 χιλ., πλάτος εργασίας: 3.100 χιλ., μέγ. δύναμη κάμψης: 175 t, απόσταση μεταξύ των στηριγμάτων: 2.600 χιλ., τύπος ελέγχου: CNC έλεγχος, ρύθμιση πίσω στοπ: ελεγχόμενο με CNC, αριθμός αξόνων: 4, τύπος στεφάνωσης: κινητήριος, τύπος ενεργοποίησης: υδραυλικός, Standard Features • Y1, Y2, X, R 4-Axis CNC (X+R Servo) • 410 mm Stroke, 510 mm Throat Depth • ESA S650 CNC Control Unit • Servo motor-driven backgauge with ±0.03 mm accuracy, X=750 mm, R=250 mm • European type Promekam quick die clamping system • Sliding front support system • Manual crowning system (Original WILA cam lock system) • Narrow lower table (European type) • GIVI brand linear scales • Standard upper punch (H: 67, 850 R:08) • Standard lower die (60x60 mm, 4-V channels V=16-22-35-50 mm, 850 H:60) • LED lighting Optional Features • 4-6-8 axis backgauge options starting from X+R • ROLLERI Roll200 hydraulic die clamping • WILA hydraulic upper and lower die clamping • Wide lower table for multi-groove dies Bjdex Nn U Uspfx Aatodc • Backgauge X travel up to 1000 mm • AKAS or DSP laser beam front safety system • Additional backgauge fingers • Additional backgauge supports TECHNICAL SPECIFICATIONS VALUE Press Force (Ton) 175 Bending Length (mm) 3100 Distance Between Side Frames (mm) 2600 Stroke (mm) 310 Open Height (Lower-Upper Beam Gap) (mm) 515 Throat Depth (mm) 410 Table Height (mm) 935 Approach Speed (mm/sec) 180 Return Speed (mm/sec) 130 Pressing Speed (mm/sec) 10 Oil Tank Capacity (Lt) 180 Machine Weight (kg) 9700 Main Motor (kW) 15 CNC Control Unit ESA S640 Number of CNC Axes Y1-Y2-X-R (4 Axes) Backgauge X (mm) 750 Backgauge R (mm) 250 Crowning Manual (WILA cam lock) Safety System Laser front safety Country of Origin Turkey

Κατάσταση: καινούργιο, Έτος κατασκευής: 2025, δύναμη συμπίεσης: 100 t, διαδρομή: 500 χιλ., πλάτος τραπεζιού: 800 χιλ., μήκος τραπεζιού: 1.000 χιλ., λειτουργική πίεση: 250 δοκός, Εξοπλισμός: τεκμηρίωση / εγχειρίδιο, φωτοηλεκτρικός φράκτης ασφαλείας, CRONOSSTECH CHP 100 H-Frame Single-Acting Hydraulic Press – 8 Guides General Description The CRONOSSTECH CHP series H-type single-acting hydraulic presses are industrial presses with a rigid steel construction, designed for sheet metal forming, straightening, assembly, and die pressing applications. Thanks to its 8-guide H-frame structure, it ensures high stability and repeatable precision during pressing operations. CHP Series – Structural Features The CHP series presses are engineered with heavy-duty applications in mind. The frame and supporting components are stress-relieved by vibration method. Bronze Zr14 material used in the slide bearings provides long-lasting and stable operation. Key Advantages - 8-guide H-frame construction - Vibrationally stress-relieved steel structure - Welds performed in accordance with ISO standards - PLC-controlled with touch screen operation - Design focused on operator safety and process stability ⚙️ Standard Equipment Bedex N Tx Sopfx Aatodc - Steel construction, 8-guide H-frame press body - Frame and support parts stress-relieved by vibration - Bronze Zr14 slide bearings - WPQR & WPS certified welding applications, approved by TURK-AK (EN ISO 15614-1:2017 / EN ISO 14731) - Machine design in compliance with CE standards - PLC-controlled hydraulic system - Touchscreen control panel (DELTA 7”) - Adjustable ram stroke and tonnage control - Automatic lubrication system - Electronically controlled filter contamination warning - Real-time monitoring of hydraulic unit oil temperature and system status on the display - Cooling system and off-line filtration - Two-hand control system - Light curtain (standard for operator safety) - SIEMENS – SCHNEIDER electrical components 📐 Technical Specifications – CHP 100 Type: Steel construction, 8-guide H-frame press body Frame Material: St52 – ERDEMIR Slide Bearing: Bronze Zr14 Capacity (Ram): 100 Tons Movable Table Size: 800 × 1000 mm Fixed Table Size: 800 × 1000 mm Parallelism Tolerance: 120 micron/meter Perpendicularity Tolerance: 60 micron/meter Stroke (Ram): 500 mm Min. Daylight: 100 mm Max. Daylight: 600 mm Stress Relief: Vibrational stress relief Welding Application: WPQR and WPS certified by TURK-AK, with EN ISO 15614-1/2017 welding certificates (supervised by welding coordination engineers certified to EN ISO 14731) Max. Working Pressure: 250 Bar Total Motor Power: 11 kW – IE3 Main Pump: 22 cm³ – REXROTH or PARKER Movable Table Rapid Down Speed: 150 mm/s Movable Table Forming Speed: 12 mm/s Movable Table Return Speed: 170 mm/s Main Cylinder Inner Diameter: Ø230 mm – Ck45 Auxiliary Acceleration Cylinders: 2 pcs. Approximate Press Height: 3400 mm Approximate Press Width: 2950 mm Approximate Press Depth: 2000 mm Lower Table Height From Floor: 1250 mm Pre-fill Valve: NG 100 Hydraulic Unit: REXROTH or PARKER Cooling System: EMMEGI – CIESSE – PARKER Off-line Filtration: REXROTH or PARKER Linear Distance Encoder: NOVATECHNIK or TURCK PLC Application: DELTA Touchscreen Panel: DELTA 7” Switchgear: SIEMENS – SCHNEIDER Approximate Weight: 6.5 Tons Manufacturing Note This machine is manufactured by CRONOSSTECH in Turkey.

Κατάσταση: καινούργιο, Έτος κατασκευής: 2025, δύναμη συμπίεσης: 200 t, διαδρομή: 600 χιλ., πλάτος τραπεζιού: 800 χιλ., μήκος τραπεζιού: 1.000 χιλ., λειτουργική πίεση: 250 δοκός, Εξοπλισμός: τεκμηρίωση / εγχειρίδιο, φωτοηλεκτρικός φράκτης ασφαλείας, CRONOSSTECH CHP 200 H-Type Single-Acting Hydraulic Press – 8-Guided Slides General Description The CRONOSSTECH CHP series H-type single-acting hydraulic presses are industrial press solutions with high rigidity, designed for sheet metal forming, straightening, assembly, and die pressing applications. Thanks to their 8-slide H-frame structure, forces generated during pressing are distributed evenly, ensuring stable and repeatable operation. The CHP 200 model is designed for reliable performance and long service life in medium-to-high tonnage applications. CHP Series – Structural Features CHP series presses are engineered for heavy-duty operating conditions. The frame and supporting parts are stress-relieved by vibration methods. The bronze Zr14 slide bearing system ensures smooth ram movement and long-term precision. ⚙️ Standard Equipment - Steel construction, H-type press frame with 8 slides - Frame and supporting components stress-relieved by vibration - Bronze Zr14 slide bearings - WPQR & WPS certified welding by TÜRK-AK accreditation (EN ISO 15614-1:2017 / EN ISO 14731) - Machine structure designed and manufactured to CE standards - PLC-controlled hydraulic system - 7” DELTA touchscreen panel - Adjustable ram stroke and tonnage control - Automatic lubrication system - Electronically controlled filter contamination warning - Monitoring hydraulic unit oil temperature and system status on the display - Cooling system - Off-line filtration - Two-hand control system - Light curtain (standard for operator safety) - SIEMENS – SCHNEIDER switchgear 📐 Technical Specifications – CHP 200 Type: Steel construction, H-frame with 8 slides Bdodpfxsx N T D Uj Aatsc Frame Material: St52 – ERDEMİR Slide Bearings: Bronze Zr14 Capacity (Ram): 200 tons Movable Table Dimensions: 800 × 1000 mm Fixed Table Dimensions: 800 × 1000 mm Parallelism Tolerance: 120 micron/meter Perpendicularity Tolerance: 60 micron/meter Stroke (Ram): 600 mm Min. Daylight Opening: 100 mm Max. Daylight Opening: 700 mm Stress Relief: Vibratory stress relief Welding: WPQR & WPS certified by TÜRK-AK, in accordance with EN ISO 15614-1:2017, supervised by certified welding coordination engineers to EN ISO 14731 Max. Working Pressure: 250 Bar Total Motor Power: 22 kW – IE3 Main Pump: 32 cm³ – REXROTH or PARKER Movable Table Rapid Descent Speed: 150 mm/sec Movable Table Pressing Speed: 12 mm/sec Movable Table Return Speed: 170 mm/sec Main Cylinder Bore: Ø320 mm – Ck45 Auxiliary Acceleration Cylinders: 2 units Approx. Press Height: 3800 mm Approx. Press Width: 2950 mm Approx. Press Depth: 2200 mm Lower Table Height from Floor: 1350 mm Pre-fill Valve: NG 125 Hydraulic Unit: REXROTH or PARKER Cooling System: EMMEGI – CIESSE – PARKER Off-line Filtration: REXROTH or PARKER Linear Distance Scale: NOVATECHNIK or TURCK PLC: DELTA Touchscreen Panel: DELTA 7” Switchgear: SIEMENS – SCHNEIDER Approximate Weight: 8 tons Production Note This machine is manufactured in Turkey by CRONOSSTECH.

Κατάσταση: καινούργιο, Έτος κατασκευής: 2025, δύναμη συμπίεσης: 60 t, διαδρομή: 400 χιλ., πλάτος τραπεζιού: 700 χιλ., μήκος τραπεζιού: 700 χιλ., απόσταση μεταξύ των στηλών: 700 χιλ., δύναμη επαναφοράς: 20 t, λειτουργική πίεση: 250 δοκός, Εξοπλισμός: τεκμηρίωση / εγχειρίδιο, φωτοηλεκτρικός φράκτης ασφαλείας, CRONOSSTECH 60/20 TON FOUR-COLUMN HYDRAULIC DRAWING PRESS General Description The CRONOSSTECH 60/20 ton four-column hydraulic drawing press is a rigid and compact press solution designed for precision metal forming, deep drawing, and metal spinning applications. Its four-column structure ensures stable parallelism and perpendicularity tolerances during the pressing process. Bjdpfx Aajx N Ulgjtodc The frame is manufactured from St52 grade steel and undergoes stress relief via vibration method. The ram and pot systems can be controlled independently, and stroke and pressure adjustments are made precisely via a touchscreen panel. Equipped with REXROTH or PARKER hydraulic components, an IE3 class motor, and an automatic lubrication system, the press offers long service life, safety, and high efficiency. The PLC-controlled system effectively minimizes operator errors. This model is an ideal solution for small and medium-scale metal spinning, deep drawing, die testing, and auxiliary pressing applications. Key Advantages - Rigid four-column press frame construction - Independent stroke and tonnage control for ram and pot - Adjustable system via touchscreen panel - High precision and repeatability - Low maintenance requirement, long service life Fields of Application - Metal spinning applications - Deep drawing operations - Die testing and prototype production - Metal processing and auxiliary production lines ⚙️ STANDARD AND TECHNICAL SPECIFICATIONS TYPE: Four Column FRAME MATERIAL: St52 – ERDEMİR COLUMN SHAFT DIAMETER: Ø 90 mm – 4 pcs. induction-hardened chrome plated shafts SLIDE BEARING: Bronze Zr14 CAPACITY (RAM): 60 Tons CAPACITY (POT): 20 Tons DISTANCE BETWEEN COLUMNS: 700 × 700 mm PARALLELISM TOLERANCE: 120 micron/m. PERPENDICULARITY TOLERANCE: 60 micron/m. STROKE (RAM): 400 mm STROKE (POT): 100 mm MIN. CLEARANCE: 100 mm MAX. CLEARANCE: 500 mm WELD STRESS RELIEF: Vibration stress-relief WELDING APPLICATION: WPQR and WPS certified by TÜRK-AK (EN ISO 15614-1:2017 / EN ISO 14731) MAX. WORKING PRESSURE: 250 Bar TOTAL MOTOR POWER: 7.5 kW – IE3 MAIN PUMP: 22 cm³ – REXROTH or PARKER MOVABLE TABLE FAST DESCENT SPEED: 150 mm/sec MOVABLE TABLE DRAWING SPEED: 12 mm/sec MOVABLE TABLE RETURN SPEED: 170 mm/sec POT TABLE FORWARD SPEED: 30 mm/sec MAIN CYLINDER INNER DIAMETER: Ø 175 mm – Ck45 POT CYLINDER INNER DIAMETER: Ø 100 mm – Ck45 AUXILIARY ACCELERATION CYLINDERS: 2 pcs APPROX. PRESS HEIGHT: 3100 mm APPROX. PRESS WIDTH: 1050 mm APPROX. PRESS DEPTH: 1050 mm DISTANCE FROM FLOOR TO LOWER TABLE: 1000 mm PRE-FILL VALVE: NG 100 HYDRAULIC UNIT: REXROTH or PARKER COOLING SYSTEM: EMMEGI – CIESSE – PARKER OFF-LINE FILTRATION: REXROTH or PARKER LUBRICATION: Automatic (adjustable via screen) RAM / POT STROKE AND TONNAGE ADJUSTMENT: Adjustable via screen SYSTEM & PRESS STATUS INFO: Viewable on screen DIE MEMORY: Adjustable via screen LINEAR POSITION TRANSDUCER: NOVATECHNIK or TURCK PLC SYSTEM: DELTA TOUCHSCREEN PANEL: DELTA 7” SWITCHGEAR COMPONENTS: SIEMENS – SCHNEIDER APPROX. WEIGHT: 5 Tons Production Note This machine is manufactured by CRONOSSTECH in Turkey.

Κατάσταση: καινούργιο, Έτος κατασκευής: 2025, ισχύς: 22 kW (29,91 ίππους), διαδρομή: 310 χιλ., ταχύτητα λειτουργίας: 10 mm/s, ταχύτητα όπισθεν: 110 mm/s, ύψος τραπεζιού: 955 χιλ., βάθος λαιμού: 410 χιλ., πλάτος εργασίας: 4.100 χιλ., μέγ. δύναμη κάμψης: 320 t, απόσταση μεταξύ των στηριγμάτων: 3.600 χιλ., τύπος ελέγχου: CNC έλεγχος, ρύθμιση πίσω στοπ: ελεγχόμενο με CNC, αριθμός αξόνων: 4, τύπος στεφάνωσης: κινητήριος, τύπος ενεργοποίησης: υδραυλικός, Standard Features • Y1, Y2, X, R 4-Axis CNC (X+R Servo) • 410 mm Stroke, 510 mm Throat Depth • ESA S650 CNC Control Unit • Servo motorized back gauge with ±0.03 mm precision, X=750 mm, R=250 mm • European type Promekam quick die clamping system • Sliding front support system • Manual crowning system (Original WILA with cam lock) • Narrow lower table (European type) • GIVI brand linear scales • Standard upper tool (H: 67, 850 R:08) • Standard lower die (60x60 mm, 4-channel V=16-22-35-50 mm, 850 H:60) • LED lighting Optional Features • 4-6-8 axis back gauge options starting from X+R • ROLLERI Roll200 hydraulic die clamping • WILA hydraulic upper and lower die clamping • Wide lower table for multi-channel dies • Back gauge X travel distance 1000 mm • AKAS or DSP laser beam front safety system • Additional back gauge fingers • Additional back gauge tongue TECHNICAL SPECIFICATIONS VALUE Bdodpex Nn I Usfx Aatoc Bending Force (Ton) 320 Bending Length (mm) 4100 Distance Between Side Frames (mm) 3600 Stroke (mm) 310 Open Height (mm) 535 Throat Depth (mm) 410 Table Height (mm) 955 Approach Speed (mm/s) 150 Return Speed (mm/s) 110 Pressing Speed (mm/s) 10 Oil Tank Capacity (L) 290 Machine Weight (kg) 16800 Main Motor (kW) 22 CNC Control Unit ESA S640 Number of CNC Axes Y1-Y2-X-R (4 Axes) Back Gauge X (mm) 750 Back Gauge R (mm) 250 Crowning Manual (WILA cam lock) Safety System Laser front safety Origin Turkey

Κατάσταση: καινούργιο, Έτος κατασκευής: 2025, δύναμη συμπίεσης: 150 t, διαδρομή: 500 χιλ., πλάτος τραπεζιού: 800 χιλ., μήκος τραπεζιού: 1.000 χιλ., λειτουργική πίεση: 250 δοκός, Εξοπλισμός: τεκμηρίωση / εγχειρίδιο, φωτοηλεκτρικός φράκτης ασφαλείας, CRONOSSTECH CHP 150 H-Type Single-Acting Hydraulic Press – 8-Guideway General Description The CRONOSSTECH CHP series H-type single-acting hydraulic presses are industrial presses with a rigid steel construction, designed for sheet metal forming, straightening, assembly, and die pressing applications. Thanks to the 8-guideway H-frame design, the press ensures stable, balanced, and repeatable operation during pressing. The CHP 150 model has been developed to deliver reliable performance and long service life for medium-duty applications. CHP Series – Structural Features CHP series presses are engineered for heavy-duty operation. The frame and supporting components are stress-relieved by vibration. Bronze Zr14 sliding bearings provide smooth load transfer and long-term stable operation. ⚙️ Standard Equipment • Steel construction, 8-guideway H-frame body press • Vibratory stress-relieved frame and support parts • Bronze Zr14 slide bearings • TÜRK-AK accredited WPQR & WPS approved welding applications (EN ISO 15614-1:2017 / EN ISO 14731) • Machine design and manufacture in accordance with CE standards • PLC-controlled hydraulic system • Touchscreen panel (DELTA 7”) • Adjustable ram stroke and tonnage control • Automatic lubrication system • Electronic filter contamination warning system • Monitoring of hydraulic unit oil temperature and system status via display • Cooling system • Off-line filtration • Two-hand operation system • Light curtain (standard for operator safety) • SIEMENS – SCHNEIDER switchgear components 📐 Technical Specifications – CHP 150 Type: Steel construction, 8-guideway H-frame press body Frame Material: St52 – ERDEMİR Guideway Bearings: Bronze Zr14 Capacity (Ram): 150 Ton Moving Table Dimensions: 800 × 1000 mm Fixed Table Dimensions: 800 × 1000 mm Parallelism Tolerance: 120 micron/m Perpendicularity Tolerance: 60 micron/m Stroke (Ram): 500 mm Min. Die Space: 100 mm Max. Die Space: 600 mm Weld Stress Relief: Vibratory stress relief Welding Certification: WPQR and WPS certified by TÜRK-AK, with EN ISO 15614-1/2017 certificate (supervised by certified welding engineers in accordance with EN ISO 14731) Max. Working Pressure: 250 Bar Total Motor Power: 18.5 kW – IE3 Main Pump: 32 cm³ – REXROTH or PARKER Moving Table Fast Descent Speed: 150 mm/s Moving Table Pressing Speed: 12 mm/s Bsdsx N T Dzjpfx Aatedc Moving Table Return Speed: 170 mm/s Main Cylinder Internal Diameter: Ø280 mm – Ck45 Approximate Press Height: 3650 mm Approximate Press Width: 2950 mm Approximate Press Depth: 2000 mm Lower Table Height from Floor: 1250 mm Pre-Fill Valve: NG 100 Hydraulic Unit: REXROTH or PARKER Cooling System: EMMEGI – CIESSE – PARKER Off-line Filtration: REXROTH or PARKER Linear Scale: NOVATECHNIK or TURCK PLC Application: DELTA Touchscreen Panel: DELTA 7” Switchgear: SIEMENS – SCHNEIDER Approximate Weight: 7 Tons Production Note This machine is manufactured by CRONOSSTECH in Turkey.

Κατάσταση: καινούργιο, Έτος κατασκευής: 2025, δύναμη συμπίεσης: 400 t, διαδρομή: 800 χιλ., πλάτος τραπεζιού: 1.200 χιλ., μήκος τραπεζιού: 1.500 χιλ., λειτουργική πίεση: 250 δοκός, Εξοπλισμός: τεκμηρίωση / εγχειρίδιο, φωτοηλεκτρικός φράκτης ασφαλείας, CRONOSSTECH CHP 400 H-Type Single-Acting Hydraulic Press – 8-Guided Slides General Description The CRONOSSTECH CHP series H-type single-acting hydraulic presses are robust industrial press solutions developed for sheet metal forming, straightening, assembly, and die pressing applications. Thanks to its 8-guide H-frame structure, the high loads generated during pressing are evenly distributed, offering stable and repeatable operation. The CHP 400 model is engineered to deliver long-lasting, reliable performance for heavy-duty applications demanding high tonnage. CHP Series – Structural Features CHP series presses are designed with heavy-duty operation in mind. The frame and carrier components are stress-relieved using vibration methods. Bronze Zr14 slide bushings ensure even load distribution during ram movement, which contributes to long-term precision. ⚙️ Standard Equipment Steel construction, H-type press frame with 8 guides Stress-relieved frame and carrier components by vibration Bronze Zr14 slide bushings WPQR & WPS certified welding applications with TÜRK-AK accreditation (EN ISO 15614-1:2017 / EN ISO 14731) Machinery designed and manufactured in compliance with CE standards PLC-controlled hydraulic system Touch panel display (DELTA 7”) Adjustable ram stroke and tonnage control Automatic lubrication system Electronic filter contamination warning Monitoring of hydraulic unit oil temperature and system status via display Cooling system Off-line filtration Two-hand control system Light barrier (standard for operator safety) SIEMENS – SCHNEIDER switchgear components 📐 Technical Specifications – CHP 400 Type: Steel construction, 8-guided H-frame press type Bjdpfex N T Hpsx Aatedc Frame Material: St52 – ERDEMİR Slide Bushings: Bronze Zr14 Capacity (Ram): 400 Ton Movable Table Dimensions: 1200 × 1500 mm Fixed Table Dimensions: 1200 × 1500 mm Parallelism Tolerance: 120 micron/meter Perpendicularity Tolerance: 60 micron/meter Stroke (Ram): 800 mm Min. Daylight: 100 mm Max. Daylight: 900 mm Weld Stress Relief: Stress relieved by vibration Welding Application: WPQR and WPS certified by TÜRK-AK according to EN ISO 15614-1/2017, audited by welding coordination engineers certified to EN ISO 14731 Max. Working Pressure: 250 Bar Total Motor Power: 37 kW – IE3 Main Pump: 45 cm³ – REXROTH or PARKER Movable Table Rapid Descent Speed: 150 mm/sec Movable Table Pressing Speed: 12 mm/sec Movable Table Return Speed: 170 mm/sec Main Cylinder Bore: Ø450 mm – Ck45 Auxiliary Acceleration Cylinders: 2 pcs. Approximate Machine Height: 5600 mm Approximate Machine Width: 3250 mm Approximate Machine Depth: 2200 mm Lower Table Height from Floor: 1400 mm Pre-fill Valve: NG 150 Hydraulic Unit: REXROTH or PARKER Cooling System: EMMEGI – CIESSE – PARKER Off-line Filtration: REXROTH or PARKER Linear Scale: NOVATECHNIK or TURCK PLC Application: DELTA Touch Panel Display: DELTA 7” Switchgear Components: SIEMENS – SCHNEIDER Approx. Weight: 19.5 Tons Production Note This machine is manufactured by CRONOSSTECH in Turkey.

Κατάσταση: καινούργιο, Έτος κατασκευής: 2025, δύναμη συμπίεσης: 2.000 t, διαδρομή: 1.000 χιλ., πλάτος τραπεζιού: 1.500 χιλ., μήκος τραπεζιού: 2.500 χιλ., λειτουργική πίεση: 250 δοκός, Εξοπλισμός: τεκμηρίωση / εγχειρίδιο, φωτοηλεκτρικός φράκτης ασφαλείας, CRONOSSTECH CHP 2000 H-Type Hydraulic Press – 8 Guides General Description The CRONOSSTECH CHP series H-type hydraulic presses are designed for heavy forming, deep drawing, spinning, and die applications that require very high tonnage. The 8-guide H-frame construction ensures maximum rigidity during pressing and maintains parallelism and perpendicularity tolerances throughout the long stroke. The CHP 2000 model, with its large table dimensions, high-capacity hydraulic system, and powerful drive, is a reliable and durable solution for automotive, defense industry, heavy industry, and high-tonnage production lines. The frame structure is stress-relieved by vibration for stable operation. ⚙️ Standard Equipment - Steel construction, H-frame with 8 guides - Stress-relieved frame by vibration - Bronze Zr14 guide bushings - TURK-AK accredited WPQR and WPS certified welding applications (EN ISO 15614-1:2017 / EN ISO 14731) - Design and manufacturing in compliance with CE standards - PLC-controlled hydraulic system - 7” DELTA touchscreen panel - Adjustable ram stroke and tonnage control - Automatic lubrication system - Electronically controlled filter contamination alert - Display of hydraulic unit oil temperature and system status on screen - Cooling system - Off-line filtration - Safety systems for operator protection - SIEMENS – SCHNEIDER switching components 📐 Technical Specifications – CHP 2000 Type: Steel construction, H-frame with 8 guides Frame Material: St52 – ERDEMİR Guide Bushings: Bronze Zr14 Capacity (Ram): 2000 Ton Moving Table Dimensions: 1500 × 2500 mm Fixed Table Dimensions: 1500 × 2500 mm Parallelism Tolerance: 120 micron/m Perpendicularity Tolerance: 60 micron/m Stroke (Ram): 1000 mm Min. Daylight: 200 mm Max. Daylight: 1200 mm Stress Relief: Vibratory stress relief Welding Application: WPQR and WPS certified by TURK-AK under EN ISO 15614-1/2017 welding application certificate Max. Working Pressure: 250 Bar Total Motor Power: 180 kW – IE3 Main Pump: 140 cm³ – REXROTH or PARKER Moving Table Fast Down Speed: 150 mm/s Moving Table Spinning Speed: 12 mm/s Moving Table Return Speed: 170 mm/s Main Cylinder Inner Diameter: Ø720 mm – Ck45 (2 pcs) Bdjdpox N T Srofx Aatsc Auxiliary Acceleration Cylinders: 2 pcs Approx. Press Height: 6300 mm Approx. Press Width: 3850 mm Approx. Press Depth: 2500 mm Lower Table Height from Floor: 1500 mm Pre-fill Valve: NG 200 Hydraulic Unit: REXROTH or PARKER Cooling System: EMMEGI – CIESSE – PARKER Off-line Filtration: REXROTH or PARKER Linear Encoder: NOVATECHNIK or TURCK PLC Application: DELTA Touchscreen Panel: DELTA 7” Switching Components: SIEMENS – SCHNEIDER Approximate Weight: 95 Ton Production Note This machine is manufactured by CRONOSSTECH in Turkey.

Κατάσταση: καινούργιο, Έτος κατασκευής: 2025, δύναμη συμπίεσης: 150 t, διαδρομή: 600 χιλ., πλάτος τραπεζιού: 1.000 χιλ., μήκος τραπεζιού: 1.200 χιλ., δύναμη επαναφοράς: 50 t, λειτουργική πίεση: 250 δοκός, Εξοπλισμός: τεκμηρίωση / εγχειρίδιο, φωτοηλεκτρικός φράκτης ασφαλείας, CRONOSSTECH CHSP 150/50 H-Type Hydraulic Deep Drawing (Spinning) Press – 8-Guided General Description The CRONOSSTECH CHSP series H-type hydraulic deep drawing presses are engineered with a double-acting working principle to ensure controlled material flow during sheet metal forming, deep drawing, and spinning applications. The 8-guided H-frame structure provides maximum rigidity during the pressing process, maintaining stable parallelism and perpendicularity tolerances throughout the stroke. The CHSP 150/50 model is designed for precise and repeatable deep drawing operations with a 150-ton main ram and a 50-ton lower blank holder (pot) capacity. The frame construction is stress-relieved by vibration for long-lasting and reliable operation. ⚙️ Standard Equipment - Steel construction, 8-guide H-frame press body - Vibration stress-relieved frame structure - Bronze Zr14 slideway bearings - TÜRK-AK accredited WPQR and WPS certified welding applications (EN ISO 15614-1:2017 / EN ISO 14731) - Design and manufacturing in compliance with CE standards - PLC-controlled hydraulic system - Touch panel display (DELTA 7”) - Adjustable ram and pot stroke control - Adjustable ram and pot tonnage (pressure) control - Automatic lubrication system - Electronic filter contamination warning - Display of hydraulic unit oil temperature and system status on the screen - Cooling system - Off-line filtration - Safety systems for operator protection - SIEMENS – SCHNEIDER switchgear components 📐 Technical Specifications – CHSP 150/50 Type: Steel construction, 8-guide H-frame press Frame Material: St52 – ERDEMİR Slideway Bearings: Bronze Zr14 Ram Capacity: 150 Ton Pot Capacity: 50 Ton Moving Table Dimensions: 1000 × 1200 mm Fixed Table Dimensions: 1000 × 1200 mm Parallelism Tolerance: 120 micron/m Perpendicularity Tolerance: 60 micron/m Ram Stroke: 600 mm Pot Stroke: 200 mm Min. Daylight: 100 mm Max. Daylight: 700 mm Stress Relieving: By vibration Welding: WPQR and WPS certified by TÜRK-AK EN ISO 15614-1/2017 (Welding applications are supervised by “welding coordination engineers” certified according to EN ISO 14731) Max. Working Pressure: 250 Bar Total Motor Power: 18.5 kW – IE3 Main Pump: 32 cm³ – REXROTH or PARKER Moving Table Fast Down Speed: 150 mm/s Moving Table Drawing Speed: 12 mm/s Moving Table Return Speed: 170 mm/s Pot Table Forward Speed: 30 mm/s Main Cylinder Bore: Ø280 mm – Ck45 Pot Cylinder Bore: Ø160 mm – Ck45 Bdodex N T U Hepfx Aatsc Auxiliary Acceleration Cylinders: 2 units Approx. Press Height: 3650 mm Approx. Press Width: 2950 mm Approx. Press Depth: 2000 mm Lower Table Height from Floor: 1250 mm Pre-Fill Valve: NG 100 Hydraulic Unit: REXROTH or PARKER Cooling System: EMMEGI – CIESSE – PARKER Off-line Filtration: REXROTH or PARKER Linear Position Sensor: NOVATECHNIK or TURCK PLC System: DELTA Touch Panel: DELTA 7” Switchgear: SIEMENS – SCHNEIDER Approximate Weight: 11 Tons Production Note This machine is manufactured by CRONOSSTECH in Turkey.

Κατάσταση: καινούργιο, Έτος κατασκευής: 2025, δύναμη συμπίεσης: 800 t, διαδρομή: 1.000 χιλ., πλάτος τραπεζιού: 1.500 χιλ., μήκος τραπεζιού: 2.000 χιλ., δύναμη επαναφοράς: 270 t, λειτουργική πίεση: 250 δοκός, Εξοπλισμός: τεκμηρίωση / εγχειρίδιο, φωτοηλεκτρικός φράκτης ασφαλείας, CRONOSSTECH CHSP 800/270 H-Type Hydraulic Deep Drawing (Spinning) Press – 8 Gib Guided General Description The CRONOSSTECH CHSP series H-type hydraulic deep drawing presses are designed with a double-acting (ram + die cushion) working principle for high-tonnage sheet metal forming, deep drawing, and spinning applications. The 8-gib H-frame structure ensures high rigidity, stable parallelism, and long die life even for large table sizes during pressing. Bedjx N Uh Ujpfx Aatjdc The CHSP 800/270 model, with its 800-ton main ram and 270-ton die cushion capacity, is specifically developed for processes demanding controlled material flow, particularly in automotive, white goods, defense, and heavy sheet metal forming industries. The steel construction frame, stress-relieved by vibration, provides long-lasting and reliable performance. ⚙️ Standard Equipment • Steel construction, 8-gib H-frame press body • Stress-relieved frame structure via vibration • Bronze Zr14 gib liners • Welding applications with WPQR and WPS approvals certified by TÜRK-AK (EN ISO 15614-1:2017 / EN ISO 14731) • PLC-controlled hydraulic system • Touch panel display (DELTA 7”) • Adjustable ram and die cushion stroke control • Adjustable ram and die cushion tonnage (pressure) control • Automatic lubrication system • Electronic filter contamination warning • On-screen monitoring of hydraulic oil temperature and system status • Off-line filtration and cooling unit • SIEMENS – SCHNEIDER electrical components • Safety systems for operator protection 📐 Technical Specifications – CHSP 800/270 Type: Steel construction, 8-gib H-frame press body Frame Material: St52 – ERDEMİR Gib Liners: Bronze Zr14 Capacity (Ram): 800 Ton Capacity (Die Cushion): 270 Ton Moving Table Size: 1500 × 2000 mm Fixed Table Size: 1500 × 2000 mm Parallelism Tolerance: 120 micron/m Perpendicularity Tolerance: 60 micron/m Stroke (Ram): 1000 mm Stroke (Die Cushion): 350 mm Min. / Max. Daylight: 100 / 1100 mm Max. Working Pressure: 250 Bar Total Motor Power: 75 kW – IE3 Main Pump: 70 cm³ – REXROTH or PARKER Main Cylinder: Ø390 mm – Ck45 (2 units) Die Cushion Cylinder: Ø370 mm – Ck45 Pre-Fill Valve: NG 200 PLC: DELTA Touch Panel: DELTA 7” Approximate Weight: 54 Tons Production Note This machine is manufactured by CRONOSSTECH in Turkey.

Κατάσταση: καινούργιο, Έτος κατασκευής: 2025, δύναμη συμπίεσης: 2.500 t, διαδρομή: 1.000 χιλ., πλάτος τραπεζιού: 1.800 χιλ., μήκος τραπεζιού: 2.600 χιλ., δύναμη επαναφοράς: 800 t, λειτουργική πίεση: 250 δοκός, Εξοπλισμός: τεκμηρίωση / εγχειρίδιο, φωτοηλεκτρικός φράκτης ασφαλείας, CRONOSSTECH CHSP 2500/800 H-Type Hydraulic Deep Drawing (Forming) Press – 8 Guides General Description The CRONOSSTECH CHSP series H-type hydraulic deep drawing presses are designed for heavy-duty deep drawing applications that require very high tonnage, large table sizes, and precise blankholder pressure. The 8-guide H-frame body structure ensures high rigidity during the pressing process, maintaining parallelism and perpendicularity tolerances over long strokes. The CHSP 2500/800 model, with a 2500-ton main ram and 800-ton blankholder capacity, delivers maximum stability, controlled material flow, and repeatable production performance for large and deep draw tooling. The stress-relieved steel construction frame is designed by vibration method for reliable, long-life operation under heavy industrial conditions. ⚙️ Standard Equipment • Steel construction, 8-guide H-frame press body • Stress-relieved body structure via vibration technique • Bronze Zr14 guide bushings • WPQR and WPS-certified welding procedures with TURK-AK accreditation (EN ISO 15614-1:2017 / EN ISO 14731) • PLC-controlled hydraulic system • Touch panel display (DELTA 7”) • Adjustable ram and blankholder stroke control • Adjustable ram and blankholder tonnage (pressure) control • Automatic lubrication system • Electronically monitored filter contamination warning • Monitoring of hydraulic unit oil temperature and system status via display • Off-line filtration and industrial cooling system • SIEMENS – SCHNEIDER electrical components • Heavy-duty industrial safety systems Bedox N Uk Aopfx Aatedc 📐 Technical Specifications – CHSP 2500/800 Type: Steel construction, 8-guide H-frame press body Frame Material: St52 – ERDEMİR Guide Bushings: Bronze Zr14 Capacity (Ram / Blankholder): 2500 / 800 tons Moving / Fixed Table: 1800 × 2600 mm Parallelism / Perpendicularity: 120 / 60 micron/meter Stroke (Ram / Blankholder): 1000 / 350 mm Daylight Opening (Min / Max): 200 / 1200 mm Max. Working Pressure: 250 Bar Total Motor Power: 180 kW – IE3 Main Pump: 140 cm³ – REXROTH or PARKER Main Cylinder: Ø565 mm – Ck45 (4 units) Blankholder Cylinder: Ø450 mm – Ck45 (2 units) Pre-fill Valve: NG 200 PLC / Panel: DELTA / DELTA 7” Approximate Weight: 132 tons Production Note This machine is manufactured by CRONOSSTECH in Turkey.

Κατάσταση: καινούργιο, Έτος κατασκευής: 2025, δύναμη συμπίεσης: 250 t, διαδρομή: 800 χιλ., πλάτος τραπεζιού: 1.200 χιλ., μήκος τραπεζιού: 1.500 χιλ., δύναμη επαναφοράς: 80 t, λειτουργική πίεση: 250 δοκός, Εξοπλισμός: τεκμηρίωση / εγχειρίδιο, φωτοηλεκτρικός φράκτης ασφαλείας, CRONOSSTECH CHSP 250/80 H-Type Hydraulic Deep Drawing (Spinning) Press – 8-Gib Design General Description The CRONOSSTECH CHSP series H-type hydraulic deep drawing presses are engineered with a double-acting operation principle to provide precise material flow control during sheet metal forming, deep drawing, and spinning applications. The H-frame structure with 8 gibs ensures maximum rigidity throughout the pressing cycle, maintaining parallelism and perpendicularity tolerances consistently along the stroke. The CHSP 250/80 model is designed for medium to high tonnage deep drawing and spinning operations, featuring a 250-ton main ram and an 80-ton cushion (blankholder) capacity. The frame construction is stress-relieved by vibration, offering durability and reliable long-term performance. ⚙️ Standard Equipment - Steel construction, 8-gib H-frame press body - Stress-relieved structure via vibration technique - Bronze Zr14 gib bushings - WPQR and WPS approved welding applications by TÜRK-AK accredited authorities (EN ISO 15614-1:2017 / EN ISO 14731) - Design and manufacturing in compliance with CE standards - PLC-controlled hydraulic system - 7" DELTA touch panel interface - Adjustable ram and cushion stroke control - Adjustable ram and cushion tonnage (pressure) control - Automatic lubrication system - Electronic filter contamination warning - Real-time monitoring of hydraulic unit oil temperature and system status on screen - Cooling system - Off-line filtration - Safety systems for operator protection - SIEMENS – SCHNEIDER electrical equipment 📐 Technical Specifications – CHSP 250/80 Type: Steel construction, 8-gib H-frame press body Frame Material: St52 – ERDEMIR Gib Bushing: Bronze Zr14 Capacity (Ram): 250 Ton Capacity (Cushion): 80 Ton Moving Table Size: 1200 × 1500 mm Fixed Table Size: 1200 × 1500 mm Parallelism Tolerance: 120 micron/m Perpendicularity Tolerance: 60 micron/m Stroke (Ram): 800 mm Stroke (Cushion): 300 mm Min. Daylight: 100 mm Max. Daylight: 900 mm Stress Relief: Vibration stress-relieving Welding Applications: WPQR and WPS approved by TÜRK-AK EN ISO 15614-1:2017 (All welding operations are supervised by certified welding coordination engineers as per EN ISO 14731) Max. Working Pressure: 250 Bar Total Motor Power: 37 kW – IE3 Main Pump: 45 cm³ – REXROTH or PARKER Moving Table Fast Down Speed: 150 mm/sec Moving Table Drawing Speed: 12 mm/sec Moving Table Return Speed: 170 mm/sec Cushion Table Forward Speed: 30 mm/sec Main Cylinder Bore: Ø360 mm – Ck45 Cushion Cylinder Bore: Ø200 mm – Ck45 Auxiliary Acceleration Cylinders: 2 units Approximate Press Height: 4200 mm Approximate Press Width: 3250 mm Approximate Press Depth: 2200 mm Bdodpfxjx N Uaqs Aatec Bottom Table Height from Floor: 1350 mm Pre-fill Valve: NG 125 Hydraulic Unit: REXROTH or PARKER Cooling System: EMMEGI – CIESSE – PARKER Off-line Filtration: REXROTH or PARKER Linear Scale: NOVATECHNIK or TURCK PLC Unit: DELTA Touch Panel Display: DELTA 7" Electrical Components: SIEMENS – SCHNEIDER Approximate Weight: 18 Ton Production Note This machine is manufactured by CRONOSSTECH in Turkey.