Ημιρυμουλκούμενο ανατρεπόμενοSTAS
V-OP 10.50 57m³
Ημιρυμουλκούμενο ανατρεπόμενο
STAS
V-OP 10.50 57m³
σταθερή τιμή δεν συμπεριλαμβάνεται ΦΠΑ
22.780 €
Κατάσταση
Μεταχειρισμένο
Τοποθεσία
Korschenbroich-Glehn 

Προβολή φωτογραφιών
Εμφάνιση χάρτη
Στοιχεία για το μηχάνημα
- Περιγραφή μηχανήματος:
- Ημιρυμουλκούμενο ανατρεπόμενο
- Κατασκευαστής:
- STAS
- Μοντέλο:
- V-OP 10.50 57m³
- Κατάσταση:
- μεταχειρισμένο
Τιμή & Τοποθεσία
σταθερή τιμή δεν συμπεριλαμβάνεται ΦΠΑ
22.780 €
- Τοποθεσία πωλητή:
- Dieselstr. 9, 41352 Korschenbroich-Glehn, Γερμανία
Κλήση
Τεχνικές λεπτομέρειες
- Διάταξη αξόνων:
- 3 άξονες
- Μήκος χώρου φόρτωσης:
- 10.500 χιλ.
- Πλάτος χώρου φόρτωσης:
- 2.480 χιλ.
- Ύψος χώρου φόρτωσης:
- 2.200 χιλ.
- Όγκος χώρου φόρτωσης:
- 57 m³
- Πρώτη ταξινόμηση:
- 12/2009
Λεπτομέρειες προσφοράς
- ID Καταχώρησης:
- A20066005
- Αριθμός Αναφοράς:
- 2380
- Τελευταία ενημέρωση:
- στις 25.09.2025
Περιγραφή
Chassis
In aluminium
Two fully automatic welded I-section longitudinal beams with welded cross-members. Chassis width: 1,600 mm
Axles and Suspension Disc Brake Weightmaster
DC axle assemblies type DCA 3 x 9 t with DC air suspension, air bellows centrally positioned on the chassis longitudinal beam, lift axle with starting aid and manual forced lowering, load pressure gauge, lift/lower valve, BVA brake wear indicator
Tyres and Wheels
6 wheels with tyres size 385/65 R 22.5, approx. 50-60% tread, with steel rims 11.75 x 22.5 ET 120, UNI wheel bolts
Landing Legs
Mechanical landing gears with two speeds, 2x 20 t static load, tilting feet for use with air suspension
Fsdpfx Aaoxfn Azsaepn
Brake System
In accordance with E.G. standard, two-line Wabco system, spring-loaded parking brake acting on two axles, Wabco EBS-D+ system, aluminium air tank system
Electrical System
In accordance with German STVZO guidelines, with 2 Aspöck five-chamber tail lights, 24 volt system with 2x7 and 1x15 pin sockets with side marker lights, 1 separate halogen reversing light (right side interior), 2 additional halogen work lights mounted laterally behind the landing gear (at underrun protection height)
Tipping Body / Mulde Body, internally fully welded
Aluminium tipping body, side walls made of 30 mm thick plank profiles (2-3 mm), 600 mm wide, welded, floor panel made from 6 mm high-wear-resistant alloy (5383H34/HB 110), front wall 4 mm reinforced, straight design, rear wall as universal door in straight design with 2 wing doors in 2/3-1/3 configuration and a grain chute, rubber seals at lateral and lower edges of the rear doors for tight closure, rear doors partially clad in smooth aluminium, universal door operated automatic-pneumatic with separate lockable lever, rear hoop made of ALU, foldable, two hold-downs with rubber buffers at the front wall frame
Hydraulic System
Hydraulic cylinder mounted on the front wall, operating pressure 135 bar, make: Edbro, 150 bar with 1" fixed connection
Accessories
6 Parlok mudguards, ALU spare wheel holder, foldable side underrun protection on the right, 2 Nirosta toolboxes on the left, approx. 3 m aluminium ladder, 3 mid-mounted aluminium tilting canopy bows raised by approx. 150 mm, additionally a centrally positioned bow holder for the mounting of up to 2 bows to widen the loading width, tarpaulin with central light strip and additional reinforcements in high-wear areas (approx. 660g/m² quality) with rolling system, perimeter rubber cord at the rear tarpaulin edge with two tension hooks to secure on the rear canopy bow, walkway on the frame, side tarpaulin closure with tension straps, rear tarpaulin closure using large aluminium cover plate and roll-up tarpaulin at the rear with welded rubber cord to prevent water ingress, robust foldable underrun protection in aluminium with two towing eyes left and right (including locator bolts), 2 longitudinal tension belts mounted inside the body, etc.
Offer and images subject to change without notice.
Η διαφήμιση μεταφράστηκε αυτόματα και ενδέχεται να περιέχει ορισμένα σφάλματα μετάφρασης.
In aluminium
Two fully automatic welded I-section longitudinal beams with welded cross-members. Chassis width: 1,600 mm
Axles and Suspension Disc Brake Weightmaster
DC axle assemblies type DCA 3 x 9 t with DC air suspension, air bellows centrally positioned on the chassis longitudinal beam, lift axle with starting aid and manual forced lowering, load pressure gauge, lift/lower valve, BVA brake wear indicator
Tyres and Wheels
6 wheels with tyres size 385/65 R 22.5, approx. 50-60% tread, with steel rims 11.75 x 22.5 ET 120, UNI wheel bolts
Landing Legs
Mechanical landing gears with two speeds, 2x 20 t static load, tilting feet for use with air suspension
Fsdpfx Aaoxfn Azsaepn
Brake System
In accordance with E.G. standard, two-line Wabco system, spring-loaded parking brake acting on two axles, Wabco EBS-D+ system, aluminium air tank system
Electrical System
In accordance with German STVZO guidelines, with 2 Aspöck five-chamber tail lights, 24 volt system with 2x7 and 1x15 pin sockets with side marker lights, 1 separate halogen reversing light (right side interior), 2 additional halogen work lights mounted laterally behind the landing gear (at underrun protection height)
Tipping Body / Mulde Body, internally fully welded
Aluminium tipping body, side walls made of 30 mm thick plank profiles (2-3 mm), 600 mm wide, welded, floor panel made from 6 mm high-wear-resistant alloy (5383H34/HB 110), front wall 4 mm reinforced, straight design, rear wall as universal door in straight design with 2 wing doors in 2/3-1/3 configuration and a grain chute, rubber seals at lateral and lower edges of the rear doors for tight closure, rear doors partially clad in smooth aluminium, universal door operated automatic-pneumatic with separate lockable lever, rear hoop made of ALU, foldable, two hold-downs with rubber buffers at the front wall frame
Hydraulic System
Hydraulic cylinder mounted on the front wall, operating pressure 135 bar, make: Edbro, 150 bar with 1" fixed connection
Accessories
6 Parlok mudguards, ALU spare wheel holder, foldable side underrun protection on the right, 2 Nirosta toolboxes on the left, approx. 3 m aluminium ladder, 3 mid-mounted aluminium tilting canopy bows raised by approx. 150 mm, additionally a centrally positioned bow holder for the mounting of up to 2 bows to widen the loading width, tarpaulin with central light strip and additional reinforcements in high-wear areas (approx. 660g/m² quality) with rolling system, perimeter rubber cord at the rear tarpaulin edge with two tension hooks to secure on the rear canopy bow, walkway on the frame, side tarpaulin closure with tension straps, rear tarpaulin closure using large aluminium cover plate and roll-up tarpaulin at the rear with welded rubber cord to prevent water ingress, robust foldable underrun protection in aluminium with two towing eyes left and right (including locator bolts), 2 longitudinal tension belts mounted inside the body, etc.
Offer and images subject to change without notice.
Η διαφήμιση μεταφράστηκε αυτόματα και ενδέχεται να περιέχει ορισμένα σφάλματα μετάφρασης.
Προμηθευτής
Σημείωση: Εγγραφείτε δωρεάν ή συνδεθείτε, για να αποκτήσετε πρόσβαση σε όλες τις πληροφορίες.
Εγγεγραμμένο μέλος από το: 2002
Υποβολή αιτήματος
Τηλέφωνο & Φαξ
+49 2182 ... αγγελίες
Η αγγελία σας διαγράφηκε με επιτυχία
Παρουσιάστηκε σφάλμα